Date: Mon, 20 Sep 1999 01:00:42 +0000 (GMT) From: Adam Strohl <adams@digitalspark.net> To: Gary Hampton <garyh@mail.win.bright.net> Cc: current@FreeBSD.ORG Subject: Re: ata drivers Message-ID: <Pine.BSF.4.10.9909200100020.365-100000@nightfall.digitalspark.net> In-Reply-To: <Pine.BSF.4.10.9909192348370.2797-100000@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
Remake your acd device, I think you may need a patch to do it. I had the same problem, until I rm-ed the device and remade it. - ----( Adam Strohl )------------------------------------------------ - - UNIX Operations/Systems http://www.digitalspark.net - - adams (at) digitalspark.net xxx.xxx.xxxx xxxxx - - ----------------------------------------( DigitalSpark.NET )------- - On Sun, 19 Sep 1999, Gary Hampton wrote: > I have been trying to get the ata drivers to work on my system for a > a while now but can't seem to mount my cdrom drives. This is what I get on > boot up: > ata-pci0: <Intel PIIX4 IDE controller> at device 7.1 on pci0 > ata-pci0: Busmastering DMA supported > atapi: piomode=4, dmamode=2, udmamode=-1 > ata0: master: setting up WDMA2 mode on PIIX3/4 chip OK > atapi: DMA transfer mode set > acd0: <CRW6206A/1.3A> CDROM drive at ata0 as master > acd0: drive speed 1034KB/sec, 512KB cache, DMA > acd0: supported read types: CD-R, CD-RW, CD-DA, packet track > acd0: supported write types: CD-R, CD-RW, test write > acd0: Audio: play, 128 volume levels > acd0: Mechanism: ejectable tray > acd0: Medium: CD-ROM 120mm data disc loaded, unlocked, lock protected > atapi: piomode=3, dmamode=1, udmamode=-1 > atapi: PIO transfer mode set > acd1: < 8X_CD-ROM/ A01> CDROM drive at ata0 as slave > acd1: drive speed 1367KB/sec, 120KB cache > acd1: supported read types: CD-DA > acd1: Audio: play, 255 volume levels > acd1: Mechanism: ejectable tray > acd1: Medium: CD-ROM 120mm data disc loaded, unlocked > > Is there a trick I need to know to mount this? I have tride mounting > /dev/ almost every thing with "cd" in it but no luck the only drive I can > mount is /dev/cd0c my scsi cdrom. I was able to mount these drives with > the default atapi drivers but my system hung whe I tride to write to the > cd-rw drive. > > The easiest way to figure the cost of living is to take your income and > add ten percent. > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-current" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9909200100020.365-100000>