Date: Fri, 25 Feb 2005 07:19:58 -0800 From: Matthew Jacob <lydianconcepts@gmail.com> To: Morten Liebach <m@mongers.org> Cc: freebsd-questions@freebsd.org Subject: Re: Qlogic ISP 2200, DL-380 and EVA 5000 SAN; how? Message-ID: <7579f7fb05022507193669730d@mail.gmail.com> In-Reply-To: <20050225135212.GB5159@mongers.org> References: <20050221155422.GB3746@mongers.org> <20050221162947.GA67330@dan.emsphone.com> <20050222084330.GA19901@mongers.org> <7579f7fb050222115474f8edef@mail.gmail.com> <20050224092823.GA11106@mongers.org> <7579f7fb05022412496720a299@mail.gmail.com> <20050225135212.GB5159@mongers.org>
next in thread | previous in thread | raw e-mail | index | archive | help
And just reconfirming- a 'camcontrol rescan 3:0:1' does *not* see the disk? On Fri, 25 Feb 2005 14:52:12 +0100, Morten Liebach <m@mongers.org> wrote: > On 2005-02-24 12:49:48 -0800, Matthew Jacob wrote: > > > > Or give us a /proc/scsi/scsi output dump? > > > > > > No such file. (And yes, /proc is mounted). > > > > I meant from the linux box. > > $ cat /proc/scsi/scsi > Attached devices: > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: COMPAQ Model: HSV110 (C)COMPAQ Rev: 3010 > Type: Unknown ANSI SCSI revision: 02 > Host: scsi1 Channel: 00 Id: 00 Lun: 00 > Vendor: COMPAQ Model: HSV110 (C)COMPAQ Rev: 3020 > Type: Unknown ANSI SCSI revision: 02 > Host: scsi1 Channel: 00 Id: 00 Lun: 01 > Vendor: COMPAQ Model: HSV110 (C)COMPAQ Rev: 3020 > Type: Direct-Access ANSI SCSI revision: 02 > > > > > Can you tell us the connection topology other than "same SAN"? > > > > > > A fiber goes straight from the SAN, a HP StorageWorks HSV 110 box, to a > > > HP StorageWorks SAN Switch 2/8-EL, to which the Qlogic HBA is connected. > > > > Have you tried direct connect? > > Can't be done, it's our production environment and there's no ports > free. > > Have a nice day > Morten > > -- > http://m.mongers.org/weblog/ > __END__ >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7579f7fb05022507193669730d>