Date: Wed, 28 Jul 2004 22:12:55 -0400 (EDT) From: up@3.am To: Dan Nelson <dnelson@allantgroup.com> Cc: freebsd-questions@freebsd.org Subject: Re: DLT "device not configured" errors Message-ID: <Pine.BSF.4.44.0407282212001.12551-100000@richard2.pil.net> In-Reply-To: <20040729011550.GA26125@dan.emsphone.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 28 Jul 2004, Dan Nelson wrote: > In the last episode (Jul 28), up@3.am said: > > A few months ago I brought up a new server using an Adaptec 2200S RAID > > card, and it's been running fine with a RAID 1 array on channel 0. Today > > I tried to move the DLT (Quantum 4000) over to this server to make it the > > amanda server, so I plugged it into the controller's external port for > > channel 1. When I do, neither amanda or mt will see the device, I get: > > > > mt: /dev/nsa0: Device not configured > > This could mean that there's no tape in the drive. Does "camcontrol > devlist" see the drive? Also make sure you have the "aacp" device in the > kernel; that allows non-disk devices to pass through the raid controller and > be seen by FreeBSD. The "aacp" device did the trick, for both the drive and camcontrol. Thanks! James Smallacombe PlantageNet, Inc. CEO and Janitor up@3.am http://3.am =========================================================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.44.0407282212001.12551-100000>