Date: Tue, 1 Jan 2002 00:45:13 +0000 (GMT) From: Gavin Atkinson <gavin@ury.york.ac.uk> To: <freebsd-mobile@freebsd.org> Subject: Laptop install woes Message-ID: <Pine.BSF.4.33.0201010036050.57531-100000@ury.york.ac.uk>
next in thread | raw e-mail | index | archive | help
Happy new year everyone! I have a laptop (P120 Kapok 6200) which I am trying to install 4.4-RELEASE onto without success. Windows is happy with the laptop. Below is the (hand-typed) boot messages from the 4.4-RELEASE install floppy, 5-CURRENT gives very similar output. The problem seems to be that FreeBSD is unble to allocate interrupts and/or IO space for much of the hardware, and so the hard drive and CD rom drive aren't recognised, amongst others. I have upgraded the BIOS which did not help, but gave me two more options, "Windows 98 compatibility mode" and "OS/2 compatibility mode". No combination of these (including neither and both) make any difference at all to the messages and result. A boot -v gives no indication at all of the problem. Where do I go from here? Thanks, Gavin (boot messages from 4.4-RELEASE install boot disk. The unknown PCI device is an MPEG accelerator.) npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <SiS 85c501> on motherboard pci0: <PCI bus> on pcib0 isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Generic PCI ATA controller> port 0x3f4-0x3f7, 0x374-0x377, 0x1f4-0x1f7, 0x174-0x177 at device 1.1 on pci1 atapci0: Busmastering DMA not supported ata3: at 0x374 on atapci0 ata3: unable to allocate interrupt device_probe_and_attach: ata3 attach returned 6 pci0: <Trident model 9660 VGA-compatible display device> at 6.0 pci0: <unknown card> (vendor=0x10b9, dev=0x3307) at 10.0 irq 11 pci_cfgintr: can't route an interrupt to 0:13 INTA pcic0: <Generic PCI-PCMCIA Bridge> port 0x3e0-0x3e3 irq0 at device 13.0 on pci0 ID is 0x84 ID is 0x84 pcic0: Polling mode pccard0: <PC card bus (classic)> on pcic0 pccard1: <PC card bus (classic)> on pcic0 pci_cfgintr: can't route an interrupt to 0:14 INTA pcic1: <Generic PCI-PCMCIA Bridge> port 0x3e4-0x3e7 irq0 at device 14.0 on pci0 ID is 0x84 ID is 0x84 pcic1: Polling mode pccard2: <PC card bus (classic)> on pcic1 pccard3: <PC card bus (classic)> on pcic1 pcib1: <SiS 85c601> on motherboard pci1: <PCI bus> on pcib0 orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0 fdc0: cannot reserve I/O port range ata0: at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1: at port 0x170-0x177,0x376 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: cannot reserve I/O port range pccard: card inserted, slot 2 ata0-master: ata_command: timeout waiting for intr ata0-master: identify failed ata1-master: ata_command: timeout waiting for intr ata1-master: identify failed To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.33.0201010036050.57531-100000>