Date: Sat, 22 Aug 1998 20:13:28 +0500 (KSD) From: "Vladimir A. Petrov" <V.Petrov@VAZ.ru> To: FreeBSD questions mail list <Freebsd-questions@FreeBSD.ORG> Subject: Troubles with cdrecord, AHA-1540CF and RICOH MP 6200S Message-ID: <Pine.BSF.3.96.980822184654.4232C-100000@asm.vaz.ru>
next in thread | raw e-mail | index | archive | help
Good day! I have troubles with installation CD-RW RICOH MP 6200S under FreeBSD 2.2.6-STABLE and cdrecord 1.6 from ports collection. My main problem is I can't get cdrecord working, but not only it. My system: FreeBSD 2.2.6-STABLE #0: Tue Aug 18 22:38:05 SAMST 1998 vap@halfwasp.asm.vaz.ru:/mnt/src/sys/compile/halfwasp-2.2.6-1.2.0e CPU: Pentium (119.75-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x526 Stepping=6 Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> real memory = 25165824 (24576K bytes) avail memory = 22884352 (22348K bytes) Probing for devices on PCI bus 0: chip0 <Intel 82437FX PCI cache memory controller> rev 2 on pci0:0:0 chip1 <Intel 82371FB PCI-ISA bridge> rev 2 on pci0:7:0 chip2 <Intel 82371FB IDE interface> rev 2 on pci0:7:1 vga0 <VGA-compatible display device> rev 84 int a irq 5 on pci0:19:0 Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 at 0x280-0x29f irq 10 maddr 0xd0000 msize 16384 on isa ed0: address 00:00:c0:aa:70:29, type WD8013EP (16 bit) sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 flags 0x80ff on isa wdc0: unit 0 (wd0): <WDC AC21000H>, 32-bit, multi-block-16 wd0: 1033MB (2116800 sectors), 2100 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): <655A/5.2D>, removable, iordy atapi1.0: unknown phase aha0 at 0x330-0x333 irq 11 drq 5 on isa (aha0:0:0): "SEAGATE ST51080N 0958" type 0 fixed SCSI 2 sd0(aha0:0:0): Direct-Access 1030MB (2109840 512 byte sectors) sd0(aha0:0:0): with 4826 cyls, 4 heads, and an average 109 sectors/track (aha0:1:0): "RICOH MP6200S 2.03" type 5 removable SCSI 2 cd0(aha0:1:0): CD-ROM can't get the size npx0 on motherboard npx0: INT 16 interface My SCSI host is Adaptec AHA-1540CF, BIOS 2.11, firmware F.0. First thing, what I noticed right after installing CD-RW, is when system booting, at the time of hardware initialization of the SCSI host, the light on the front panel of CD-RW begans to blink by green and red colors what indicates hardware trouble as it written in manual. This blinking continues until first disk insertion, after that all seems Ok, I can mount inserted disk and read it. But when I do reading of large amount of data, e.g. tar cvf /dev/null /mnt/cdrom2/* then new failure appeared. After some time of reading process I see at the terminal messages like this: mnt/cdrom2/XF8633/X33set.tgz mnt/cdrom2/XF8633/X33SVGA.tgz mnt/cdrom2/XF8633/X33vfb.tgz tar: read error at byte 645632, reading 10240 bytes, in file /mnt/cdrom2/XF8633/ X33vfb.tgz : Input/output error mnt/cdrom2/XF8633/X33VG16.tgz tar: read error at byte 0, reading 6656 bytes, in file /mnt/cdrom2/XF8633/X33VG16.tgz : Input/output error at this time in the system log writtens messages like this: Aug 22 18:56:06 halfwasp /kernel: cd0(aha0:1:0): HARDWARE FAILURE info:0x14a asc:c2,95 Vendor Specific ASC Aug 22 18:56:06 halfwasp /kernel: cd0(aha0:1:0): HARDWARE FAILURE info:0x3d asc:c2,95 Vendor Specific ASC Aug 22 18:56:06 halfwasp /kernel: cd0(aha0:1:0): HARDWARE FAILURE info:0x43 asc:c2,95 Vendor Specific ASC after it drive became unaccessable until next mount. When i run cdrecord: cdrecord -checkdrive then I get: Cdrecord release 1.6 Copyright (C) 1995-1998 Jörg Schilling scsidev: '0,1,0' scsibus: 0 target: 1 lun: 0 cdrecord: Cannot do inquiry for CD-Recorder. cdrecord: Input/output error. test unit ready: scsi sendcmd: no error CDB: 00 00 00 00 00 00 status: 0x0 (GOOD STATUS) cmd finished after 0.001s timeout 40s cdrecord: The unit seems to be hung and needs power cycling. if there no disk in drive, or (if disk present in drive): Cdrecord release 1.6 Copyright (C) 1995-1998 Jörg Schilling scsidev: '0,1,0' scsibus: 0 target: 1 lun: 0 after that cdrecord completely frozen and blocks any access to all SCSI devices. Only reboot our exit to another world ;-) At the time of cdrecord access to drive in system log appeared four new messages: Aug 22 19:42:55 halfwasp /kernel: biodone: buffer already done That is all what I can tell right now. Only one what I can imagine is my RICOH is malfunctioned. Am I right? Any help would be appreciated. ------------------------------------------------------------------- Vladimir A. Petrov | I had slept and seen a dream, I seen a Windows aka vap | of the future, and it was almost working... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.980822184654.4232C-100000>