Date: Wed, 29 Aug 2007 16:33:09 +0400 From: Vladimir Grebenschikov <vova@sw.ru> To: Henrik Brix Andersen <henrik@brixandersen.dk> Cc: freebsd-mobile <freebsd-mobile@freebsd.org> Subject: Re: Need help with connection PCMCI celluar modem under FreeBSD 7-CURRENT (recent) Message-ID: <1188390789.1814.10.camel@localhost> In-Reply-To: <20070829103411.GA6724@tirith.brixandersen.dk> References: <1187996538.1522.10.camel@localhost> <20070829200110.3436a577@localhost> <1188383533.1564.35.camel@localhost> <20070829103411.GA6724@tirith.brixandersen.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
=F7 =D3=D2, 29/08/2007 =D7 12:34 +0200, Henrik Brix Andersen =D0=C9=DB=C5= =D4: > On Wed, Aug 29, 2007 at 02:32:13PM +0400, Vladimir Grebenschikov wrote: > > Thanks, but uart port on card does not answer et all. > > On M$win USB modem is answers on AT commands without problems. But I > > can't get usb host on PCMCI card detected on FreeBSD. >=20 > Have you tried ubsa(4) + ohci(4)? USB host is not detected, ohci as far as I know is loaded in usb.ko :(=20 Probably it is due to "Multifunctional" PCMCI card - it has two functions - one of functions is uart port (detected, attached, but does not respond).=20 And another function, looks like, USB host adapter - it is not detected by FreeBSD. function ID=3D254 looks strange for me, see below log. Only PCMCI USB adapter I've found in tree besides [oeu]hci is slhci=20 (/sys/dev/usb/sl*, /sys/modules/slhci/, no manpage) It does not detect this card also. pccard0: check_cis_quirks pccard0: CIS version PC Card Standard 8.0 pccard0: CIS info: Ubiquam, UM-300, ,=20 pccard0: Manufacturer code 0x15d, product 0x4c45 pccard0: function 0: unknown (254), ccr addr 200 mask 73 pccard0: function 0, config table entry 55: I/O card; irq mask ffff; iomask= 3, iospace 2f8-300; io8 irqshare irqlevel pccard0: function 1: serial port, ccr addr 220 mask 63 pccard0: function 1, config table entry 63: I/O card; irq mask ffff; iomask= 3, iospace 3f8-400; io8 irqshare irqlevel pccard0: functions scanning pccard0: Card has 2 functions. pccard_mfc is 1 pccard0: I/O rid 0 start 2f8 end 300 pccard0: Allocation failed for cfe 55 pccard0: No config entry could be allocated. pccard0: I/O rid 0 start 3f8 end 400 pccard0: ccr_res =3D=3D 88000000-880003ff, base=3D220 unknown: MFC: I/O base 0 IOSIZE 0x1 pccard0: function 0 CCR at 0 offset 0: 8f 77 cc 77, ff ff ff 8f, 77 pccard0: function 1 CCR at 0 offset 220: 7f 20 0 0, 0 0 0 0, 0 uart0: <Ubiquam UM-300> at port 0x400-0x408 irq 16 function 1 config 63 on = pccard0 uart0: MFC: I/O base 0x400 IOSIZE 0x10 uart0: MFC: I/O base 0x400 IOSIZE 0x10 uart0: [FILTER] pccard0: function 1 CCR at 0 offset 220 mask 63: 7f 20 0 0, 0 4 0 0, 0 cis mem map 0xe7b37000 (resource: 0x88010000) > Regards, > Brix --=20 Vladimir B. Grebenschikov SWsoft Inc. vova@swsoft.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1188390789.1814.10.camel>