Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 12 Nov 2004 21:05:34 +0300 (MSK)
From:      Susumu Tanabe <tanabe@mccme.ru>
To:        freebsd-questions@freebsd.org
Subject:   /etc/X11/XF86Config  
Message-ID:  <Pine.LNX.4.58.0411122103500.1996@pc3.mccme.ru>

next in thread | raw e-mail | index | archive | help

Hello,
I want to install XF86 on my notebook
Toshiba Satellite A60.
Whioch kind of configuration file is necessary?
The following trials gave no results.
                       yours, Susumu Tanabe

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%



Section "ServerLayout"
	Identifier     "XFree86 Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
        FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic/"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
	Load  "dbe"
	Load  "dri"
	Load  "extmod"
	Load  "glx"
	Load  "record"
	Load  "xtrap"
	Load  "speedo"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option "XkbLayout" "us,ru"
	Option "XkbOptions" "grp:lalt_toggle"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/sysmouse"
EndSection

Section "Monitor"
	#DisplaySize	  300   230	# mm
	Identifier   "Monitor0"
	VendorName   "HWP"
	ModelName    "b18"
	Option	    "DPMS"
	HorizSync	31.5-75.0
	VertRefresh	50-90
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        #Option     "ForcePCIMode"       	# [<bool>]
        #Option     "CCEPIOMode"         	# [<bool>]
        #Option     "CCENoSecurity"      	# [<bool>]
        #Option     "CCEusecTimeout"     	# <i>
        #Option     "AGPMode"            	# <i>
        #Option     "AGPSize"            	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "Display"            	# <str>
        #Option     "PanelWidth"         	# <i>
        #Option     "PanelHeight"        	# <i>
        #Option     "ProgramFPRegs"      	# [<bool>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "ShowCache"          	# [<bool>]
	Identifier  "Card0"
	Driver      "ati"
	VendorName  "ATI Technologies Inc"
	BoardName   "Rage 128 PF/PRO AGP 4x TMDS"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Depth     1
	EndSubSection
	SubSection "Display"
		Depth     4
	EndSubSection
	SubSection "Display"
		Depth     8
	EndSubSection
	SubSection "Display"
		Depth     15
	EndSubSection
	SubSection "Display"
		Depth     16
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes	"1024x768"
	EndSubSection
	DefaultDepth 24
EndSection

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	InputDevice    "DevInputMice" "AlwaysCore"
EndSection

Section "Files"
# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
EndSection

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option	    "XkbRules" "xfree86"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "PS/2"
	Option	    "Device" "/dev/psaux"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
	Identifier  "DevInputMice"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "no"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Toshiba"
	ModelName    "Satellite P25 Display"
	HorizSync    29.0 - 55.0
	VertRefresh  0.0 - 60.0
	Option	    "dpms"

	ModeLine "1400x900" 77 1400 1408 1416 1424 900 901 902 903
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "nvidia"
	VendorName  "NVIDIA"
	BoardName   "NVIDIA GeForce FX Go5200"
	VideoRam    32768
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1400x900"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection

# laps /etc/X11/XF86Config
# gets manually copied to ~jhs/public_html/hw/toshiba/s5100-603/XF86Config
# to rebuild use xf86cfg -textmode, then sellect vesa, then haand tune.
# Section		"InputDevice"
#	Identifier	"Mouse0"
#	Driver   	"mouse"
#	Option 		"Protocol"	"auto"
#	Option		"Device"	"/dev/sysmouse"
# EndSection

Section "ServerLayout"
	Identifier     "Layout0"
	Screen      0  "Screen0" 0 0
	InputDevice    "Keyboard0" "CoreKeyboard"
	InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"

	RgbPath		"/usr/X11R6/lib/X11/rgb"
	ModulePath	"/usr/X11R6/lib/modules"
	FontPath	"/usr/X11R6/lib/X11/fonts/misc/"
	FontPath	"/usr/X11R6/lib/X11/fonts/Speedo/"
	FontPath	"/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"

	# Load	"freetype"
	# Load	"xtt"
	Load  "extmod"
	Load  "glx"
	Load  "dri"
	Load  "dbe"
	Load  "record"
	Load  "xtrap"
	Load  "type1"
	Load  "speedo"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "Auto"
	Option	    "Device" "/dev/sysmouse"

# next 2 from gary
# for the scroll wheel - 4 and 5 are virtual buttons
     Option "Buttons" "5"
# button 4 = negative movements, button 5 = positive movements
     Option "ZAxisMapping" "4 5"

EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option	    "XkbModel" "pc101"
	Option	    "XkbLayout" "us"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Toshiba"
	ModelName    "S5100-603"
	HorizSync    31.5 - 108.0	# Toshiba User's Manual Chapter E
	VertRefresh  50.0 - 100.0	# Just a guess
        # manual quotes 15"
        #        x 2.54 = 381 mm
        #        Assume a 1024:768 ratio
        #        Use Pythagorus
        #               diag^2 = 1024^2 + 768^2
        #               diag^2 = 1024^2 + 768^2
        #               diag^2 = 1048576 + 589824
        #               diag^2 = 1638400
        #               diag = 1280
        #        Width  = 381 mm x 1024 / 1280 = 304.8
        #        Height = 381 mm x  768 / 1280 = 228.6
	DisplaySize	305 229

EndSection

Section "Device"

	# VendorName	"nVidia Corporation"	# xf86cfg visualmode
	# BoardName	"NV17 [GeForce4 440 Go]"	# xf86cfg visualmode
		# xf86cfg -textmode
	# xf86cfg -textmode
	# BusID    	"PCI:1:0:0"		# xf86cfg visualmode
	Identifier  "Card0"
	Driver      "nv"
	ChipSet     "GeForce4 440 Go"
	Card        "nv GeForce4 440 Go"
EndSection

Section "Screen"

# Toshiba User's Manual Chapter E:
#	15.0" TFT LCD will do 1024x768, 1400x1050, 1600x1200
#	extern monitor will do 2048 x 1536 @ 16M colours
	# DefaultDepth	16
			# xf86cfg -textmode
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.58.0411122103500.1996>