Date: Fri, 26 Oct 2007 11:39:23 +0200 From: "=?ISO-8859-1?Q?Kim_H=F8jgaard-Hansen?=" <kimrhh@gmail.com> To: freebsd-x11@freebsd.org Subject: xorg+i810+widescreen problems Message-ID: <db0889f40710260239l4d0fa98ep7563326a424ce849@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi I hope this is the right place to ask, tried on IRC without luck. I have an IBMX41 with Intel graphics i915, and an external widescreen TFT. = I have been strugling to make it work with the current xorg in ports, and FreeBSD-6.2. It have had working on FreeBSD-7.0, but decided to switch to stable since I don't have the time for -current :) so, following the handbook I have used i915resolution to patch in the right modes: /etc/rc.conf ------------------- i915resolution_enable=3D"YES" i915resolution_width=3D"1680" i915resolution_height=3D"1050" ---------------- 915resolution starts with the pc, verified by output and setting up the modeline in xorg.conf found in /var/log/Xorg.0.log /etc/X11/xorg.conf ------------------ Section "Monitor" Identifier "Monitor0" VendorName "HWP" ModelName "hpw2207" #(II) I810(0): Supported additional Video Mode: #(II) I810(0): clock: 146.2 MHz Image Size: 473 x 296 mm #(II) I810(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0 #(II) I810(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0 ModeLine "1680x1050" 146.2 1680 1784 1960 2240 1050 1053 105= 9 1089 # HorizSync 24-82 # VertRefresh 48-76 Option "DPMS" EndSection note: I also tried with the sync rates commented in, doesn't help Section "Device" Identifier "Card0" Driver "i810" VendorName "Intel Corporation" BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 24 Modes "1680x1050" "1280x1024" "1024x768" EndSubSection EndSection ----------------- I have also put the agp module i loader.conf, but I think it is already compiled into the GENERIC kernel? dmesg | grep 'agp' ------------------- agp0: <Intel 82915GM (915GM GMCH) SVGA controller> port 0x1800-0x1807 mem 0xa0080000-0xa00fffff,0xc0000000-0xcfffffff,0xa0000000-0xa003ffff irq 16 at device 2.0 on pci0 agp0: detected 7932k stolen memory agp0: aperture size is 256M drmsub0: <Intel i915GM>: (child of agp_i810.c) on agp0 So, how can I debug this problem further? best regards Kim H=F8jgaard-Hansen
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?db0889f40710260239l4d0fa98ep7563326a424ce849>