Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 16 Mar 2013 00:17:18 +0100
From:      "Michael Ross" <gmx@ross.cx>
To:        "Peter Harrison" <four.harrisons@googlemail.com>
Cc:        questions@freebsd.org
Subject:   Re: No sound with Thinkpad X60
Message-ID:  <op.wt0ga4rxg7njmm@michael-think>
In-Reply-To: <20130315232827.GA2189@thinkpad.piggybox>
References:  <20130314225908.GA2157@thinkpad.piggybox> <op.wtz02ybcg7njmm@michael-think> <20130315232827.GA2189@thinkpad.piggybox>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 16 Mar 2013 00:28:27 +0100, Peter Harrison  
<four.harrisons@googlemail.com> wrote:

> Friday, 15 March 2013 at 18:48:24 +0100, Michael Ross said:
>> On Thu, 14 Mar 2013 23:59:09 +0100, Peter Harrison
>> <four.harrisons@googlemail.com> wrote:
>>
>> > Hi list,
>> >
>> > I've a problem with sound on a Thinkpad X60, which has an Intel HDA  
>> chip.
>> >
>> > This is what I see in dmesg:
>> >
>> > hdac0: <Intel 82801G HDA Controller> mem 0xee240000-0xee243fff irq 17  
>> at
>> > device 27.0 on pci0
>> > hdacc0: <Analog Devices AD1981HD HDA CODEC> at cad 0 on hdac0
>> > hdaa0: <Analog Devices AD1981HD Audio Function Group> at nid 1 on  
>> hdacc0
>> > pcm0: <Analog Devices AD1981HD (Analog)> at nid 5 and 25,8 on hdaa0
>> > hdacc1: <Conexant (0x2bfa) HDA CODEC> at cad 1 on hdac0
>> > unknown: <Conexant (0x2bfa) HDA CODEC Modem Function Group> at nid 2  
>> on
>> > hdacc1 (no driver attached)
>> >
>> > and from sndstat:
>> >
>> > FreeBSD Audio Driver (newpcm: 32bit 2009061500/i386)
>> > Installed devices:
>> > pcm0: <Analog Devices AD1981HD (Analog)> (play/rec) default
>> >
>> > and from mixer:
>> >
>> > Mixer vol      is currently set to 100:100
>> > Mixer pcm      is currently set to 100:100
>> > Mixer speaker  is currently set to 100:100
>> > Mixer cd       is currently set to   1:1
>> > Mixer rec      is currently set to   1:1
>> > Mixer igain    is currently set to  42:42
>> > Mixer ogain    is currently set to 100:100
>> > Mixer monitor  is currently set to  67:67
>> > Recording source: cd
>> >
>> > But I have no sound. This is using Gnome 2.32 on 9.1-R. I did  
>> initially
>> > accidentally install Pulseaudio, but have subsequently deleted it and
>> > reinstalled everything that depended on it without the Pulseaudio
>> > dependency.
>> >
>> > Any thoughts on what I'm doing wrong?
>> >
>> > Thanks in advance.
>>
>> Possibly not helping a lot:
>>
>> I have a T510 thinkpad with Intel HDA audio, running Windows 7.
>> I need to have the audio driver *and* the modem driver installed for any
>> sound to work.
>> So possibly the modem part has to be initialised or something.
>> You have "no driver attached" on your modem, so maybe that's worth  
>> looking
>> at.
>>
>> You could also try if sound works from a terminal without running Gnome  
>> at
>> all,
>> just to be sure it's not some Gnome configuration thing.
>>
>> Regards,
>>
>> Michael
>
> Thanks Michael.
>
> Tried turning gnome off. Still no sound from the console. Is there a  
> FreeBSD kernel module for the modem?
>

Don't know.
But stepping back, do you have snd_hda loaded?
( Silly me, should have been the first question. )

Found this:
http://www.bmichelsen.no/blog/2012/01/28/configuring-freebsd-for-x60s/

Regards,

Michael



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?op.wt0ga4rxg7njmm>