Date: Sun, 1 Feb 2004 08:35:29 -0700 (MST) From: Warren Block <wblock@wonkity.com> To: mobile@freebsd.org Subject: 5.2-Release, Tecra 8000, Sound Message-ID: <20040201081606.V28514@wonkity.com>
next in thread | raw e-mail | index | archive | help
So far, a fresh install of 5.2 on my Tecra 8000 has been working well.
The only thing that almost-but-not-quite works is sound. It had worked
fine on 4.6-stable, the previous version installed on this unit.
Both kldloading snd_driver and adding pcm to the kernel have been tried,
both with and without adding the ISA device hints:
hint.pcm.0.at="isa"
hint.pcm.0.irq="5"
hint.pcm.0.drq="1"
hint.pcm.0.flags="0x0"
to both /boot/device.hints and the kernel .hints file. Either
combination results in the same thing. The sound driver loads, but
doesn't produce any sound. Using mixer to change volume, even CD
volume, doesn't result in any audible sound from playing a CD.
Note the device_probe_and_attach: pcm0 attach returned 6 errors in the
dmesg that follows. The other thing that looks a little weird is the
flags; it comes back with 0xc100. Maybe that's a 5.x thing.
The BIOS is ACPI. If there's a way to disable ACPI, it's not obvious.
Any suggestions would be welcome. Thanks.
-----
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE #1: Sat Jan 31 23:11:59 MST 2004
root@toshibity:/usr/src/sys/i386/compile/TOSHIBITY
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09e5000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09e526c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (299.94-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 201261056 (191 MB)
avail memory = 185851904 (177 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750 > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe08-0xfe0b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00f1320
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 4 INTA is routed to irq 11
pcib0: slot 5 INTD is routed to irq 11
pcib0: slot 9 INTA is routed to irq 11
pci0: <display, VGA> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfe60-0xfe6f at device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xffe0-0xffff irq 11 at device 5.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 5.3 (no driver attached)
pci0: <simple comms> at device 9.0 (no driver attached)
cbb0: <ToPIC97 PCI-CardBus Bridge> at device 11.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: slot 11 INTA is routed to irq 11
cbb0: [MPSAFE]
cbb1: <ToPIC97 PCI-CardBus Bridge> at device 11.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: slot 11 INTB is routed to irq 11
cbb1: [MPSAFE]
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
fdc0: <NEC 765 or clone> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 299942541 Hz quality 800
Timecounters tick every 10.000 msec
rl0: <Accton MPX 5030/5038 10/100BaseTX> port 0x1000-0x10ff mem 0x88002000-0x880021ff irq 11 at device 0.0 on cardbus0
rl0: Ethernet address: 00:30:f1:11:5b:1a
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
GEOM: create disk ad0 dp=0xc2768160
ad0: 19077MB <TOSHIBA MK2018GAP> [38760/16/63] at ata0-master UDMA33
acd0: CDRW <HL-DT-ST CD-RW GCE-8080N> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks, buffers remaining... 7 7
done
Uptime: 13m56s
Shutting down ACPI
Rebooting...
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE #2: Sun Feb 1 08:57:24 MST 2004
root@toshibity:/usr/src/sys/i386/compile/TOSHIBITY
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a55000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a5526c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (299.94-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 201261056 (191 MB)
avail memory = 185851904 (177 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750 > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe08-0xfe0b on acpi0
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00f1320
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 4 INTA is routed to irq 11
pcib0: slot 5 INTD is routed to irq 11
pcib0: slot 9 INTA is routed to irq 11
pci0: <display, VGA> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfe60-0xfe6f at device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xffe0-0xffff irq 11 at device 5.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 5.3 (no driver attached)
pci0: <simple comms> at device 9.0 (no driver attached)
cbb0: <ToPIC97 PCI-CardBus Bridge> at device 11.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: slot 11 INTA is routed to irq 11
cbb0: [MPSAFE]
cbb1: <ToPIC97 PCI-CardBus Bridge> at device 11.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: slot 11 INTB is routed to irq 11
cbb1: [MPSAFE]
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
fdc0: <NEC 765 or clone> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
pcm0: <CS4231> port 0x530-0x537 on acpi0
device_probe_and_attach: pcm0 attach returned 6
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
pcm0: <OPL3-SAx (YMF719)> at port 0x538-0x539,0xf8c-0xf94,0xe0e,0x530-0x537 irq 5 drq 1 flags 0xc100 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 299942730 Hz quality 800
Timecounters tick every 10.000 msec
rl0: <Accton MPX 5030/5038 10/100BaseTX> port 0x1000-0x10ff mem 0x88002000-0x880021ff irq 11 at device 0.0 on cardbus0
rl0: Ethernet address: 00:30:f1:11:5b:1a
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
GEOM: create disk ad0 dp=0xc2714c60
ad0: 19077MB <TOSHIBA MK2018GAP> [38760/16/63] at ata0-master UDMA33
acd0: CDRW <HL-DT-ST CD-RW GCE-8080N> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
-Warren Block * Rapid City, South Dakota USA
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040201081606.V28514>