Date: Mon, 19 Aug 1996 21:33:35 -0400 (EDT) From: Dave <partek@truly.indecent.com> To: questions@freebsd.org Subject: Sound Blaster support in 2.1.5R Message-ID: <Pine.BSF.3.91.960819213100.6748A-100000@truly.indecent.com>
next in thread | raw e-mail | index | archive | help
When trying to compile the sb/sb16 support into my kernel, I get this: loading kernel ioconf.o: Undefined symbol `_sbdriver' referenced from data segment ioconf.o: Undefined symbol `_sbintr' referenced from data segment *** Error code 1 If I felt like messing with it for a few hours, I'm sure I could figure it out.. But I'm planning a move and have been working alot lately, so I don't really wanna spend the time :) Here's my kernel config file if it's any help. TIA, Dave # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # $Id: GENERIC,v 1.46.2.18 1996/07/16 08:53:04 davidg Exp $ # machine "i386" #cpu "I386_CPU" #cpu "I486_CPU" cpu "I586_CPU" ident TRULY maxusers 10 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 #options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console options SYSVSHM options SYSVSEM options SYSVMSG config kernel root on wd0 controller isa0 #controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 #tape ft0 at fdc0 drive 2 controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus device wcd0 #IDE CD-ROM #controller ncr0 #controller ahb0 #controller ahc0 #controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr #controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr #controller aic0 at isa? port 0x340 bio irq 11 vector aicintr #controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr #controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr #controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr #controller scbus0 #device sd0 #device st0 #device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr #device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1 #options XSERVER # include code for XFree86 # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Mandatory, don't remove device npx0 at isa? port "IO_NPX" irq 13 vector npxintr # # Laptop support (see LINT for more options) # #device apm0 at isa? # Advanced Power Management #options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr #device lpt1 at isa? port? tty #device mse0 at isa? port 0x23c tty irq 5 vector mseintr #device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12 vector psmintr device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr #device sbxvi0 at isa? drq 5 #device sbmidi0 at isa? port 0x330 device qcam0 at isa? port "IO_LPT1" tty # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device de0 #device fxp0 #device vx0 device ed0 at isa? port 0x320 net irq 11 iomem 0xd8000 vector edintr #device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr #device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr #device ep0 at isa? port 0x300 net irq 10 vector epintr #device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr #device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr pseudo-device loop pseudo-device ether pseudo-device log #pseudo-device sl 1 # ijppp uses tun instead of ppp device #pseudo-device ppp 1 #pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.960819213100.6748A-100000>