Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 9 Jul 2003 03:44:26 -0400 (EDT)
From:      Alexey Koptsevich <kopts@astro.psu.edu>
To:        freebsd-questions@freebsd.org
Cc:        "J. Seth Henry" <jshamlet@comcast.net>
Subject:   Re: nutball video question
Message-ID:  <Pine.GSO.4.21.0307090318110.10681-100000@gnom.astro.psu.edu>
In-Reply-To: <E19Pb4i-000Cyc-1Q@claygirl.org>

next in thread | previous in thread | raw e-mail | index | archive | help

Hello,

I have got to the same idea today and -- what a luck -- this topic is
already dscussed on FreeBSD list! How fast should be the server to be able
to perform this task? For instance, would PII/400MHz/128Mb be enough? Do
different cards (meteor/bktr) consume CPU power differenly, or about the
same? What is the video resolution which consumes almost 100Mbps?

Is it possible to record video under FreeBSD? Which card should I buy for
that? Is multicasting can be done using combination of available software,
or some programming required?

Thanks,
Alex


On Mon, 9 Jun 2003, yussef wrote:

> If i understand what you want to do, i have something similar setup. i
> stuck my tv card [device bktr] in my headless server. Installed X on
> the server, along with xawtv and fxtv. i then ssh -X into the server
> from a client running X, i then execute the command for one of the tv
> viewing apps mentioned above, and it pops up on the client. It does
> such up most of the bandwidth on my 100base lan, but if you're talking
> small res and dont mind slightly low updates, its fine.
> my goal for this system was actually to turn the system into a bit of
> a pvr, having it record tv programs so i could watch at my own
> convenience.
> good luck
> 
> yussef
> 
> On Mon, 09 Jun 2003 23:59:11-0400(EDT)"J. Seth
> Henry"<jshamlet@comcast.net> wrote:
> 
> > Ok, I'm not sure if this will work (or if it does, how well), but I'm
> > curious to see what happens.
> > > I have one of the older Happauge WinTV boards (that is supported by
> > FreeBSD). Unfortunately, the only machine with an open PCI slot is my
> > headless server. I have a number of IBM netstations attached to this
> > server via a 100Mbps switched ethernet LAN. Currently, I am using KDE
> > as my desktop environment. I have no idea what the X server is, but I
> > do know KDE apps grumple a lot about the X server lacking features.
> > > Is it possible to stream video to these X terminals, even if it's not
> > "movie quality"? I'm thinking something along the lines of a security
> > camera setup, where it is OK if the video is the size of a business
> > card, and isn't updated terribly fast. That being said, could the same
> > stream be sent to two or more terminals simultaneously?
> > > The likely problems here are that the video transmission would be done
> > in X, which could result in bandwidth issues, and the little problem
> > of my monitor locking the video device.
> > > Alternately, and perhaps even better, is there a way to capture still
> > images from this board, for use as a "webcam"?
> > > FYR, this is strictly for experimentation purposes. :)
> > > Thanks,
> > Seth Henry
> > _______________________________________________
> > freebsd-questions@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > To unsubscribe, send any mail to
> > "freebsd-questions-unsubscribe@freebsd.org"
> > 
> 






Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.21.0307090318110.10681-100000>