Date: Tue, 14 Dec 1999 13:11:09 -0600 (CST) From: Thomas Veldhouse <veldy@visi.com> To: "Jeffrey J. Libman" <jeffrl@wantabe.com> Cc: freebsd-stable@FreeBSD.ORG Subject: Re: mountd and rpc.statd won't run Message-ID: <Pine.GSO.4.10.9912141305460.29964-100000@isis.visi.com> In-Reply-To: <Pine.BSF.4.21.9912141300050.15814-100000@cutter.wantabe.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I believe that ed0 is appropriate for ne2000. de0 is for "tulip" cards. It seems alot DEC (or Intel) support is included under tulip. Tom Veldhouse veldy@visi.com On Tue, 14 Dec 1999, Jeffrey J. Libman wrote: > i have an ed0 not de0 interface...could that be it? it is a realtek ne2000 > clone. i do not have auto in the interace list. > > mebbe i need to replace the realtek...i've read other things bad about it > as well. > > thanks. > > jeff > > -- > | > |\ +------------------------------+ > Jeffrey J. Libman, ops. mgr. | \ | Wantabe Internet Services | > Wantabe, Inc. |__\ +------------------------------+ > jeffrl@wantabe.com <-----|------> | access web cgi ftp news mail | > (281) 493-0718 __,.-=\'`^`'~=-../__,.-= +------------------------------+ > > On Tue, 14 Dec 1999, Thomas Veldhouse wrote: > > > I used to have this problem with the de0 interface. I posted about it > > here and I never recieved a single response. Something was indeed broken! > > However, I finally found that if I removed "auto" from the list of > > interfaces in rc.conf - everything worked as it was supposed to. > > > > I hope this solves you problem. As an FYI - the same problem existed in > > CURRENT. I have not tried it since on a newer build. > > > > Tom Veldhouse > > veldy@visi.com > > > > On Tue, 14 Dec 1999, Jeffrey J. Libman wrote: > > > > > i have 2 freeBSD systems, both running from an oct 11 cvsup and > > > build. both were running fine up until this weekend. then on one, i moved > > > a number of virtual web sites and ip's aliased to lo0 to it, and now > > > rpc.statd and mountd will not run. > > > > > > i don't know if the failure is related to the ip changes. > > > > > > rpc.statd hangs and won't run at boot time. > > > > > > the message i get from mountd is: > > > > > > mountd[pidno]: can't register mount > > > > > > when i try to run it without the -r (rpc) switch. > > > > > > any suggestions or ideas will be greatly appreciated. > > > > > > cheers, > > > jeff > > > > > > -- > > > | > > > |\ +------------------------------+ > > > Jeffrey J. Libman, ops. mgr. | \ | Wantabe Internet Services | > > > Wantabe, Inc. |__\ +------------------------------+ > > > jeffrl@wantabe.com <-----|------> | access web cgi ftp news mail | > > > (281) 493-0718 __,.-=\'`^`'~=-../__,.-= +------------------------------+ > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-stable" in the body of the message > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-stable" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.10.9912141305460.29964-100000>