Date: Sun, 26 Aug 2007 23:29:33 +0300 From: "Sander Vesik" <sander.vesik@gmail.com> To: "M. Warner Losh" <imp@bsdimp.com> Cc: freebsd-mobile@freebsd.org Subject: Re: ral0 / cardbus problems on Lenovo T61 Message-ID: <dcb2c27a0708261329u6ed6dd24va0884c327032784c@mail.gmail.com> In-Reply-To: <20070818.110112.-300782959.imp@bsdimp.com> References: <dcb2c27a0708140255h342b9695qecbeca0f223862ac@mail.gmail.com> <20070818.110112.-300782959.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Unfortunately, yes, it also has it. While it only gives " cardbus0: Expecting link target, got 0x0", but the BBP read/write errors are still there. On 8/18/07, M. Warner Losh <imp@bsdimp.com> wrote: > > In message: <dcb2c27a0708140255h342b9695qecbeca0f223862ac@mail.gmail.com> > "Sander Vesik" <sander.vesik@gmail.com> writes: > : Hi! > : > : I'm having trouble using a ral based card (MSI CB54G2) in a Lenovo T61. > Upon > : inserting the card (or the boot process for that matter), it prints: > : > : cardbus0: Expecting link target, got 0x0 > : cardbus0: Resource not specified in CIS: id=10, size 2000 > : ral0: <Ralink Technology RT2560> mem 0x88000000-0x88001fff irq 16 at > device > : 0.0 on cardbus0 > : ral0: MAC/BBP RT2560 (rev 0x00) RF RT2522 > : > : It then fails to read the MAC address from (gets a different wrong > answer > : every time) and upon trying to execute wpa_suplicant prints a lot of > "ral0: > : could not to write to BBP" and doesn't work. > : > : The same card works fine in a different (HP) laptop, so I'm assuming > thatteh > : card itself and ral driver are ok. Any pointers to getting this to work? > I > : need to return the HP laptop soonish and get the T61 to work ... > > Which rev of FreeBSD? And does the latest 7.0 snapshot have this > problem? > > Warner >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?dcb2c27a0708261329u6ed6dd24va0884c327032784c>