Date: Mon, 11 Jan 1999 11:00:37 -0500 (EST) From: tom@tomqnx.com (Tom Torrance at home) To: current@FreeBSD.ORG Subject: CAM SA Problem Message-ID: <m0zzjle-000I0NC@TomQNX.tomqnx.com>
next in thread | raw e-mail | index | archive | help
--ELM916070437-11740-0_
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sometime within the past 2-3 weeks something went into the CAM code
that prevents ANY tape access. It used to work with warning
messages at open and close.
This is using an ASUS 875 controller to access an HP-T4000s drive.
This drive uses a density setting of 0x45 with fixed blocks of
512 (compressed output).
The attachment is dmesg with 'camcontrol debug -c 0:6' for 'mt status'.
The system is current as of this AM.
Please help/advise me!
Thank you in advance!!
Regards,
Tom
--ELM916070437-11740-0_
Content-Type: text/plain; charset=ISO-8859-1
Content-Disposition: attachment; filename=dmesg
Content-Description: SCSI debug of 'mt status' command.
Content-Transfer-Encoding: 7bit
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #38: Mon Jan 11 10:35:06 EST 1999
tom@darkstar.tomqnx.com:/usr/src/sys/compile/DARKSTAR
Calibrating clock(s) ... TSC clock: 200453223 Hz, i8254 clock: 1193175 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 200453223 Hz
CPU: Pentium/P55C (200.45-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x544 Stepping=4
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (65536K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x002af000 - 0x03ff5fff, 64253952 bytes (15687 pages)
config> pnp 1 0 enable os port0 0x220 port1 0x300 port2 0x388 irq0 10 drq0 3 drq1 5
config> pnp 1 1 enable os port0 0x200
config> pnp 1 2 enable os port0 0x620 port1 0xa20 port2 0xe20
config>
config> quit
avail memory = 62480384 (61016K bytes)
Found BIOS32 Service Directory header at 0xf00f9a20
Entry = 0xf04e0 (0xf00f04e0) Rev = 0 Len = 1
PCI BIOS entry at 0x510
DMI header at 0xf00f52a0
Version 2.0
Table at 0xf52ba, 33 entries, 1044 bytes
Other BIOS signatures found:
ACPI: 00000000
$PnP: 000fcf10
Preloaded elf kernel "kernel" at 0xf029e000.
Preloaded userconfig_script "/boot/pnp.config" at 0xf029e09c.
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71008086)
Probing for devices on PCI bus 0:
found-> vendor=0x8086, dev=0x7100, revid=0x01
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
chip0: <Intel 82439TX System Controller (MTXC)> rev 0x01 on pci0.0.0
found-> vendor=0x8086, dev=0x7110, revid=0x01
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.1.0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[0]: type 4, range 32, base 0000e000, size 4
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.1.1
intel_piix_status: primary master/slave sample = 3, master/slave recovery = 1
intel_piix_status: primary master fastDMAonly disabled, pre/post enabled,
intel_piix_status: IORDY sampling enabled,
intel_piix_status: fast PIO enabled
intel_piix_status: primary master/slave sample = 3, master/slave recovery = 1
intel_piix_status: primary slave fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
ide_pci: busmaster 0 status: 24 from port: 0000e002
ide_pci: ide0:0 has been configured for DMA by BIOS
intel_piix_status: secondary master/slave sample = 5, master/slave recovery = 4
intel_piix_status: secondary master fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
intel_piix_status: secondary master/slave sample = 5, master/slave recovery = 4
intel_piix_status: secondary slave fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
ide_pci: busmaster 1 status: 04 from port: 0000e00a
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=3
map[0]: type 4, range 32, base 0000d800, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x01
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
chip2: <Intel 82371AB Power management controller> rev 0x01 on pci0.1.3
found-> vendor=0x1000, dev=0x000f, revid=0x03
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[0]: type 4, range 32, base 0000d400, size 8
map[1]: type 1, range 32, base e7000000, size 8
map[2]: type 1, range 32, base e6800000, size 12
ncr0: <ncr 53c875 fast20 wide scsi> rev 0x03 int a irq 9 on pci0.10.0
ncr0: minsync=12, maxsync=137, maxoffs=16, 128 dwords burst, large dma fifo
ncr0: single-ended, open drain IRQ driver, using on-chip SRAM
found-> vendor=0x5333, dev=0x8a01, revid=0x01
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[0]: type 1, range 32, base e0000000, size 26
vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a irq 11 on pci0.11.0
Probing for PnP devices:
Trying Read_Port at 203
Trying Read_Port at 243
PnP: CSN 1 COMP_DEVICE_ID = 0x2fb0d041
CSN 1 Vendor ID: CTL00c1 [0xc1008c0e] Serial 0x1641e094 Comp ID: PNPb02f [0x2fb0d041]
PnP: override config for CSN 1 LDN 0 vend_id 0xc1008c0e
port 0x0220 0x0300 0x0388 0x0000 irq 10:0 drq 3:5 en 1
PnP: override config for CSN 1 LDN 1 vend_id 0xc1008c0e
port 0x0200 0x0000 0x0000 0x0000 irq 0:0 drq 4:4 en 1
PnP: override config for CSN 1 LDN 2 vend_id 0xc1008c0e
port 0x0620 0x0000 0x0000 0x0000 irq 0:0 drq 4:4 en 1
Called nullpnp_probe with tag 0x00000001, type 0xc1008c0e
Called nullpnp_probe with tag 0x00000001, type 0x2fb0d041
Probing for devices on the ISA bus:
sc0 on isa
sc0: fb0 kbd0
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x10000, flags:0x3d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status b1 03 c8
psm: status b1 03 c8
psm: status b1 03 c8
psm: status 00 00 3c
psm: data 08 00 00
psm: data 08 00 00
psm: status 00 02 64
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
bpf: lp0 attached
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <QUANTUM FIREBALL ST4.3A>
wd0: 4110MB (8418816 sectors), 14848 cyls, 9 heads, 63 S/T, 512 B/S
wd0: ATA INQUIRE valid = 0007, dmamword = 0007, apio = 0003, udma = 0407
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <TOSHIBA CD-ROM XM-5302TA/1095>, removable, intr, iordy
acd0: drive speed 689KB/sec, 256KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm audio disc loaded, unlocked
1 3C5x9 board(s) on ISA found at 0x210
ep0 at 0x210-0x21f irq 5 on isa
ep0: aui/bnc[*BNC*] address 00:60:8c:62:a5:65
bpf: ep0 attached
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xf00b8000 size:32k gran:32k, buf:0x0 size:0k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
npx0 on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 175284837 bytes/sec
bzero() bandwidth = 88409512 bytes/sec
joy0 at 0x201 on isa
joy0: joystick
imasks: bio c008c040, tty c00710b2, net c00710b2
BIOS Geometries:
0:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
1:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
2:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
3:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
4:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
5:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
6:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
7:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
0 accounted for
Device configuration finished.
Intel Pentium detected, installing workaround for F00F bug
bpf: tun0 attached
bpf: sl0 attached
bpf: ppp0 attached
new masks: bio c008c040, tty c00710b2, net c00710b2
bpf: lo0 attached
Linux-ELF exec handler installed
Waiting 15 seconds for SCSI devices to settle
ncr0: restart (scsi reset).
(probe5:ncr0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe5:ncr0:0:5:0): ILLEGAL REQUEST asc:24,0
(probe5:ncr0:0:5:0): Invalid field in CDB sks:c0,1
(probe6:ncr0:0:6:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe6:ncr0:0:6:0): ILLEGAL REQUEST asc:24,0
(probe6:ncr0:0:6:0): Invalid field in CDB
sa0 at ncr0 bus 0 target 6 lun 0
sa0: <HP T4000s 1.10> Removable Sequential Access SCSI-2 device
sa0: 3.300MB/s transfers
pass0 at ncr0 bus 0 target 0 lun 0
pass0: <SEAGATE ST34555N 0930> Fixed Direct Access SCSI-2 device
pass0: Serial Number JKA5580002KB3M
pass0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
pass1 at ncr0 bus 0 target 5 lun 0
pass1: <HP CD-Writer 6020 1.07> Removable CD-ROM SCSI-2 device
pass1: 3.300MB/s transfers
pass2 at ncr0 bus 0 target 6 lun 0
pass2: <HP T4000s 1.10> Removable Sequential Access SCSI-2 device
pass2: 3.300MB/s transfers
da0 at ncr0 bus 0 target 0 lun 0
da0: <SEAGATE ST34555N 0930> Fixed Direct Access SCSI-2 device
da0: Serial Number JKA5580002KB3M
da0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C)
cd0 at ncr0 bus 0 target 5 lun 0
cd0: <HP CD-Writer 6020 1.07> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: cd present [176780 x 2048 byte records]
Considering MFS root f/s.
No MFS image available as root f/s.
Considering FFS root f/s.
changing root device to da0s2a
da0s1: type 0x6, start 63, end = 1025891, size 1025829 : OK
da0s2: type 0xa5, start 1025892, end = 8885267, size 7859376 : OK
wd0s1: type 0xb, start 63, end = 6152894, size 6152832 : OK
wd0s2: type 0x82, start 6152895, end = 8353799, size 2200905 : OK
ffs_mountfs: superblock updated for soft updates
OSS/FreeBSD loading, address = f08ddd58
(xpt0:ncr0:0:6:X): debugging flags now 8
(sa0:ncr0:0:6:0): RESERVE(06). CDB: 16 0 0 0 0 0
(sa0:ncr0:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(sa0:ncr0:0:6:0): READ BLOCK LIMITS. CDB: 5 0 0 0 0 0
(sa0:ncr0:0:6:0): MODE SENSE(06). CDB: 1a 0 f 0 1c 0
(sa0:ncr0:0:6:0): MODE SENSE(06). CDB: 1a 0 f 0 1c 0
(sa0:ncr0:0:6:0): ILLEGAL REQUEST asc:24,0
(sa0:ncr0:0:6:0): Invalid field in CDB
(sa0:ncr0:0:6:0): MODE SENSE(06). CDB: 1a 0 0 0 c 0
(sa0:ncr0:0:6:0): MODE SENSE(06). CDB: 1a 0 0 0 c 0
(sa0:ncr0:0:6:0): MODE SELECT(06). CDB: 15 0 0 0 c 0
(sa0:ncr0:0:6:0): MODE SELECT(06). CDB: 15 0 0 0 c 0
(sa0:ncr0:0:6:0): ILLEGAL REQUEST asc:26,0
(sa0:ncr0:0:6:0): Invalid field in parameter list
(sa0:ncr0:0:6:0): MODE SELECT(06). CDB: 15 0 0 0 c 0
(sa0:ncr0:0:6:0): unable to set variable blocksize
--ELM916070437-11740-0_--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m0zzjle-000I0NC>