Date: Tue, 13 Jan 2004 09:37:22 -0800 From: Randy Bush <randy@psg.com> To: sos@deepcore.dk Cc: Jeffrey Katcher <jmkatcher@yahoo.com> Subject: Re: 5.2-CURRENT panic on startup after cvsup: probably recent ATA Message-ID: <E1AgSTh-0004DM-U5@ran.psg.com> References: <20040113171700.68409.qmail@web41105.mail.yahoo.com> <200401131733.i0DHXNg5007607@spider.deepcore.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
>> ata1: reiniting channel .. >> ata1: reset tp1 mask=03 ostat0=00 ostat1=00 >> ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb >> ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb >> ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> >> ata1: resetting done .. >> ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin >> ata1-master: setting PIO4 on Intel ICH4 chip >> ata1-master: setting PIO4 on Intel ICH4 chip >> ata1: device config done .. >> >> Fatal trap 12: page fault while in kernel mode >> >> Is that any help? > > And what do youhave on ata1 ? one ATAPI device as master ? in my case, there is nothing on ata1. well, at least no devices ... # dmesg | grep ata atapci0: <Intel ICH4 UDMA100 controller> port 0x1860-0x186f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] ad0: 54164MB <HTS726060M9AT00> [110048/16/63] at ata0-master UDMA100 acd0: CDRW <UJDA745 DVD/CDRW> at ata1-master UDMA33 randy
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1AgSTh-0004DM-U5>