Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 07 Feb 2007 15:24:02 -0500
From:      Paul <bsdlist@cogeco.ca>
To:        freebsd-stable@freebsd.org
Subject:   Re: Filesystem corruption and bad perfomance with SRCS16 and PAE (raid 5 2TB)
Message-ID:  <20070207202410.7602F87E3@fep9.cogeco.net>

next in thread | raw e-mail | index | archive | help
Hi Artem,

Yes amd64 is for both Intel and AMD platforms.

I have been having troubles with the SRCS16 on the amd64 platform 6.2 
stable to give you the heads up if you are going this route.

I was able to get around the problem you mentioned (if it is the same 
problem) by creating two arrays. One array was 100GIGs and the other 
was the balance of the drive (about 1.7 TB). This seemed to get rid 
of the corruption issues. Perhaps give this a try? going too close to 
2TB was what I presumed was causing the corruption and read errors I 
was going as it went away when I installed the two arrays. I found a 
coupe of posts on another list that talk about this.

I am using a S5000PAL with 5 * 500GIG SATA drives with 6.2 stable amd64.

I did notice it was really SLOW when installing many parts of the new 
system and I am still very unhappy with the setup. Let me know your 
experience if you find it. I have done a bunch of benchmarking on 
this with the port tools but I am stuck at the freezing issue as that 
makes the system not usable.

I wonder if you try the amd64 if you have the same problem I am 
having (slow performance, it locks for like 10-15 minutes when trying 
to mount root on bootup, and there are freezes that seem to happen 
from time to time when writing to the file system). I am still trying 
to debug these problems but have not found anyone with the same 
mother board yet with a working 6.2 amd64 install.

I hope this helps.

Cheers,

Paul


At 02:43 PM 06/02/2007, you wrote:
>Hello!
>
>I've got an Intel  2400A  server to install FBSD. It has 4GB RAM,
>SRCS16 raid controller, configured 2TB (actually a little less, 
>about 1.9TB) RAID-5 array, Xeon 3.2Ghz
>
>Recently i have installed 6.2-R, cvsupped it to 6.2-STABLE
>(today, thanks to included csup utility, very convinient) and
>decided to turn on PAE so i can utilize all 4GB of RAM (w/o PAE
>i am loosing 512MB, too bad).




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070207202410.7602F87E3>