Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 21 Feb 2005 01:55:39 +0300
From:      Mike Okun <okun@ariadnamedia.ru>
To:        freebsd-scsi@freebsd.org
Subject:   AIC-7902 ws Seagete drive problem
Message-ID:  <213762780.20050221015539@amdhost.info>

next in thread | raw e-mail | index | archive | help
Hello,

I have got the Supermicro X6DHP-8G (E7520) based server with onboard
Adaptec AIC7902 SCSI controller and trying to install FreeBSD 5.3 on
it. Into channel A two Seagete drives (ST336607LC and ST373307LC) are
plugged.

Installation CD boots only in safe mode, SCB timout errors appears
from time to time and also reflected in dmesg.

Is there the issue with ahd driver or it is the issue with Seagete
disks or settings?

dmesg output:

 kernel boot file is /boot/kernel/kernel
 mfdev=1
 cmdreg=0x0106, statreg=0x0090, cachelnsz=0 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 pcib0: matched entry for 0.2.INTA
 pcib0: slot 2 INTA hardwired to IRQ 16
 found->        vendor=0x8086, dev=0x3595, revid=0x0c
 bus=0, slot=2, func=0
 class=06-04-00, hdrtype=0x01, mfdev=0
 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
 intpin=a, irq=16
 pcib0: matched entry for 0.4.INTA
 pcib0: slot 4 INTA hardwired to IRQ 16
 found->        vendor=0x8086, dev=0x3597, revid=0x0c
 bus=0, slot=4, func=0
 class=06-04-00, hdrtype=0x01, mfdev=0
 cmdreg=0x0107, statreg=0x4018, cachelnsz=8 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
 intpin=a, irq=16
 pcib0: matched entry for 0.6.INTA
 pcib0: slot 6 INTA hardwired to IRQ 16
 found->        vendor=0x8086, dev=0x3599, revid=0x0c
 bus=0, slot=6, func=0
 class=06-04-00, hdrtype=0x01, mfdev=0
 cmdreg=0x0107, statreg=0x4018, cachelnsz=8 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
 intpin=a, irq=16
 map[20]: type 4, range 32, base 00001400, size  5, enabled
 pcib0: matched entry for 0.29.INTA
 pcib0: slot 29 INTA hardwired to IRQ 16
 found->        vendor=0x8086, dev=0x24d2, revid=0x02
 bus=0, slot=29, func=0
 class=0c-03-00, hdrtype=0x00, mfdev=1
 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 intpin=a, irq=16
 map[20]: type 4, range 32, base 00001420, size  5, enabled
 pcib0: matched entry for 0.29.INTB
 pcib0: slot 29 INTB hardwired to IRQ 19
 found->        vendor=0x8086, dev=0x24d4, revid=0x02
 bus=0, slot=29, func=1
 class=0c-03-00, hdrtype=0x00, mfdev=0
 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 intpin=b, irq=19
 map[20]: type 4, range 32, base 00001440, size  5, enabled
 pcib0: matched entry for 0.29.INTC
 pcib0: slot 29 INTC hardwired to IRQ 18
 found->        vendor=0x8086, dev=0x24d7, revid=0x02
 bus=0, slot=29, func=2
 class=0c-03-00, hdrtype=0x00, mfdev=0
 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 intpin=c, irq=18
 map[20]: type 4, range 32, base 00001460, size  5, enabled
 pcib0: matched entry for 0.29.INTA
 pcib0: slot 29 INTA hardwired to IRQ 16
 found->        vendor=0x8086, dev=0x24de, revid=0x02
 bus=0, slot=29, func=3
 class=0c-03-00, hdrtype=0x00, mfdev=0
 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 intpin=a, irq=16
 map[10]: type 1, range 32, base dd000000, size 10, enabled
 pcib0: matched entry for 0.29.INTD
 pcib0: slot 29 INTD hardwired to IRQ 23
 found->        vendor=0x8086, dev=0x24dd, revid=0x02
 bus=0, slot=29, func=7
 class=0c-03-20, hdrtype=0x00, mfdev=0
 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 intpin=d, irq=23
 powerspec 2  supports D0 D3  current D0
 found->        vendor=0x8086, dev=0x244e, revid=0xc2
 bus=0, slot=30, func=0
 class=06-04-00, hdrtype=0x01, mfdev=0
 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
 found->        vendor=0x8086, dev=0x24d0, revid=0x02
 bus=0, slot=31, func=0
 class=06-01-00, hdrtype=0x00, mfdev=1
 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 map[20]: type 4, range 32, base 000014a0, size  4, enabled
 found->        vendor=0x8086, dev=0x24db, revid=0x02
 bus=0, slot=31, func=1
 class=01-01-8a, hdrtype=0x00, mfdev=0
 cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 intpin=a, irq=255
 map[20]: type 4, range 32, base 00001100, size  5, enabled
 pcib0: matched entry for 0.31.INTB
 pcib0: slot 31 INTB hardwired to IRQ 17
 found->        vendor=0x8086, dev=0x24d3, revid=0x02
 bus=0, slot=31, func=3
 class=0c-05-00, hdrtype=0x00, mfdev=0
 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 intpin=b, irq=17
 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
 pcib1:   secondary bus     1
 pcib1:   subordinate bus   3
 pcib1:   I/O decode        0x2000-0x3fff
 pcib1:   memory decode     0xdd100000-0xdd3fffff
 pcib1:   prefetched decode 0xfff00000-0xfffff
 pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.PEX0 - AE_NOT_FOUND
 pci1: <ACPI PCI bus> on pcib1
 pci1: physical bus=1
 found->        vendor=0x8086, dev=0x0329, revid=0x09
 bus=1, slot=0, func=0
 class=06-04-00, hdrtype=0x01, mfdev=1
 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
 map[10]: type 1, range 32, base dd100000, size 12, enabled
 pcib1: device (null) requested decoded memory range 0xdd100000-0xdd100fff
 found->        vendor=0x8086, dev=0x0326, revid=0x09
 bus=1, slot=0, func=1
 class=08-00-20, hdrtype=0x00, mfdev=1
 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 powerspec 2  supports D0 D3  current D0
 found->        vendor=0x8086, dev=0x032a, revid=0x09
 bus=1, slot=0, func=2
 class=06-04-00, hdrtype=0x01, mfdev=1
 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
 map[10]: type 1, range 32, base dd101000, size 12, enabled
 pcib1: device (null) requested decoded memory range 0xdd101000-0xdd101fff
 found->        vendor=0x8086, dev=0x0327, revid=0x09
 bus=1, slot=0, func=3
 class=08-00-20, hdrtype=0x00, mfdev=1
 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
 lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 powerspec 2  supports D0 D3  current D0
 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
 pcib2:   secondary bus     2
 pcib2:   subordinate bus   2
 pcib2:   I/O decode        0x2000-0x2fff
 pcib2:   memory decode     0xdd200000-0xdd2fffff
 pcib2:   prefetched decode 0xfff00000-0xfffff
 ACPI PCI link initial configuration:
 pci2: <ACPI PCI bus> on pcib2
 pci2: physical bus=2
 map[10]: type 4, range 32, base 00002400, size  8, enabled
 pcib2: device (null) requested decoded I/O range 0x2400-0x24ff
 pcib1: device (null) requested decoded I/O range 0x2400-0x24ff
 map[14]: type 1, range 64, base dd200000, size 13, enabled
 pcib2: device (null) requested decoded memory range 0xdd200000-0xdd201fff
 pcib1: device (null) requested decoded memory range 0xdd200000-0xdd201fff
 map[1c]: type 4, range 32, base 00002000, size  8, enabled
 pcib2: device (null) requested decoded I/O range 0x2000-0x20ff
 pcib1: device (null) requested decoded I/O range 0x2000-0x20ff
 pcib2: matched entry for 2.2.INTA
 pcib2: slot 2 INTA hardwired to IRQ 32
 found->        vendor=0x9005, dev=0x801d, revid=0x10
 bus=2, slot=2, func=0
 class=01-00-00, hdrtype=0x00, mfdev=1
 cmdreg=0x0117, statreg=0x0430, cachelnsz=8 (dwords)
 lattimer=0x40 (1920 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
 intpin=a, irq=32
 powerspec 2  supports D0 D3  current D0
 MSI supports 2 messages, 64 bit
 map[10]: type 4, range 32, base 00002c00, size  8, enabled
 pcib2: device (null) requested decoded I/O range 0x2c00-0x2cff
 pcib1: device (null) requested decoded I/O range 0x2c00-0x2cff
 map[14]: type 1, range 64, base dd202000, size 13, enabled
 pcib2: device (null) requested decoded memory range 0xdd202000-0xdd203fff
 pcib1: device (null) requested decoded memory range 0xdd202000-0xdd203fff
 map[1c]: type 4, range 32, base 00002800, size  8, enabled
 pcib2: device (null) requested decoded I/O range 0x2800-0x28ff
 pcib1: device (null) requested decoded I/O range 0x2800-0x28ff
 pcib2: matched entry for 2.2.INTB
 pcib2: slot 2 INTB hardwired to IRQ 33
 found->        vendor=0x9005, dev=0x801d, revid=0x10
 bus=2, slot=2, func=1
 class=01-00-00, hdrtype=0x00, mfdev=1
 cmdreg=0x0117, statreg=0x0430, cachelnsz=8 (dwords)
 lattimer=0x40 (1920 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
 intpin=b, irq=33
 powerspec 2  supports D0 D3  current D0
 MSI supports 2 messages, 64 bit
 ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x2000-0x20ff,0x2400-0x24ff mem 0xdd200000-0xdd201fff irq 32 at device 2.0 on pci2
 ahd0: Defaulting to MEMIO on
 ahd0: Reserved 0x2000 bytes for rid 0x14 type 3 at 0xdd200000
 ahd0: Reading VPD from SEEPROM...ahd0: VPD parsing successful
 ahd0: Reading SEEPROM...done.
 ahd0: STPWLEVEL is on
 ahd0: Manual Primary Termination
 ahd0: Manual Secondary Termination
 ahd0: Primary High byte termination Enabled
 ahd0: Primary Low byte termination Enabled
 ahd0: Secondary High byte termination Disabled
 ahd0: Secondary Low byte termination Disabled
 ahd0: Downloading Sequencer Program... 696 instructions downloaded
 ahd0: Features 0x3c101, Bugs 0x740002, Flags 0x43f1
 ahd0: [GIANT-LOCKED]
 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
 ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x2800-0x28ff,0x2c00-0x2cff mem 0xdd202000-0xdd203fff irq 33 at device 2.1 on pci2
 ahd1: Defaulting to MEMIO on
 ahd1: Reserved 0x2000 bytes for rid 0x14 type 3 at 0xdd202000
 ahd1: Reading VPD from SEEPROM...ahd1: VPD parsing successful
 ahd1: Reading SEEPROM...done.
 ahd1: STPWLEVEL is on
 ahd1: Manual Primary Termination
 ahd1: Manual Secondary Termination
 ahd1: Primary High byte termination Enabled
 ahd1: Primary Low byte termination Enabled
 ahd1: Secondary High byte termination Disabled
 ahd1: Secondary Low byte termination Disabled
 ahd1: Downloading Sequencer Program... 696 instructions downloaded
 ahd1: Features 0x3c101, Bugs 0x740002, Flags 0x43f0
 ahd1: [GIANT-LOCKED]
 aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
 pci1: <base peripheral, interrupt controller> at device 0.1 (no driver attached)
 pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
 pcib3:   secondary bus     3
 pcib3:   subordinate bus   3
 pcib3:   I/O decode        0x3000-0x3fff
 pcib3:   memory decode     0xdd300000-0xdd3fffff
 pcib3:   prefetched decode 0xfff00000-0xfffff
 ACPI PCI link initial configuration:
 pci3: <ACPI PCI bus> on pcib3
 pci3: physical bus=3
 map[10]: type 1, range 64, base dd300000, size 17, enabled
 pcib3: device (null) requested decoded memory range 0xdd300000-0xdd31ffff
 pcib1: device (null) requested decoded memory range 0xdd300000-0xdd31ffff
 map[20]: type 4, range 32, base 00003000, size  6, enabled
 pcib3: device (null) requested decoded I/O range 0x3000-0x303f
 pcib1: device (null) requested decoded I/O range 0x3000-0x303f
 pcib3: matched entry for 3.2.INTA
 pcib3: slot 2 INTA hardwired to IRQ 54
 found->        vendor=0x8086, dev=0x1079, revid=0x03
 bus=3, slot=2, func=0
 class=02-00-00, hdrtype=0x00, mfdev=1
 cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
 lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
 intpin=a, irq=54
 powerspec 2  supports D0 D3  current D0
 MSI supports 1 message, 64 bit
 map[10]: type 1, range 64, base dd320000, size 17, enabled
 pcib3: device (null) requested decoded memory range 0xdd320000-0xdd33ffff
 pcib1: device (null) requested decoded memory range 0xdd320000-0xdd33ffff
 map[20]: type 4, range 32, base 00003040, size  6, enabled
 pcib3: device (null) requested decoded I/O range 0x3040-0x307f
 pcib1: device (null) requested decoded I/O range 0x3040-0x307f
 pcib3: matched entry for 3.2.INTB
 pcib3: slot 2 INTB hardwired to IRQ 55
 found->        vendor=0x8086, dev=0x1079, revid=0x03
 bus=3, slot=2, func=1
 class=02-00-00, hdrtype=0x00, mfdev=1
 cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
 lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
 intpin=b, irq=55
 powerspec 2  supports D0 D3  current D0
 MSI supports 1 message, 64 bit
 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x3000-0x303f mem 0xdd300000-0xdd31ffff irq 54 at device 2.0 on pci3
 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdd300000
 em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x3000
 em0: [MPSAFE]
 em0: bpf attached
 em0: Ethernet address: 00:30:48:2c:41:de
 em0:  Speed:N/A  Duplex:N/A
 em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x3040-0x307f mem 0xdd320000-0xdd33ffff irq 55 at device 2.1 on pci3
 em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdd320000
 em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0x3040
 em1: [MPSAFE]
 em1: bpf attached
 em1: Ethernet address: 00:30:48:2c:41:df
 em1:  Speed:N/A  Duplex:N/A
 pci1: <base peripheral, interrupt controller> at device 0.3 (no driver attached)
 pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
 pcib4:   secondary bus     4
 pcib4:   subordinate bus   4
 pcib4:   I/O decode        0xf000-0xfff
 pcib4:   memory decode     0xfff00000-0xfffff
 pcib4:   prefetched decode 0xfff00000-0xfffff
 ACPI PCI link initial configuration:
 pci4: <ACPI PCI bus> on pcib4
 pci4: physical bus=4
 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
 pcib5:   secondary bus     5
 pcib5:   subordinate bus   5
 pcib5:   I/O decode        0xf000-0xfff
 pcib5:   memory decode     0xfff00000-0xfffff
 pcib5:   prefetched decode 0xfff00000-0xfffff
 ACPI PCI link initial configuration:
 pci5: <ACPI PCI bus> on pcib5
 pci5: physical bus=5
 uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1400-0x141f irq 16 at device 29.0 on pci0
 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1400
 uhci0: [GIANT-LOCKED]
 usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
 usb0: USB revision 1.0
 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1420-0x143f irq 19 at device 29.1 on pci0
 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1420
 uhci1: [GIANT-LOCKED]
 usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
 usb1: USB revision 1.0
 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x1440-0x145f irq 18 at device 29.2 on pci0
 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1440
 uhci2: [GIANT-LOCKED]
 usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
 usb2: USB revision 1.0
 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x1460-0x147f irq 16 at device 29.3 on pci0
 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1460
 uhci3: [GIANT-LOCKED]
 usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
 usb3: USB revision 1.0
 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub3: 2 ports with 2 removable, self powered
 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdd000000-0xdd0003ff irq 23 at device 29.7 on pci0
 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xdd000000
 ehci0: [GIANT-LOCKED]
 ehci_pci_attach: companion usb0
 ehci_pci_attach: companion usb1
 ehci_pci_attach: companion usb2
 ehci_pci_attach: companion usb3
 usb4: EHCI version 1.0
 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
 usb4: <EHCI (generic) USB 2.0 controller> on ehci0
 usb4: USB revision 2.0
 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub4: 8 ports with 8 removable, self powered
 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 pcib6:   secondary bus     6
 pcib6:   subordinate bus   6
 pcib6:   I/O decode        0x4000-0x4fff
 pcib6:   memory decode     0xdd400000-0xdeffffff
 pcib6:   prefetched decode 0xfff00000-0xfffff
 pcib6:   Subtractively decoded bridge.
 ACPI PCI link initial configuration:
 pci6: <ACPI PCI bus> on pcib6
 pci6: physical bus=6
 map[10]: type 1, range 32, base de000000, size 24, enabled
 pcib6: device (null) requested decoded memory range 0xde000000-0xdeffffff
 map[14]: type 4, range 32, base 00004000, size  8, enabled
 pcib6: device (null) requested decoded I/O range 0x4000-0x40ff
 map[18]: type 1, range 32, base dd400000, size 12, enabled
 pcib6: device (null) requested decoded memory range 0xdd400000-0xdd400fff
 pcib6: matched entry for 6.1.INTA
 pcib6: slot 1 INTA hardwired to IRQ 17
 found->        vendor=0x1002, dev=0x4752, revid=0x27
 bus=6, slot=1, func=0
 class=03-00-00, hdrtype=0x00, mfdev=0
 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
 lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
 intpin=a, irq=17
 powerspec 2  supports D0 D1 D2 D3  current D0
 pci6: <display, VGA> at device 1.0 (no driver attached)
 isab0: <PCI-ISA bridge> at device 31.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <Intel ICH5 UDMA100 controller> port 0x14a0-0x14af,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x14a0
 ata0: channel #0 on atapci0
 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
 ata0: reset tp1 mask=03 ostat0=00 ostat1=00
 ata0-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01
 ata0-slave:  stat=0x01 err=0x01 lsb=0x01 msb=0x01
 ata0: reset tp2 stat0=01 stat1=01 devices=0x0
 ata0: [MPSAFE]
 ata1: channel #1 on atapci0
 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
 ata1: reset tp1 mask=03 ostat0=51 ostat1=01
 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
 ata1-slave:  stat=0x01 err=0x04 lsb=0x00 msb=0x00
 ata1: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER>
 ata1: [MPSAFE]
 ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port 0x1100-0x111f irq 17 at device 31.3 on pci0
 ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1100
 ichsmb0: [GIANT-LOCKED]
 smbus0: <System Management Bus> on ichsmb0
 smb0: <SMBus generic I/O> on smbus0
 acpi_button0: <Power Button> on acpi0
 unknown: not probed (disabled)
 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 atkbd: the current kbd controller command byte 0047
 atkbd: keyboard ID 0x41ab (2)
 kbd0 at atkbd0
 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
 atkbd0: [GIANT-LOCKED]
 psm0: unable to allocate IRQ
 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
 psm0: current command byte:0047
 psm0: <PS/2 Mouse> irq 12 on atkbdc0
 psm0: [GIANT-LOCKED]
 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
 psm0: config:00000000, flags:00000008, packet size:3
 psm0: syncmask:c0, syncbits:00
 sio0: irq maps: 0x8001 0x8011 0x8001 0x8001
 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 sio0: type 16550A
 sio1: irq maps: 0x8001 0x8009 0x8001 0x8001
 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
 sio1: type 16550A
 fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
 fdc0: ic_type 90 part_id 73
 fdc0: [MPSAFE]
 fdc0: [FAST]
 fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 unknown: not probed (disabled)
 ata: ata0 already exists; skipping it
 ata: ata1 already exists; skipping it
 atkbdc: atkbdc0 already exists; skipping it
 fdc: fdc0 already exists; skipping it
 sio: sio0 already exists; skipping it
 sio: sio1 already exists; skipping it
 Trying Read_Port at 203
 Trying Read_Port at 243
 Trying Read_Port at 283
 Trying Read_Port at 2c3
 Trying Read_Port at 303
 Trying Read_Port at 343
 Trying Read_Port at 383
 Trying Read_Port at 3c3
 sc: sc0 already exists; skipping it
 vga: vga0 already exists; skipping it
 isa_probe_children: disabling PnP devices
 isa_probe_children: probing non-PnP devices
 orm0: <ISA Option ROMs> at iomem 0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
 pmtimer0 on isa0
 adv0: not probed (disabled)
 aha0: not probed (disabled)
 aic0: not probed (disabled)
 bt0: not probed (disabled)
 cs0: not probed (disabled)
 ed0: not probed (disabled)
 fe0: not probed (disabled)
 ie0: not probed (disabled)
 lnc0: not probed (disabled)
 pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
 pcic1: not probed (disabled)
 ppc0 failed to probe at irq 7 on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
 sio2: not probed (disabled)
 sio3: not probed (disabled)
 sn0: not probed (disabled)
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 fb0: vga0, vga, type:VGA (5), flags:0x7007f
 fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
 fb0: init mode:24, bios mode:3, current mode:24
 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
 VGA parameters upon power-up
 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
 VGA parameters in BIOS for mode 24
 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
 EGA/VGA parameters to be used for mode 24
 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
 vt0: not probed (disabled)
 isa_probe_children: probing PnP devices
 Device configuration finished.
 Reducing kern.maxvnodes 134592 -> 100000
 procfs registered
 Timecounter "TSC" frequency 3400133824 Hz quality -100
 Timecounters tick every 10.000 msec
 lo0: bpf attached
 ipfw2 initialized, divert enabled, rule-based forwarding disabled, default to deny, logging disabled
 ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
 ata1-master: setting PIO4 on Intel ICH5 chip
 ata1-master: setting UDMA33 on Intel ICH5 chip
 acd0: <CD-224E/1.9A> CDROM drive at ata1 as master
 acd0: read 4134KB/s (4134KB/s), 128KB buffer, UDMA33
 acd0: Reads: CDR, CDRW, CDDA stream, packet
 acd0: Writes:
 acd0: Audio: play, 256 volume levels
 acd0: Mechanism: ejectable tray, unlocked
 acd0: Medium: no/blank disc
 Waiting 5 seconds for SCSI devices to settle
 (noperiph:ahd0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
 (noperiph:ahd1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
 ahd0: Selection Timeout on A:0. 0 SCBs aborted
 ahd1: Selection Timeout on A:0. 0 SCBs aborted
 ahd0: Selection Timeout on A:1. 0 SCBs aborted
 ahd1: Selection Timeout on A:1. 0 SCBs aborted
 ahd0: Selection Timeout on A:2. 0 SCBs aborted
 ahd1: Selection Timeout on A:2. 0 SCBs aborted
 ahd0: Selection Timeout on A:3. 0 SCBs aborted
 ahd1: Selection Timeout on A:3. 0 SCBs aborted
 ahd0: Selection Timeout on A:4. 0 SCBs aborted
 ahd1: Selection Timeout on A:4. 0 SCBs aborted
 ahd0: Selection Timeout on A:5. 0 SCBs aborted
 ahd1: Selection Timeout on A:5. 0 SCBs aborted
 ahd0: Selection Timeout on A:8. 0 SCBs aborted
 ahd1: Selection Timeout on A:6. 0 SCBs aborted
 ahd0: Selection Timeout on A:10. 0 SCBs aborted
 ahd1: Selection Timeout on A:8. 0 SCBs aborted
 ahd0: Selection Timeout on A:12. 0 SCBs aborted
 ahd1: Selection Timeout on A:9. 0 SCBs aborted
 ahd0: Selection Timeout on A:13. 0 SCBs aborted
 ahd1: Selection Timeout on A:10. 0 SCBs aborted
 ahd0: Selection Timeout on A:14. 0 SCBs aborted
 ahd1: Selection Timeout on A:11. 0 SCBs aborted
 ahd0: Selection Timeout on A:15. 0 SCBs aborted
 (probe8:ahd0:0:9:0): Retrying Command
 (probe10:ahd0:0:11:0): Retrying Command
 (ahd0:A:9:0): Sending PPR bus_width 1, period 8, offset fe, ppr_options ff
 Interrupt storm detected on "irq16: uhci0 uhci3"; throttling interrupt source
 ahd1: Selection Timeout on A:12. 0 SCBs aborted
 (ahd0:A:9:0): Received PPR width 1, period 8, offset 3f,options ff
 Filtered to width 1, period 8, offset 3f, options ff
 ahd0: target 9 using 16bit transfers
 ahd0: target 9 synchronous with period = 0x8, offset = 0x3f(RDSTRM|DT|IU|RTI|QAS)
 (ahd0:A:11:0): Sending PPR bus_width 1, period 8, offset fe, ppr_options ff
 (ahd0:A:11:0): Received PPR width 1, period 8, offset 3f,options ff
 Filtered to width 1, period 8, offset 3f, options ff
 ahd0: target 11 using 16bit transfers
 ahd0: target 11 synchronous with period = 0x8, offset = 0x3f(RDSTRM|DT|IU|RTI|QAS)
 ahd0: Invalid Sequencer interrupt occurred.
 >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
 ahd0: Dumping Card State at program address 0x23b Mode 0x0
 Card was paused
 INTSTAT[0x0] SELOID[0xb] SELID[0x90] HS_MAILBOX[0x0]
 INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
 DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
 SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
 LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
 SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x6]:(INTMASK1|INTMASK2)
 SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x3]
 KERNEL_QFREEZE_COUNT[0x3] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
 SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
 SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0]
 LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0]
 LQOSTAT2[0x0]

 SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x9 NEXTSCB 0xff80
 qinstart = 39 qinfifonext = 39
 QINFIFO:
 WAITING_TID_QUEUES:
 Pending list:
 Total 0
 Kernel Free SCB list: 9 7 5 1 2 3 4 6 8 10 11 12 13 14 15 0
 Sequencer Complete DMA-inprog list:
 Sequencer Complete list:
 Sequencer DMA-Up and Complete list:
 Sequencer On QFreeze and Complete list:


 ahd0: FIFO0 Free, LONGJMP == 0x8000, SCB 0x7
 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
 SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
 SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
 SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)

 ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x9
 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
 SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
 SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
 SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
 LQIN: 0x8 0x0 0x0 0x7 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
 ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42
 ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
 ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0

 SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
 CCSCBCTL[0x4]:(CCSCBDIR)
 ahd0: REG0 == 0xece9, SINDEX = 0x10e, DINDEX = 0x118
 ahd0: SCBPTR == 0x7, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff30
 CDB 12 20 0 80 88 ba
 STACK: 0x236 0x2 0x0 0x0 0x0 0x0 0x0 0x0
 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
 ahd0: target 9 using 8bit transfers
 ahd0: target 9 using asynchronous transfers
 ahd0: target 11 using 8bit transfers
 ahd0: target 11 using asynchronous transfers
 ahd1: Selection Timeout on A:13. 0 SCBs aborted
 ahd1: Selection Timeout on A:14. 0 SCBs aborted
 ahd1: Selection Timeout on A:15. 0 SCBs aborted
 (ahd0:A:9:2): Sending PPR bus_width 1, period 8, offset 3f, ppr_options ff
 (ahd0:A:9:2): Received PPR width 1, period 8, offset 3f,options ff
 Filtered to width 1, period 8, offset 3f, options ff
 ahd0: target 9 using 16bit transfers
 ahd0: target 9 synchronous with period = 0x8, offset = 0x3f(RDSTRM|DT|IU|RTI|QAS)
 (probe0:ahd0:0:9:2): Request Requeued
 (probe0:ahd0:0:9:2): Retrying Command
 (ahd0:A:11:1): Sending PPR bus_width 1, period 8, offset 3f, ppr_options ff
 (ahd0:A:11:1): Received PPR width 1, period 8, offset 3f,options ff
 Filtered to width 1, period 8, offset 3f, options ff
 ahd0: target 11 using 16bit transfers
 ahd0: target 11 synchronous with period = 0x8, offset = 0x3f(RDSTRM|DT|IU|RTI|QAS)
 (probe1:ahd0:0:11:1): Request Requeued
 (probe1:ahd0:0:11:1): Retrying Command
 pass0 at ahd0 bus 0 target 6 lun 0
 pass0: <SUPER GEM318 0> Fixed Processor SCSI-2 device
 pass0: Serial Number 1
 pass0: 3.300MB/s transfers
 pass1 at ahd0 bus 0 target 9 lun 0
 pass1: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device
 pass1: Serial Number 3JA9SY5300007516JBPE
 pass1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
 pass2 at ahd0 bus 0 target 11 lun 0
 pass2: <SEAGATE ST373307LC 0007> Fixed Direct Access SCSI-3 device
 pass2: Serial Number 3HZ0RBHT000074423ZKC
 pass2: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
 ses0 at ahd0 bus 0 target 6 lun 0
 ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 device
 ses0: Serial Number 1
 ses0: 3.300MB/s transfers
 ses0: SAF-TE Compliant Device
 Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0
 Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0
 (da0:ahd0:0:9:0): Retrying Command
 (da1:ahd0:0:11:0): Retrying Command
 da0 at ahd0 bus 0 target 9 lun 0
 da0: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device
 da0: Serial Number 3JA9SY5300007516JBPE
 da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
 da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
 da1 at ahd0 bus 0 target 11 lun 0
 da1: <SEAGATE ST373307LC 0007> Fixed Direct Access SCSI-3 device
 da1: Serial Number 3HZ0RBHT000074423ZKC
 da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
 da1: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
 GEOM: new disk da0
 GEOM: new disk da1
 SMP: AP CPU #3 Launched!
 cpu3 AP:
 ID: 0x07000000   VER: 0x00050014 LDR: 0x08000000 DFR: 0x0fffffff
 lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
 SMP: AP CPU #1 Launched!
 cpu1 AP:
 ID: 0x01000000   VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff
 lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
 SMP: AP CPU #2 Launched!
 cpu2 AP:
 ID: 0x06000000   VER: 0x00050014 LDR: 0x04000000 DFR: 0x0fffffff
 lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
 ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
 ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
 ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
 ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
 ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
 ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
 ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
 ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
 ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
 ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
 ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
 ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
 ioapic1: routing intpin 8 (PCI IRQ 32) to cluster 0
 ioapic1: routing intpin 9 (PCI IRQ 33) to cluster 0
 ioapic2: routing intpin 6 (PCI IRQ 54) to cluster 0
 ioapic2: routing intpin 7 (PCI IRQ 55) to cluster 0
 [0] f:80 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:71665902
 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
 GEOM: Configure da0s1, start 32256 length 36692941824 end 36692974079
 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:143363997
 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
 GEOM: Configure da1s1, start 32256 length 73402366464 end 73402398719
 GEOM: Configure da1s1a, start 0 length 268435456 end 268435455
 GEOM: Configure da1s1b, start 268435456 length 4267474944 end 4535910399
 GEOM: Configure da1s1c, start 0 length 73402366464 end 73402366463
 GEOM: Configure da1s1d, start 4535910400 length 268435456 end 4804345855
 GEOM: Configure da1s1e, start 4804345856 length 268435456 end 5072781311
 GEOM: Configure da1s1f, start 5072781312 length 68329585152 end 73402366463
 Mounting root from ufs:/dev/da1s1a
 WARNING: / was not properly dismounted
 start_init: trying /sbin/init
 WARNING: /tmp was not properly dismounted
 WARNING: /usr was not properly dismounted
 WARNING: /var was not properly dismounted


 Thanks,

 Mike.




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?213762780.20050221015539>