Date: Mon, 2 Jul 2001 15:45:06 -0600 From: "John R. Shannon" <john@johnrshannon.com> To: stable@FreeBSD.ORG Subject: Hard lockup Message-ID: <01070215450600.00581@pablo.johnrshannon.com>
next in thread | raw e-mail | index | archive | help
I'm also experiencing the lockups; 4 today since CVSUPing stable this AM. /var/run/dmesg.boot: Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-STABLE #25: Mon Jul 2 08:23:43 MDT 2001 root@pablo.johnrshannon.com:/usr/obj/usr/src/sys/MYKERNEL Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (999.53-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 1073676288 (1048512K bytes) avail memory = 1041965056 (1017544K bytes) Programming 16 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 16 pins in IOAPIC #1 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000 io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000 Preloaded elf kernel "kernel" at 0xc03ae000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <ServerWorks host to PCI bridge> on motherboard IOAPIC #1 intpin 2 -> irq 2 IOAPIC #1 intpin 12 -> irq 9 IOAPIC #1 intpin 10 -> irq 10 IOAPIC #1 intpin 11 -> irq 11 IOAPIC #1 intpin 15 -> irq 16 IOAPIC #0 intpin 10 -> irq 17 pci0: <PCI bus> on pcib0 pcib4: <PCI to PCI bridge (vendor=1166 device=0009)> at device 0.1 on pci0 IOAPIC #1 intpin 14 -> irq 18 pci1: <PCI bus> on pcib4 pci1: <ATI Rage128-RF graphics accelerator> at 0.0 irq 18 pcm0: <Creative CT5880-C> port 0xdf00-0xdf3f irq 2 at device 2.0 on pci0 ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0xde00-0xdeff mem 0xfeaff000-0xfeafffff irq 9 at device 4.0 on pci0 aic7860: Single Channel A, SCSI Id=7, 3/255 SCBs ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd000-0xd0ff mem 0xfeadc000-0xfeadcfff irq 10 at device 5.0 on pci0 aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBs ahc2: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xfeadf000-0xfeadffff irq 11 at device 5.1 on pci0 aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem 0xfe900000-0xfe9fffff,0xfeadd000-0xfeaddfff irq 16 at device 6.0 on pci0 fxp0: Ethernet address 00:30:48:10:79:16 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 ATA33 controller> port 0xffa0-0xffaf at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfeade000-0xfeadefff irq 17 at device 15.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard pci2: <PCI bus> on pcib1 pcib2: <ServerWorks host to PCI bridge> on motherboard pci3: <PCI bus> on pcib2 pcib3: <ServerWorks host to PCI bridge> on motherboard pci4: <PCI bus> on pcib3 orm0: <Option ROMs> at iomem 0xc0000-0xcafff,0xcc000-0xccfff,0xcd000-0xd2fff,0xd3000-0xd37ff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2 APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0 Waiting 15 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! (ahc2:A:5:0): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:1): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:2): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:3): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:4): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:5): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:6): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:7): refuses WIDE negotiation. Using 8bit transfers sa0 at ahc0 bus 0 target 5 lun 0 sa0: <Quantum DLT4000 D991> Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 15) da0 at ahc1 bus 0 target 0 lun 0 da0: <SEAGATE ST318404LW 0006> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) cd0 at ahc2 bus 0 target 5 lun 0 cd0: <YAMAHA CRW2100S 1.0H> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 7) cd0: cd present [17516 x 2048 byte records] Mounting root from ufs:/dev/da0s1a WARNING: / was not properly dismounted WARNING: R/W mount of /tmp denied. Filesystem is not clean - run fsck boot() called on cpu#1 Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks... done Restarting BSP cpu_reset_proxy: Grabbed mp lock for BSP cpu_reset_proxy: Stopped CPU 1 Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-STABLE #25: Mon Jul 2 08:23:43 MDT 2001 root@pablo.johnrshannon.com:/usr/obj/usr/src/sys/MYKERNEL Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (999.53-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 1073676288 (1048512K bytes) avail memory = 1041965056 (1017544K bytes) Programming 16 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 16 pins in IOAPIC #1 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000 io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000 Preloaded elf kernel "kernel" at 0xc03ae000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <ServerWorks host to PCI bridge> on motherboard IOAPIC #1 intpin 2 -> irq 2 IOAPIC #1 intpin 12 -> irq 9 IOAPIC #1 intpin 10 -> irq 10 IOAPIC #1 intpin 11 -> irq 11 IOAPIC #1 intpin 15 -> irq 16 IOAPIC #0 intpin 10 -> irq 17 pci0: <PCI bus> on pcib0 pcib4: <PCI to PCI bridge (vendor=1166 device=0009)> at device 0.1 on pci0 IOAPIC #1 intpin 14 -> irq 18 pci1: <PCI bus> on pcib4 pci1: <ATI Rage128-RF graphics accelerator> at 0.0 irq 18 pcm0: <Creative CT5880-C> port 0xdf00-0xdf3f irq 2 at device 2.0 on pci0 ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0xde00-0xdeff mem 0xfeaff000-0xfeafffff irq 9 at device 4.0 on pci0 aic7860: Single Channel A, SCSI Id=7, 3/255 SCBs ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd000-0xd0ff mem 0xfeadc000-0xfeadcfff irq 10 at device 5.0 on pci0 aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBs ahc2: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xfeadf000-0xfeadffff irq 11 at device 5.1 on pci0 aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem 0xfe900000-0xfe9fffff,0xfeadd000-0xfeaddfff irq 16 at device 6.0 on pci0 fxp0: Ethernet address 00:30:48:10:79:16 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 ATA33 controller> port 0xffa0-0xffaf at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfeade000-0xfeadefff irq 17 at device 15.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard pci2: <PCI bus> on pcib1 pcib2: <ServerWorks host to PCI bridge> on motherboard pci3: <PCI bus> on pcib2 pcib3: <ServerWorks host to PCI bridge> on motherboard pci4: <PCI bus> on pcib3 orm0: <Option ROMs> at iomem 0xc0000-0xcafff,0xcc000-0xccfff,0xcd000-0xd2fff,0xd3000-0xd37ff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2 APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0 Waiting 15 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! (ahc2:A:5:0): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:1): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:2): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:3): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:4): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:5): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:6): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:7): refuses WIDE negotiation. Using 8bit transfers sa0 at ahc0 bus 0 target 5 lun 0 sa0: <Quantum DLT4000 D991> Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 15) da0 at ahc1 bus 0 target 0 lun 0 da0: <SEAGATE ST318404LW 0006> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) cd0 at ahc2 bus 0 target 5 lun 0 cd0: <YAMAHA CRW2100S 1.0H> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 7) cd0: cd present [17516 x 2048 byte records] Mounting root from ufs:/dev/da0s1a pid 281 (Xaccel): trap 12 with interrupts disabled boot() called on cpu#0 Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks... 8 done Uptime: 17m59s Rebooting... cpu_reset called on cpu#0 cpu_reset: Stopping other CPUs Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-STABLE #25: Mon Jul 2 08:23:43 MDT 2001 root@pablo.johnrshannon.com:/usr/obj/usr/src/sys/MYKERNEL Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (999.53-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 1073676288 (1048512K bytes) avail memory = 1041965056 (1017544K bytes) Programming 16 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 16 pins in IOAPIC #1 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000 io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000 Preloaded elf kernel "kernel" at 0xc03ae000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <ServerWorks host to PCI bridge> on motherboard IOAPIC #1 intpin 2 -> irq 2 IOAPIC #1 intpin 12 -> irq 9 IOAPIC #1 intpin 10 -> irq 10 IOAPIC #1 intpin 11 -> irq 11 IOAPIC #1 intpin 15 -> irq 16 IOAPIC #0 intpin 10 -> irq 17 pci0: <PCI bus> on pcib0 pcib4: <PCI to PCI bridge (vendor=1166 device=0009)> at device 0.1 on pci0 IOAPIC #1 intpin 14 -> irq 18 pci1: <PCI bus> on pcib4 pci1: <ATI Rage128-RF graphics accelerator> at 0.0 irq 18 pcm0: <Creative CT5880-C> port 0xdf00-0xdf3f irq 2 at device 2.0 on pci0 ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0xde00-0xdeff mem 0xfeaff000-0xfeafffff irq 9 at device 4.0 on pci0 aic7860: Single Channel A, SCSI Id=7, 3/255 SCBs ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd000-0xd0ff mem 0xfeadc000-0xfeadcfff irq 10 at device 5.0 on pci0 aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBs ahc2: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xfeadf000-0xfeadffff irq 11 at device 5.1 on pci0 aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem 0xfe900000-0xfe9fffff,0xfeadd000-0xfeaddfff irq 16 at device 6.0 on pci0 fxp0: Ethernet address 00:30:48:10:79:16 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 ATA33 controller> port 0xffa0-0xffaf at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfeade000-0xfeadefff irq 17 at device 15.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard pci2: <PCI bus> on pcib1 pcib2: <ServerWorks host to PCI bridge> on motherboard pci3: <PCI bus> on pcib2 pcib3: <ServerWorks host to PCI bridge> on motherboard pci4: <PCI bus> on pcib3 orm0: <Option ROMs> at iomem 0xc0000-0xcafff,0xcc000-0xccfff,0xcd000-0xd2fff,0xd3000-0xd37ff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2 APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0 Waiting 15 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! (ahc2:A:5:0): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:1): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:2): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:3): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:4): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:5): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:6): refuses WIDE negotiation. Using 8bit transfers (ahc2:A:5:7): refuses WIDE negotiation. Using 8bit transfers sa0 at ahc0 bus 0 target 5 lun 0 sa0: <Quantum DLT4000 D991> Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 15) da0 at ahc1 bus 0 target 0 lun 0 da0: <SEAGATE ST318404LW 0006> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) cd0 at ahc2 bus 0 target 5 lun 0 cd0: <YAMAHA CRW2100S 1.0H> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 7) cd0: cd present [17516 x 2048 byte records] Mounting root from ufs:/dev/da0s1a @%9`%9 -- John R. Shannon john@johnrshannon.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01070215450600.00581>