Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 03 Dec 2016 14:23:13 +0100
From:      Michael Sperber <sperber@deinprogramm.de>
To:        Mark Millard <markmi@dsl-only.net>
Cc:        freebsd-arm@freebsd.org
Subject:   Re: Can't get 11.0-RELEASE to boot on Banana PI M3
Message-ID:  <y9loa0t87um.fsf@jellaby.local>
In-Reply-To: <1E9515A0-06D5-4CF9-9D29-D6FF591686F4@dsl-only.net> (Mark Millard's message of "Fri, 2 Dec 2016 15:35:50 -0800")
References:  <y9l7f7t2smo.fsf@jellaby.local> <20161124222152.dfd02dcafdc25182b6b46e50@bidouilliste.com> <66508AA3-436A-4D9E-AAB5-B85D0B4FC40C@dsl-only.net> <y9leg1w11yy.fsf@jellaby.local> <A218DF6A-4EFA-4EB7-99EC-8DA2E077DE3F@dsl-only.net> <y9lzikfbl8x.fsf@jellaby.local> <9C8B313C-A058-44DF-8673-D23B481CE312@dsl-only.net> <y9loa0ua6ge.fsf@jellaby.local> <1E9515A0-06D5-4CF9-9D29-D6FF591686F4@dsl-only.net>

next in thread | previous in thread | raw e-mail | index | archive | help

Mark Millard <markmi@dsl-only.net> writes:

> /dev/da0 is not the same as /dev/mmcsd0 . /dev/da0 is the
> interface to the SATA port. That hardware is accessed over
> USB on the BPi-M3.

Ah, now I understand.  Sorry for my being stupid about this!

I finally noticed this:

eval: cannot open /etc/fstab: No such file or directory

And indeed /etc/fstab is not there - creating one fixed that problem.
(Shouldn't Crochet have created one?)  So that leaves the Ethernet
problem.  I get this:

awg0: <Allwinner Gigabit Ethernet> mem 0x1c30000-0x1c300ff on simplebus0
awg0: soft reset timed out
device_attach: awg0 attach returned 60

Any ideas on that one?  Broken hardware?  I see the awg driver is fairly
new - is 11.0-RELEASE recent enough?

-- 
Regards,
Mike



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?y9loa0t87um.fsf>