Date: Sat, 23 Apr 2011 02:30:39 -0700 From: Doug Hardie <bc979@lafn.org> To: Erich Dollansky <erichfreebsdlist@ovitrap.com> Cc: freebsd-questions@freebsd.org Subject: Re: Help with Booting Message-ID: <F205AE44-596F-4D85-AB9F-902590465CA3@lafn.org> In-Reply-To: <201104231620.16475.erichfreebsdlist@ovitrap.com> References: <C249647E-1186-4AC2-8028-2C09326F77F0@lafn.org> <201104231346.25403.erichfreebsdlist@ovitrap.com> <D77EEA88-C85D-47E8-9684-67C2008209CE@lafn.org> <201104231620.16475.erichfreebsdlist@ovitrap.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 23 April 2011, at 02:20, Erich Dollansky wrote: > Hi, >=20 > I only can tell what I do when a machine does not boot from the = installation media: I plug the disk into another machine, install the = generic kernel, edit /etc and put it back. >=20 > If this does not work, it will be hard. That works, but then I end up without having RAID activated. I am = trying to get the hardware RAID working. >=20 > Erich >=20 > On Saturday 23 April 2011 14:25:13 Doug Hardie wrote: >>=20 >> On 22 April 2011, at 23:46, Erich Dollansky wrote: >>=20 >>> Hi, >>>=20 >>> On Saturday 23 April 2011 12:57:32 Doug Hardie wrote: >>>>=20 >>>> On 22 April 2011, at 21:28, Erich Dollansky wrote: >>>>=20 >>>>> It looks to me that not even the loader loads. Is this true? >>>>>=20 >>>> I am not sure. The last message is the timestamp from the original = distribution build. Then is a line with just the '/' character that = should spin a bit. It doesn't. =20 >>>>=20 >>>> By playing around a bit I got it a bit farther. I took one of the = raid disks and mounted it in a different system. I did an install on it = but without changing the label other than to use all the disk. Then I = put it back in the production system and booted. It appears to retain = the RAID characteristics, but all I get is a '-' at the top left of the = screen. I then plugged in the memstick image and booted from that. = Right after the last DOS window I pressed F10 which took me to a FreeBSD = boot line with the default pointing to ad0. I used = 0:ad(4,a)/boot/loader and it went on to the same point as before, but = then a bit farther. I now see: >>>>=20 >>> this is all to weird for me. Could you install a disk not using the = raid hardware? >>>=20 >>> It would then exclude the motherboard as the cause. >>>=20 >>> Erich >>=20 >> No. That didn't work either. I had been using the machine on amd64 = but I had to install with the drive on another system. I couldn't get = it to boot of CD or memstick. However, the memstick I used then was = dead today so I bought a new one hoping that was the problem. = Unfortunately this stick is good, but it still won't boot off it. >>=20 >>=20 >>>=20 >>>=20 >>>> Loading /boot/defaults/loader.conf >>>> /boot/kernel/kernel text=3D0x8ffac1 | >>>>=20 >>>> The '|' normally spins a couple of times and moves on to the next = section. However, its hung there now. >>>>=20 >>>>=20 >>>>>=20 >>>>> On Saturday 23 April 2011 05:38:41 Doug Hardie wrote: >>>>>> I have an AMD based system that is driving me nuts. I am trying = to install 8.2 on it but can't get past the first boot. I had a system = up and running on it before, but I had to remove a drive and do the = install on another computer. That worked, but now I need to use the = built in RAID hardware. As best as I can tell I am going to have to = install on the the actual hardware. Motherboard is an Arima NM46X. The = machine appears to be about 6 years old. >>>>>>=20 >>>>>> I have tried to boot the install disk, the live filesystem disk, = and the memstick image for FreeBSD 7.0 through 8.2. All of them do = exactly the same thing: >>>>>>=20 >>>>>> Bootstart starts. >>>>>>=20 >>>>>> BTX loader lists the drives and memory >>>>>>=20 >>>>>> FreeBSD bootstrap loader version 1.1 starts. I get the build = date and then a new line with just a '/' on it. It never begins to = spin. No additional I/O occurs with the boot device. >>>>>>=20 >>>>>> The memstick and CDs are good. They boot just fine on another = computer, just not this one. I have had to work around CD issues in the = past, but I thought the memstick would work if the BIOS would recognize = it and boot from it. It recognizes it and tries to boot. I need some = ideas here as the RAID is essential for this application. Thanks, >>>>>>=20 >>>>>>=20 >>>>>> _______________________________________________ >>>>>> freebsd-questions@freebsd.org mailing list >>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions >>>>>> To unsubscribe, send any mail to = "freebsd-questions-unsubscribe@freebsd.org" >>>>>>=20 >>>>>>=20 >>>>>=20 >>>>=20 >>>>=20 >>>>=20 >>>=20 >>=20 >>=20 >>=20 >=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F205AE44-596F-4D85-AB9F-902590465CA3>