Date: Fri, 26 Jan 2001 22:31:40 +1000 From: "Doug Young" <dougy@bryden.apana.org.au> To: <ben@cahostnet.net>, <questions@FreeBSD.ORG> Subject: Re: New Kernel install Message-ID: <00d701c08793$f2048a60$847e03cb@apana.org.au> References: <20010126122322.EDB722748@sitemail.everyone.net>
next in thread | previous in thread | raw e-mail | index | archive | help
I tried the kernel compile in 4.2 earlier today & got similar response .... looks like some "feature" there that needs attention ----- Original Message ----- From: "Benjamin Ossei" <ben@cahostnet.net> To: <questions@FreeBSD.ORG> Sent: Friday, January 26, 2001 10:23 PM Subject: New Kernel install Hi, I'm trying to compile a new kernel for my machine. I used the GENERIC configuration as a starting point and added what I needed and commented out what I didn't want. I was able to issue the command /usr/sbin/config -g "newkernel" fine but when I go to build the kernel with the make depend or just make I get a stop error. The error indicates that there's unterminited string or something to the effect and gives me this "#IF" for the problem. I've gone through my kernel config and can not see anything. I'm not very good at this I should also say. I'm using Freebsd 4.2-Current. This is my first custom kernel. I've attached the file for your viewing and hopefully you can see my problem. I included the options IPFIREWALL_DEFAULT_TO_ACCEPT for now to get the machine up and running. I'll change this to DENY once I"m done and recompile the kernel. Thanks for your help. _____________________________________________________________ ========GET YOUR FREE E-MAIL============ http://freemail.cahostnet.net Web Hosting http://www.cahostnet.com ---------------------------------------------------------------------------- ---- > # > # GENERIC -- Generic kernel configuration file for FreeBSD/i386 > # > # For more information on this file, please read the handbook section on > # Kernel Configuration Files: > # > # http://www.FreeBSD.org/handbook/kernelconfig-config.html > # > # The handbook is also available locally in /usr/share/doc/handbook > # if you've installed the doc distribution, otherwise always see the > # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the > # latest information. > # > # An exhaustive list of options and more detailed explanations of the > # device lines is also present in the ./LINT configuration file. If you are > # in doubt as to the purpose or necessity of a line, check first in LINT. > # > # $FreeBSD: src/sys/i386/conf/FWKERNEL,v 1 2001/01/25 22:45 Ben Ossei Exp $ > > machine i386 > cpu I386_CPU > cpu I486_CPU > cpu I586_CPU > cpu I686_CPU > ident FWKERNEL > maxusers 64 > > # makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols > > # options MATH_EMULATE #Support for x87 emulation > options INET #InterNETworking > options INET6 #IPv6 communications protocols > options FFS #Berkeley Fast Filesystem > options FFS_ROOT #FFS usable as root device [keep this!] > options SOFTUPDATES #Enable FFS soft updates support > options MFS #Memory Filesystem > options MD_ROOT #MD is a potential root device > # options NFS #Network Filesystem > # options NFS_ROOT #NFS usable as root device, NFS required > # options MSDOSFS #MSDOS Filesystem > options CD9660 #ISO 9660 Filesystem > options CD9660_ROOT #CD-ROM usable as root, CD9660 required > options PROCFS #Process filesystem > options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] > options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI > # options UCONSOLE #Allow users to grab the console > options USERCONFIG #boot -c editor > options VISUAL_USERCONFIG #visual boot -c editor > options KTRACE #ktrace(1) support > options SYSVSHM #SYSV-style shared memory > options SYSVMSG #SYSV-style message queues > options SYSVSEM #SYSV-style semaphores > options P1003_1B #Posix P1003_1B real-time extensions > options _KPOSIX_PRIORITY_SCHEDULING > options ICMP_BANDLIM #Rate limit bad replies > options KBD_INSTALL_CDEV #install a CDEV entry in /dev > options IPFIREWALL > options IPFIREWALL_VERBOSE > options IPDIVERT > options IPFIREWALL_DEFAULT_TO_ACCEPT > options IPFIREWALL_VERBOSE_LIMIT=100 > options IPFILTER > options IPFILTER_LOG > > # To make an SMP kernel, the next two are needed > options SMP # Symmetric MultiProcessor Kernel > options APIC_IO # Symmetric (APIC) I/O > > device isa > device eisa > device pci > > # Floppy drives > device fdc0 at isa? port IO_FD1 irq 6 drq 2 > device fd0 at fdc0 drive 0 > # device fd1 at fdc0 drive 1 > > # ATA and ATAPI devices > device ata0 at isa? port IO_WD1 irq 14 > device ata1 at isa? port IO_WD2 irq 15 > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > device atapifd # ATAPI floppy drives > device atapist # ATAPI tape drives > options ATA_STATIC_ID #Static device numbering > # options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices > > # SCSI Controllers > # device ahb # EISA AHA1742 family > # device ahc # AHA2940 and onboard AIC7xxx devices > # device amd # AMD 53C974 (Teckram DC-390(T)) > # device isp # Qlogic family > # device ncr # NCR/Symbios Logic > # device sym # NCR/Symbios Logic (newer chipsets) > # options SYM_SETUP_LP_PROBE_MAP=0x40 > # Allow ncr to attach legacy NCR devices when > # both sym and ncr are configured > > # device adv0 at isa? > # device adw > # device bt0 at isa? > # device aha0 at isa? > # device aic0 at isa? > > # device ncv # NCR 53C500 > # device nsp # Workbit Ninja SCSI-3 > # device stg # TMC 18C30/18C50 > > # SCSI peripherals > # device scbus # SCSI bus (required) > # device da # Direct Access (disks) > # device sa # Sequential Access (tape etc) > # device cd # CD > # device pass # Passthrough device (direct SCSI access) > > # RAID controllers interfaced to the SCSI subsystem > # device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID > # device dpt # DPT Smartcache - See LINT for options! > # device mly # Mylex AcceleRAID/eXtremeRAID > > # RAID controllers > # device ida # Compaq Smart RAID > # device amr # AMI MegaRAID > # device mlx # Mylex DAC960 family > # device twe # 3ware Escalade > > # atkbdc0 controls both the keyboard and the PS/2 mouse > device atkbdc0 at isa? port IO_KBD > device atkbd0 at atkbdc? irq 1 flags 0x1 > device psm0 at atkbdc? irq 12 > > device vga0 at isa? > > # splash screen/screen saver > pseudo-device splash > > # syscons is the default console driver, resembling an SCO console > device sc0 at isa? flags 0x100 > > # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver > # device vt0 at isa? > # options XSERVER # support for X server on a vt console > # options FAT_CURSOR # start with block cursor > # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines > # options PCVT_SCANSET=2 # IBM keyboards are non-std > > # Floating point support - do not disable. > device npx0 at nexus? port IO_NPX irq 13 > > # Power management support (see LINT for more options) > device apm0 at nexus? disable flags 0x20 # Advanced Power Management > > # PCCARD (PCMCIA) support > # device card > # device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 > # device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable > > # Serial (COM) ports > device sio0 at isa? port IO_COM1 flags 0x10 irq 4 > device sio1 at isa? port IO_COM2 irq 3 > device sio2 at isa? disable port IO_COM3 irq 5 > device sio3 at isa? disable port IO_COM4 irq 9 > > # Parallel port > device ppc0 at isa? irq 7 > device ppbus # Parallel port bus (required) > device lpt # Printer > # device plip # TCP/IP over parallel > device ppi # Parallel port interface device > # device vpo # Requires scbus and da > > > # PCI Ethernet NICs. > # device de # DEC/Intel DC21x4x (``Tulip'') > device fxp # Intel EtherExpress PRO/100B (82557, 82558) > # device tx # SMC 9432TX (83c170 ``EPIC'') > device vx # 3Com 3c590, 3c595 (``Vortex'') > # device wx # Intel Gigabit Ethernet Card (``Wiseman'') > > # PCI Ethernet NICs that use the common MII bus controller code. > # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! > device miibus # MII bus support > device dc # DEC/Intel 21143 and various workalikes > # device pcn # AMD Am79C79x PCI 10/100 NICs > # device rl # RealTek 8129/8139 > # device sf # Adaptec AIC-6915 (``Starfire'') > # device sis # Silicon Integrated Systems SiS 900/SiS 7016 > # device ste # Sundance ST201 (D-Link DFE-550TX) > # device tl # Texas Instruments ThunderLAN > # device vr # VIA Rhine, Rhine II > # device wb # Winbond W89C840F > device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') > > # ISA Ethernet NICs. > # device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 > # device ex > # device ep > # device fe0 at isa? port 0x300 > # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really > # exists only as a PCMCIA device, so there is no ISA attatement needed > # and resources will always be dynamically assigned by the pccard code. > # device wi > # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will > # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP > # mode (the factory default). If you set the switches on your ISA > # card for a manually chosen I/O address and IRQ, you must specify > # those paremeters here. > # device an > # Xircom Ethernet > # device xe > # The probe order of these is presently determined by i386/isa/isa_compat.c. > # device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 > # device le0 at isa? port 0x300 irq 5 iomem 0xd0000 > # device lnc0 at isa? port 0x280 irq 10 drq 0 > # device cs0 at isa? port 0x300 > # device sn0 at isa? port 0x300 irq 10 > > # Pseudo devices - the number indicates how many units to allocated. > pseudo-device loop # Network loopback > pseudo-device ether # Ethernet support > # pseudo-device sl 1 # Kernel SLIP > # pseudo-device ppp 1 # Kernel PPP > # pseudo-device tun # Packet tunnel. > pseudo-device pty # Pseudo-ttys (telnet etc) > pseudo-device md # Memory "disks" > pseudo-device gif 4 # IPv6 and IPv4 tunneling > pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) > > # The `bpf' pseudo-device enables the Berkeley Packet Filter. > # Be aware of the administrative consequences of enabling this! > pseudo-device bpf #Berkeley packet filter > > # USB support > # device uhci # UHCI PCI->USB interface > # device ohci # OHCI PCI->USB interface > device usb # USB Bus (required) > device ugen # Generic > device uhid # "Human Interface Devices" > device ukbd # Keyboard > device ulpt # Printer > # device umass # Disks/Mass storage - Requires scbus and da > device ums # Mouse > # device uscanner # Scanners > # USB Ethernet, requires mii > # device aue # ADMtek USB ethernet > # device cue # CATC USB ethernet > # device kue # Kawasaki LSI USB ethernet > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00d701c08793$f2048a60$847e03cb>