Date: Fri, 1 May 2020 11:39:05 +0200 From: Morten Bo Johansen <listmail@mbjnet.dk> To: freebsd-questions@freebsd.org Subject: Mounting SD-card in my camera Message-ID: <slrnranrhp.1aa.listmail@asmtp.unoeuro.com>
next in thread | raw e-mail | index | archive | help
Hi
I am still rather new to FreeBDS so please bear with me ...but
I have a problem mounting the file system on the SD-card of my
camera via the USB cable . I am sure it must be a vfat file
system. When I plug in the cable and turn on the camera, a
/dev/da0 device node is created and dmesg shows:
ugen2.2: <Panasonic DMC-FZ200> at usbus2
umass0 on uhub5
umass0: <Panasonic DMC-FZ200, class 0/0, rev 2.00/1.00, addr 2>
on usbus2
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:3:0: Attached to scbus3
pass2 at umass-sim0 bus 0 scbus3 target 0 lun 0
pass2: <MATSHITA DMC-FZ200 0100> Removable Direct Access SPC-3
SCSI device
pass2: Serial Number 000000000000000000GX1R07230881
pass2: 40.000MB/s transfers
GEOM: new disk da0
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <MATSHITA DMC-FZ200 0100> Removable Direct Access SPC-3
SCSI device
da0: Serial Number 000000000000000000GX1R07230881
da0: 40.000MB/s transfers
da0: 15298671411200MB (535734837315633153 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
da0: Delete methods: <NONE(*),ZERO>
da0: Write Protected
However, the output from
blkid /dev/da0
shows nothing (running it with sudo makes no difference)
The output from sudo camcontrol devlist:
<MATSHITA DVD/CDRW UJDA780 CB01> at scbus0 target 0 lun 0 (cd0,pass0)
<CT240BX500SSD1 M6CR013> at scbus1 target 0 lun 0 (pass1,ada0)
<MATSHITA DMC-FZ200 0100> at scbus3 target 0 lun 0 (da0,pass2)
My camera is listed in the last line
I have installed all the fusefs modules, automountd is running.
I have enabled automount and autofs in rc.conf. I have
vfs.usermount=1 in sysctl.conf
I can access my usb backup disk, which has an ext4 file system
on it and mount it with lklfuse. I notice that when I plug in
my backup disk a subnode /dev/da0s1 is created and I use that
node to access the backup disk,. This node is not created when
I plug in my camera.
I simply cannot contact the camera at all. Anyone who could
help me?
Thanks,
Morten
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?slrnranrhp.1aa.listmail>