Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 29 May 2009 08:51:41 +0200
From:      Josef Moellers <josef.moellers@ts.fujitsu.com>
To:        Polytropon <freebsd@edvax.de>
Cc:        "freebsd-questions@freebsd.org" <freebsd-questions@freebsd.org>
Subject:   Re: Failure to get past a PCI bridge
Message-ID:  <4A1F85FD.60400@ts.fujitsu.com>
In-Reply-To: <20090528184150.424feb6e.freebsd@edvax.de>
References:  <4A1E9E80.2070103@ts.fujitsu.com> <20090528184150.424feb6e.freebsd@edvax.de>

next in thread | previous in thread | raw e-mail | index | archive | help
Polytropon wrote:
> On Thu, 28 May 2009 16:24:00 +0200, Josef Moellers <josef.moellers@ts.fujitsu.com> wrote:
>   
>> The install kernel then boots properly and reaches the "Country Selection".
>> At that point, no keyboard input is accepted. An optical mouse is off, 
>> so I assume the keyboard to be off, too.
>>     
>
> Not neccessarily. Check the blinkenlights with caps lock,
> num lock and scroll lock (if present).
>   
BTDTNT.
> If optical mouse doesn't have any light, it's nearly obvious
> that it doesn't get power from the USB port. This doesn't
> need to imply that the keyboard is off, too.
Yes, but none of the *Lock key work either.

When trying to install without ACPI, I managed to get past the bridge, 
but then I got a Fatal trap:

---------------
igb0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xce260000
igb0: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xce200000
igb0: attempting to allocate 3 MSI-X vectors (10 supported)


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address   = 0x18
fault code              = supervisor read data, page not present
instruction pointer     = 0x8:0xffffffff803e127d
stack pointer           = 0x10:0xffffffff810d8830
frame pointer           = 0x10:0x3
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 0 (swapper)
trap number             = 12
panic: page fault
--------------

I'll talk to the BIOS guy again, but if someone has some other ideas, 
I'd be grateful.

Josef

-- 
These are my personal views and not those of Fujitsu Technology Solutions!
Josef Möllers (Pinguinpfleger bei FTS)
	If failure had no penalty success would not be a prize (T.  Pratchett)
Company Details: http://de.ts.fujitsu.com/imprint.html




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4A1F85FD.60400>