Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 9 Jan 1999 17:50:47 +0100 (CET)
From:      Wilko Bulte <wilko@yedi.iaf.nl>
To:        dfr@nlsystems.com (Doug Rabson)
Cc:        freebsd-alpha@FreeBSD.ORG
Subject:   Re: porting to EB64+ / Alpine
Message-ID:  <199901091650.RAA22522@yedi.iaf.nl>
In-Reply-To: <Pine.BSF.4.01.9901091253270.391-100000@herring.nlsystems.com> from Doug Rabson at "Jan 9, 99 12:57:13 pm"

next in thread | previous in thread | raw e-mail | index | archive | help
As Doug Rabson wrote...
> On Sat, 9 Jan 1999, Wilko Bulte wrote:
> 
> > I hacked a bit on the EB64+ bits taken from NetBSD and I am as far as
> > getting:
> > 
> > boot: ethernet address: 00:00:f8:20:7f:45
> > netbbinfo invalid
> > boot: ethernet address: 00:00:f8:20:7f:45
> > netbbinfo invalid

How about this netbbinfo thingy? I now have 10base2 cable in use. Same
warning/error.

> > sc0 at port 0x60-0x6f irq 1 on isa0
> > sc0: CGA <16 virtual consoles, flags=0x0>
> > sio0 at port 0x3f8-0x3ff irq 4 on isa0
> > sio0: type 16550A
> > sio1: reserved for low-level i/o
> > panic: possible stack overflow
> > 
> > panic
> > Stopped at      Debugger..ng+0x24:      ldq     ra,0(sp)
> > <0xfffffc0000578230>   <ra=0xfffffc00004
> > 698b8,sp=0xfffffc0000578230>
> > db> 
> > 
> > I have also seen 'panic: clock not attached'. As I'm trying to find my way
> > around in the kernel source tree I appreciate any hints.
> 
> This usually happens if an interrupt is enabled but not handled.  The
> interrupt exception tries to return but is immediately reentered with a
> few bytes less stack.

Hmmmm. I'll start digging.

> You would get the "clock not attached" if mcclock isn't probed properly
> but I can see that its present in your dmesg.  Strange.

Well, below is an example of this clock not attached thingy. Indeed 
mcclock is missing this time:

boot: ethernet address: 00:00:f8:20:7f:45
/kernel data=0x181ae8+0x24db0 syms=[0x8+0x3b220+0x8+0x2819a]
Entering kernel at 0xfffffc000031e2e0...
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #4: Sat Jan  9 11:20:42 CET 1999
    root@axp33.iaf.nl:/usr/src/sys/compile/ALPINE
EB64+
Alpha 21064A Evaluation Board 274 MHz, 274MHz
8192 byte page size, 1 processor.
CPU: EV45 (21064A) major=6 minor=2
OSF PAL rev: 0x100070002012d
real memory  = 65028096 (63504K bytes)
avail memory = 58761216 (57384K bytes)
Preloaded elf kernel "kernel" at 0xfffffc000050c000.
apecs0: <DECchip 21072 Core Logic chipset>
isa0
Probing for devices on PCI bus 0:
ncr0: <ncr 53c810 fast10 scsi> rev 0x01 int a irq 7 on pci0.5.0
de0: <Digital 21040 Ethernet> rev 0x23 int a irq 0 on pci0.6.0
de0: DEC 21040 [10Mb/s] pass 2.3
de0: address 00:00:f8:20:7f:45
vga0: <S3 Trio 64 graphics accelerator> rev 0x16 int a irq 1 on pci0.7.0
chip0: <Intel 82378ZB PCI to ISA bridge> rev 0x03 on pci0.8.0
sc0 at port 0x60-0x6f irq 1 on isa0
sc0: CGA <16 virtual consoles, flags=0x0>
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio1: reserved for low-level i/o
panic: cpu_initclocks: no clock attached
panic
Stopped at      Debugger..ng+0x24:      ldq     ra,0(sp)
<0xfffffc0000511cc0>   
<ra=0xfffffc0000413f58,sp=0xfffffc0000511cc0>
db> 
db> 

The reason for this escapes me at the moment.

Wilko
_     ______________________________________________________________________
 |   / o / /  _  Bulte 				  email: wilko@yedi.iaf.nl 
 |/|/ / / /( (_) Arnhem, The Netherlands          WWW  : http://www.tcja.nl
______________________________________________ Powered by FreeBSD __________

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199901091650.RAA22522>