Date: Mon, 20 May 2013 07:25:30 -0600 From: Warner Losh <imp@bsdimp.com> To: Milan Obuch <freebsd-mips@dino.sk> Cc: Aleksandr Rybalko <ray@ddteam.net>, freebsd-mips@freebsd.org Subject: Re: Ubiquiti EdgeRouter Lite works multi-user with -CURRENT. Message-ID: <D1F45DEB-3C3C-42D1-8EDE-94B18AB32152@bsdimp.com> In-Reply-To: <20130520110659.1d1d2165@zeta.dino.sk> References: <CACVs6=_UHMvo6DSyXzvXxJ0eCcSsC%2Bk3yZ42ia5TGzgHduT2zA@mail.gmail.com> <20130516111059.38543d57@wind.dino.sk> <20130516131642.adfae355aa3bf7767e9b56e5@ddteam.net> <20130516124248.33ae4e05@wind.dino.sk> <51952112.9010607@rewt.org.uk> <20130517192206.5db0533f@zeta.dino.sk> <51966CB6.2040701@rewt.org.uk> <CACVs6=-0URQ2f7UqVxRdpuGpf103KOW9CTF6FFCGaGhvg3jOMw@mail.gmail.com> <20130520110659.1d1d2165@zeta.dino.sk>
next in thread | previous in thread | raw e-mail | index | archive | help
On May 20, 2013, at 3:06 AM, Milan Obuch wrote: > On Fri, 17 May 2013 10:52:47 -0700, Juli Mallett = <jmallett@FreeBSD.org> > wrote: >=20 >> On Fri, May 17, 2013 at 10:45 AM, Joe Holden <lists@rewt.org.uk> >> wrote: >>> 16 possible pins on the controller? There is only one pin on the >>> board, and that is the F/D button on the back. >>=20 >> Octeon supports up to 16 GPIO pins and interrupts. I'd suspect there >> are other things connected up with GPIO on-board than GPIO pins >> exposed to the outside world, but even if that's not the case, that's >> still the number of GPIO pins the SoC supports. >>=20 >> It's possible that the EdgeRouter Lite uses a different pin for its >> F/D button. According to the driver, gonzo used the CAM-0100's pin >> assignment as the default. It should be easy to extract a list of = pin >> assignments we care about from looking at the patches from Ubiquiti = to >> the Simple Executive and Linux, but I haven't looked personally. (I >> don't ever use GPIO on Octeon.) >>=20 >> The octeon_gpio_pins array probably needs to be configured at boot >> based on board type. (So it should normally be 16 items (or 16 plus = a >> terminator) and get filled out by board type, I'd say.) >>=20 >> Thanks, >> Juli. >=20 > Hi, >=20 > I am trying to compile new kernel to test GPIO pins, however, no > success for some time - kernel linking ends with error: >=20 > linking kernel.debug > ld: kernel.debug: warning: allocated section `.sdata' not in segment > ethernet-common.o: In function `cvm_assign_mac_address': > /usr/src/sys/mips/cavium/octe/ethernet-common.c:110: undefined > reference to > `cvmx_mgmt_port_num_ports' = /usr/src/sys/mips/cavium/octe/ethernet-common.c:110: > relocation truncated to fit: R_MIPS_26 against > `cvmx_mgmt_port_num_ports' *** Error code 1 >=20 > Searching in /sys/mips/cavium for cvmx_mgmt_port_num_ports is not > successfull - any insight here? This is in the sys/contrib/octeon-sdk tree. I've built kernels since = then. Warner=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?D1F45DEB-3C3C-42D1-8EDE-94B18AB32152>