Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 28 Oct 2003 16:49:08 -0800 (PST)
From:      "Dorin H." <dhogea@yahoo.com>
To:        jam6@cec.wustl.edu
Cc:        freebsd-stable@freebsd.org
Subject:   Re: 4.9:  ata1-slave glitch causes hangs on rebooting
Message-ID:  <20031029004908.36855.qmail@web60304.mail.yahoo.com>
In-Reply-To: <4214.128.252.19.173.1067373481.squirrel@clarion.cec.wustl.edu>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi Jeff,
  IMHO, there is not always a direct connection
between the displayed message and problematic
device(different initialization latencies). For
example pccard on my laptop: I got them after the
login prompt is displayed :)
 Try also a "boot -v", maybe you can pinpoint the
problem.  Did 4.8 work on your lap? Maybe you should
include the ata0: ata1: displayed messages (got while
you do a cold boot) to your question.
  Good luck
/Dorin. 

--- jam6@cec.wustl.edu wrote:
> Dorin--
> 
> My laptop has both a serial port and a parallel
> port.  I initially had
> parallel port support in my kernel, and when it was
> in there it was being
> loaded after sio1.  When this was the case, the
> bootup never froze after
> sio1, but it would instead freeze after the parallel
> port info lines...and
> again just before the ata-slave1 line.  So I may try
> taking out serial
> port support fully but I don't at all think that is
> the problem, because
> it constantly freezes before the ata-slave1 line,
> and does not seem to
> depend on what exactly is immediately before it.
> 
> When I remove the serial port and recompile I'll let
> you know how it turns
> out, but in the meantime if you have any other ideas
> they'd be
> appreciated.
> 
> Thanks,
> Jeff
> 
> 
> > --- Jeff Mitchell <jam6@cec.wustl.edu> wrote:
> >> As it's a laptop I don't really know what the
> jumper
> >> settings are on the ATA
> >> devices.  I've looked in the BIOS but there's no
> >> information in there
> >> either.
> >>
> >
> > <snip>
> >
> > Could it be the sio1? I would remove it or
> disabled it
> > from kernel.  In my case, my Toshiba laptop
> doesn't
> > have serial/parallel ports and always hangs while
> > booting. Disabling those solved all my problem,
> though
> > if you do have a second serial port, your problem
> > could be different. 2c.
> > /Dorin.
> >
> >
> >
> > =====
> > /Dorin.
> >
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! SiteBuilder - Free, easy-to-use web site
> design software
> > http://sitebuilder.yahoo.com
> >
> 


=====
/Dorin.

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031029004908.36855.qmail>