Date: Sun, 08 Nov 1998 12:21:53 +0100 (CET) From: Jeroen Ruigrok/Asmodai <asmodai@wxs.nl> To: FreeBSD Current <current@FreeBSD.ORG> Subject: ZIP, again Message-ID: <XFMail.981108122153.asmodai@wxs.nl>
next in thread | raw e-mail | index | archive | help
Well since the archives for current are dead, I am forced to ask again on the
list...
I have a ZIP+ Drive on my parallel port that I want to use... Last time I asked
I was using a SNAP 3.0 but I am now fully CURRENT (as far as can be) and am
giving it a shot again.
controller ppbus0
controller vpo0 at ppbus?
device nlpt0 at ppbus?
device ppi0 at ppbus?
controller ppc0 at isa? disable port ? tty irq 7
This is right afaik... Yet when I reboot I get this:
[chronias] asmodai $ dmesg
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #3: Sat Nov 7 20:56:15 CET 1998
asmodai@chronias.ninth-circle.org:/work/cvs/src/sys/compile/CHRONIAS
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (199.43-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x544 Stepping=4
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 100663296 (98304K bytes)
config> quit
avail memory = 95002624 (92776K bytes)
Probing for devices on PCI bus 0:
chip0: <Intel 82437VX PCI cache memory controller> rev 0x02 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 11 on pci0.17.0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
vga0: <Tseng Labs ET6000 graphics accelerator> rev 0x30 int a irq 9 on pci0.18.0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x02 int a irq 12 on
pci0.20.0
fxp0: Ethernet address 00:a0:c9:4d:2f:4f
Probing for PnP devices:
CSN 1 Vendor ID: CTL009c [0x9c008c0e] Serial 0x10046cf4 Comp ID: PNP0600
[0x0006d041]
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 5 drq 1 on isa
snd0: <SoundBlaster 16 4.16>
sbxvi0 at ? drq 5 on isa
snd0: <SoundBlaster 16 4.16>
sbmidi0 at 0x330 on isa
snd0: <SoundBlaster MPU-401>
awe0 at 0x620 on isa
AWE32: not detected
PC-Card Vadem 469 (5 mem & 2 I/O windows)
pcic: controller irq 7
Initializing PC-card drivers: sio
Intel Pentium F00F detected, installing workaround
Waiting 15 seconds for SCSI devices to settle
changing root device to da1s2a
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM FIREBALL ST6.4S 0F0C> Fixed Direct Access SCSI2 device
da1: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
da1: 6180MB (12657717 512 byte sectors: 255H 63S/T 787C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM FIREBALL_TM3200S 300X> Fixed Direct Access SCSI2 device
da0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
da0: 3067MB (6281856 512 byte sectors: 255H 63S/T 391C)
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <SONY CD-ROM CDU-415 1.1i> Removable CD-ROM SCSI2 device
cd0: 10.0MB/s transfers (10.0MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
(da1:ahc0:0:1:0): tagged openings now 8
fxp0: promiscuous mode enabled
Anyone have some ideas for me?
---
Jeroen Ruigrok van der Werven/Asmodai
asmodai(at)wxs.nl
Junior Network/Security Specialist
*BSD & picoBSD: The Power to Serve...
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.981108122153.asmodai>