Date: Fri, 30 Jun 2006 06:53:34 +0100 From: William <willay@gmail.com> To: "Antony Mawer" <fbsd-questions@mawer.org> Cc: freebsd-questions@freebsd.org, Ted Mittelstaedt <tedm@toybox.placo.com> Subject: Re: FreeBSD 6.0 compat with DL320 G4 Message-ID: <a24358fb0606292253h55590f33y9fe7828f1126d94e@mail.gmail.com> In-Reply-To: <44A4B603.1070403@mawer.org> References: <a24358fb0605050239y1550f5d1o6bc461b4d3cc9472@mail.gmail.com> <LOBBIFDAGNMAMLGJJCKNAEOHFDAA.tedm@toybox.placo.com> <a24358fb0606210116q3f019acdm40fb10224fd433b8@mail.gmail.com> <000a01c69699$665c1030$3c01a8c0@coolf89ea26645> <a24358fb0606230108r7e7a3fa3l4909cec6da8a2792@mail.gmail.com> <002701c6969e$7b4ed180$3c01a8c0@coolf89ea26645> <44A4B603.1070403@mawer.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks for the email Antony, I'm awaiting delivery of the server so I might have to order an intel card sharpish. What can I do the server+fbsd 6.x to prove the lock up? Regards, Will On 30/06/06, Antony Mawer <fbsd-questions@mawer.org> wrote: > On 23/06/2006 6:24 PM, Ted Mittelstaedt wrote: > > Out of the box the DL 320 G4 ships with a riser card that has 2 pci express > > slots. At least that is what they are supposed to be, we haven't tried > > them. > ... > > If you only do the pci express then the adapter you want is the Intel > > Pro 1000 PT either the single port or the dual port, and make sure > > it is the "server adapter" not the "desktop adapter" (the models carry > > the same model number but different descriptions, which is infuriating) > > We ended up in this same situation, and went down the Intel PCI express > NIC path (Intel Pro/1000PT). Be advised that, at this stage, the driver > in both 6.0 and 6.1 -RELEASE does not support this card, but support is > present in 7-CURRENT. > > That being said, with the official Intel driver (v6.0.5, not sure if > it's released yet), I was able to replace the standard em driver in 6.0, > build a new kernel, and bring the server up and survive some > pre-deployment load testing without any hiccups. > > Be aware that while the riser card has two PCI Express slots, one is > half-height, and the Intel NICs (at least the one we received) are a > full card. > > The onboard Broadcom NICs weren't worth the PCBs they were printed on in > terms of stability -- we were seeing the same hard lockups as Ted and > didn't have the luxury of time to spend fiddling with it!! From what I > gather from Ted's previous investigations, there's various work-arounds > in the Linux driver that work around some shortcomings in the hardware > itself... > > Regards > Antony >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?a24358fb0606292253h55590f33y9fe7828f1126d94e>