Date: Sat, 05 Apr 2008 21:47:17 +0100 From: "James O'Gorman" <james@netinertia.co.uk> To: FreeBSD-gnats-submit@FreeBSD.org Subject: amd64/122473: System hangs after "Uptime" on shutdown/reboot Message-ID: <E1JiFID-00046c-NL@starbug.netinertia.co.uk> Resent-Message-ID: <200804052050.m35Ko33J022190@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 122473 >Category: amd64 >Synopsis: System hangs after "Uptime" on shutdown/reboot >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-amd64 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sat Apr 05 20:50:03 UTC 2008 >Closed-Date: >Last-Modified: >Originator: James O'Gorman >Release: FreeBSD 7.0-RELEASE amd64 >Organization: >Environment: System: FreeBSD queeg.waterloo.netinertia.co.uk 7.0-RELEASE FreeBSD 7.0-RELEASE #1: Sat Apr 5 18:04:56 BST 2008 root@queeg.waterloo.netinertia.co.uk:/usr/obj/usr/src/sys/ML110 amd64 >Description: System is an HP ML110 G5 running FreeBSD 7.0-RELEASE amd64. When issuing any shutdown command (shutdown -p, shutdown -r, reboot) the system will hang af ter the "Uptime" message. The system has to be reset by physically holding the power button or issui ng a power cycle from the Lights Out interface. dmesg.boot is attached. The zfs and ipmi modules are loaded from /boot/loader.conf, and I have tried enabling watchd ogd or using "watchdog -t 60; reboot" as suggested on -stable@ which apparently works on i386, but d oes not work on amd64. I tried building a GENERIC kernel with DDB enabled, but this caused the system to hang at bo to when probing for the root filesystem. >How-To-Repeat: Issue one of the following commands: * shutdown -p now * shutdown -r now * reboot The system will hang after "Uptime:" >Fix: --- dmesg.boot begins here --- Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #1: Sat Apr 5 18:04:56 BST 2008 root@queeg.waterloo.netinertia.co.uk:/usr/obj/usr/src/sys/ML110 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU 3065 @ 2.33GHz (2327.51-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 usable memory = 1061593088 (1012 MB) avail memory = 1022644224 (975 MB) ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 hptrr: HPT RocketRAID controller driver v1.1 (Apr 5 2008 18:04:51) acpi0: <PTLTD XSDT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 72a072a0600072a device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 72a072a0600072a device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x2000-0x201f mem 0xec120000-0xec13ffff,0xec100000-0xec11ffff irq 16 at device 0.0 on pci1 em0: Using MSI interrupt em0: Ethernet address: 00:1b:21:0e:c9:96 em0: [FILTER] uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 16 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 17 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device 26.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xec000000-0xec0003ff irq 18 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 6 ports with 6 removable, self powered pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci5: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci9: <ACPI PCI bus> on pcib3 em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x3000-0x301f mem 0xec220000-0xec23ffff,0xec200000-0xec21ffff irq 18 at device 0.0 on pci9 em1: Using MSI interrupt em1: Ethernet address: 00:1b:21:0e:ab:3a em1: [FILTER] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci13: <ACPI PCI bus> on pcib4 vgapci0: <VGA-compatible display> mem 0xee000000-0xeeffffff,0xec300000-0xec303fff,0xec800000-0xecffffff irq 16 at device 0.0 on pci13 pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 pci14: <ACPI PCI bus> on pcib5 pci14: <network, ethernet> at device 0.0 (no driver attached) uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at device 29.0 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: <UHCI (generic) USB controller> on uhci3 usb4: USB revision 1.0 uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: <UHCI (generic) USB controller> port 0x18a0-0x18bf irq 17 at device 29.1 on pci0 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: <UHCI (generic) USB controller> on uhci4 usb5: USB revision 1.0 uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 uhub5: 2 ports with 2 removable, self powered uhci5: <UHCI (generic) USB controller> port 0x18c0-0x18df irq 18 at device 29.2 on pci0 uhci5: [GIANT-LOCKED] uhci5: [ITHREAD] usb6: <UHCI (generic) USB controller> on uhci5 usb6: USB revision 1.0 uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 uhub6: 2 ports with 2 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0xec000400-0xec0007ff irq 16 at device 29.7 on pci0 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb7: EHCI version 1.0 usb7: companion controllers, 2 ports each: usb4 usb5 usb6 usb7: <EHCI (generic) USB 2.0 controller> on ehci1 usb7: USB revision 2.0 uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7 uhub7: 6 ports with 6 removable, self powered pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci17: <ACPI PCI bus> on pcib6 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH8 SATA300 controller> port 0x1c50-0x1c57,0x1c44-0x1c47,0x1c48-0x1c4f,0x1c40-0x1c43,0x18e0-0x18ff mem 0xec000800-0xec000fff irq 17 at device 31.2 on pci0 atapci0: [ITHREAD] atapci0: AHCI called from vendor specific driver atapci0: AHCI Version 01.20 controller with 4 ports detected ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: [ITHREAD] ata5: <ATA channel 3> on atapci0 ata5: port not implemented ata5: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci1: <Intel ICH9 SATA300 controller> port 0x1c68-0x1c6f,0x1c5c-0x1c5f,0x1c60-0x1c67,0x1c58-0x1c5b,0x1c30-0x1c3f,0x1c20-0x1c2f irq 18 at device 31.5 on pci0 atapci1: [ITHREAD] ata6: <ATA channel 0> on atapci1 ata6: [ITHREAD] ata7: <ATA channel 1> on atapci1 ata7: [ITHREAD] ipmi0: <IPMI System Interface> port 0xca2-0xca3 on acpi0 ipmi0: KCS mode found at io 0xca2 on acpi acpi_button0: <Power Button> on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console sio0: [FILTER] ipmi1: <IPMI System Interface> on isa0 device_attach: ipmi1 attach returned 16 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcdfff,0xdc000-0xdffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled ukbd0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on uhub4 kbd2 at ukbd0 uhid0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on uhub4 WARNING: ZFS is considered to be an experimental feature in FreeBSD. Timecounters tick every 1.000 msec hptrr: no controller detected. ZFS filesystem version 6 ZFS storage pool version 6 ad4: 238475MB <Seagate ST3250620NS 3BJP> at ata2-master SATA150 ad6: 715404MB <Seagate ST3750330NS SN04> at ata3-master SATA150 ad8: 715404MB <Seagate ST3750330NS SN04> at ata4-master SATA150 acd0: DVDR <HL-DT-ST DVD-RAM GSA-H60L/E904> at ata6-master SATA150 ipmi0: IPMI device rev. 1, firmware rev. 3.2, version 2.0 ipmi0: Number of channels 1 ipmi0: Attached watchdog SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad4s1a --- dmesg.boot ends here --- >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1JiFID-00046c-NL>