Date: Fri, 18 Mar 2005 11:31:46 +1000 From: "Tim Cleaver" <timcleaver@hotmail.com> To: freebsd-questions@freebsd.org Subject: make index failed: french/mozilla-flp failed Message-ID: <BAY102-F3348641E09FFBCE8E7720ED54A0@phx.gbl>
next in thread | raw e-mail | index | archive | help
Hello all, After a cvsup yesterday I have run into the following problem when running either make index or portsdb -uU: Generating INDEX-5 - please wait..fr-mozilla-flp-1.7.5_1: "/usr/ports/www/mozilla-devel-gtk2" non-existent -- dependency list incomplete ===> french/mozilla-flp failed *** Error code 1 ******************************************************************** Before reporting this error, verify that you are running a supported version of FreeBSD (see http://www.FreeBSD.org/ports/) and that you have a complete and up-to-date ports collection. (INDEX builds are not supported with partial or out-of-date ports collections -- in particular, if you are using cvsup, you must cvsup the "ports-all" collection, and have no "refuse" files.) If that is the case, then report the failure to ports@FreeBSD.org together with relevant details of your ports configuration (including FreeBSD version, your architecture, your environment, and your /etc/make.conf settings, especially compiler flags and WITH/WITHOUT settings). Note: the latest pre-generated version of INDEX may be fetched automatically with "make fetchindex". ******************************************************************** *** Error code 1 Stop in /usr/ports. *** Error code 1 Stop in /usr/ports. I have already googled for this problem and came up with the thread: http://lists.freebsd.org/pipermail/freebsd-questions/2004-July/051719.html but all the solutions offered there are no help. I have run cvsup multiple times and have no refuse files. I also do not have mozilla-devel-gtk installed (I have no mozilla anything installed the reason why is another story though). the output of uname -a is: FreeBSD pc078650.sci.griffith.edu.au 5.3-RELEASE-p1 FreeBSD 5.3-RELEASE-p1 #7: Tue Nov 23 11:49:52 EST 2004 tim@pc078650.sci.griffith.edu.au:/usr/obj/usr/src/sys/KERNCONF i386 the output of find / -iname refuse is: /usr/share/examples/cvsup/refuse /usr/src/share/examples/cvsup/refuse the output of pkg_info | grep moz is: (empty) the output of find / -iname moz | less is: (empty) my make.conf file is (essentially a copy of the example): # $FreeBSD: src/share/examples/etc/make.conf,v 1.229.2.5 2004/10/09 18:38:57 dougb Exp $ # # NOTE: Please would any committer updating this file also update the # make.conf(5) manual page, if necessary, which is located in # src/share/man/man5/make.conf.5. # # /etc/make.conf, if present, will be read by make (see # /usr/share/mk/sys.mk). It allows you to override macro definitions # to make without changing your source tree, or anything the source # tree installs. # # This file must be in valid Makefile syntax. # # There are additional things you can put into /etc/make.conf. # You have to find those in the Makefiles and documentation of # the source tree. # # Note, that you should not set MAKEOBJDIRPREFIX or MAKEOBJDIR # from make.conf (or as command line variables to make). # Both variables are environment variables for make and must be used as: # # env MAKEOBJDIRPREFIX=/big/directory make # # # The CPUTYPE variable controls which processor should be targeted for # generated code. This controls processor-specific optimizations in # certain code (currently only OpenSSL) as well as modifying the value # of CFLAGS to contain the appropriate optimization directive to gcc. # The automatic setting of CFLAGS may be overridden using the # NO_CPU_CFLAGS variable below. # Currently the following CPU types are recognized: # Intel x86 architecture: # (AMD CPUs) athlon-mp athlon-xp athlon-4 athlon-tbird athlon k6-3 # k6-2 k6 k5 # (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386 # Alpha/AXP architecture: ev67 ev6 pca56 ev56 ev5 ev45 ev4 # Intel ia64 architecture: itanium # # (?= allows to buildworld for a different CPUTYPE.) # #CPUTYPE?=p4 #NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically #NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically # # CFLAGS controls the compiler settings used when compiling C code. # Note that optimization settings other than -O and -O2 are not recommended # or supported for compiling the world or the kernel - please revert any # nonstandard optimization settings to "-O" before submitting bug reports # without patches to the developers. # Note also that at this time the -O2 setting is known to expose bugs in # libalias(3), and possibly other parts of the system. # #CFLAGS= -O -pipe # # CXXFLAGS controls the compiler settings used when compiling C++ code. # Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish # to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" # alone will remove the often needed contents of CFLAGS from CXXFLAGS. # #CXXFLAGS+= -fmemoize-lookups -fsave-memoized # # MAKE_SHELL controls the shell used internally by make(1) to process the # command scripts in makefiles. Three shells are supported, sh, ksh, and # csh. Using sh is most common, and advised. Using ksh *may* work, but is # not guaranteed to. Using csh is absurd. The default is to use sh. # #MAKE_SHELL?=sh # # BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested # for use in developing FreeBSD and testing changes. They can be used by # putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not # included here due to compiler bugs, e.g., mkdir()'s mode_t argument. # #BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ # -Wcast-qual -Wchar-subscripts -Winline \ # -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ # -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings # # To compile just the kernel with special optimizations, you should use # this instead of CFLAGS (which is not applicable to kernel builds anyway). # There is very little to gain by using higher optimization levels, and doing # so can cause problems. # #COPTFLAGS= -O -pipe # # To build the system compiler such that it forces high optimization levels to # a lower one. GCC -O2+ is known to trigger known optimizer bugs at various # times -- this is worse on the Alpha platform. The value assigned here will # be the highest optimization value used. #WANT_FORCE_OPTIMIZATION_DOWNGRADE=1 # # Compare before install #INSTALL=install -C # # Mtree will follow symlinks #MTREE_FOLLOWS_SYMLINKS= -L # # To build ppp with normal permissions #PPP_NOSUID= true # # To enable installing ssh(1) with the setuid bit turned on #ENABLE_SUID_SSH= true # # To enable installing newgrp(1) with the setuid bit turned on. # Without the setuid bit, newgrp cannot change users' groups. #ENABLE_SUID_NEWGRP= true # # To avoid building various parts of the base system: #NO_ACPI= true # do not build acpiconf(8) and related programs #NO_BOOT= true # do not build boot blocks and loader #NO_CVS= true # do not build CVS #NO_CXX= true # do not build C++ and friends #NO_BLUETOOTH= true # do not build Bluetooth related stuff #NO_DYNAMICROOT=true # do not link /bin and /sbin dynamically #NO_FORTRAN= true # do not build g77 and related libraries #NO_GDB= true # do not build GDB #NO_I4B= true # do not build isdn4bsd package #NO_IPFILTER= true # do not build IP Filter package #NO_PF= true # do not build PF firewall package #NO_AUTHPF= true # do not build and install authpf (setuid/gid) #NO_KERBEROS= true # do not build and install Kerberos 5 (KTH Heimdal) #NO_LPR= true # do not build lpr and related programs #NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector #NO_MODULES= true # do not build modules with the kernel #NO_OBJC= true # do not build Objective C support #NO_OPENSSH= true # do not build OpenSSH #NO_OPENSSL= true # do not build OpenSSL (implies NO_KERBEROS/NO_OPENSSH) #NO_SENDMAIL= true # do not build sendmail and related programs #NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs #NO_TCSH= true # do not build and install /bin/csh (which is tcsh) #NO_TOOLCHAIN= true # do not build programs for program development #NO_USB= true # do not build usbd(8) and related programs #NO_VINUM= true # do not build Vinum utilities #NOATM= true # do not build ATM related programs and libraries #NOCRYPT= true # do not build any crypto code #NOGAMES= true # do not build games (games/ subdir) #NOINET6= true # do not build IPv6 related programs and libraries #NOINFO= true # do not make or install info files #NOLIBC_R= true # do not build libc_r (re-entrant version of libc) #NOLIBPTHREAD= true # do not build libpthread (M:N threading library) #NOLIBTHR= true # do not build libthr (1:1 threading library) #NOMAN= true # do not build manual pages #NOPROFILE= true # Avoid compiling profiled libraries #NOSHARE= true # do not go into the share subdir # # Variables to control whether parts of the base BIND are built. # Defining NO_BIND makes all of the following BIND variables obsolete. # Please see the more detailed descriptions in make.conf(5). #NO_BIND= true # Do not build any part of BIND #NO_BIND_DNSSEC= true # Do not build dnssec-keygen, dnssec-signzone #NO_BIND_ETC= true # Do not install files to /etc/namedb #NO_BIND_LIBS_LWRES= true # Do not install the lwres library #NO_BIND_MTREE= true # Do not run mtree to create chroot directories #NO_BIND_NAMED= true # Do not build named, rndc, lwresd, etc. #NO_BIND_UTILS= true # Do not build dig, host, nslookup, nsupdate #WITH_BIND_LIBS= true # Install the BIND libs and include files # # To build sys/modules when building the world (our old way of doing things) #MODULES_WITH_WORLD=true # do not build modules when building kernel # # The list of modules to build instead of all of them. #MODULES_OVERRIDE= linux ipfw # # The following controls building optional IDEA code in libcrypto and # certain ports. Patents are involved - you must not use this unless # you either have a license or fall within patent 'fair use' # provisions. # # *** It is YOUR RESPONSIBILITY to determine if you can use this! *** # # IDEA is patented in the USA and many European countries - thought to # be OK to use for any non-commercial use. This is optional. #MAKE_IDEA= YES # IDEA (128 bit symmetric encryption) # # If you do not want unformatted manual pages to be compressed # when they are installed: # #NOMANCOMPRESS= true # # # If you want the "compat" shared libraries installed as part of your normal # builds, uncomment these: # #COMPAT1X= yes #COMPAT20= yes #COMPAT21= yes #COMPAT22= yes #COMPAT3X= yes #COMPAT4X= yes # # # Default format for system documentation, depends on your printer. # Set this to "ascii" for simple printers or screen # #PRINTERDEVICE= ps # # # How long to wait for a console keypress before booting the default kernel. # This value is approximately in milliseconds. Keypresses are accepted by the # BIOS before booting from disk, making it possible to give custom boot # parameters even when this is set to 0. # #BOOTWAIT=0 #BOOTWAIT=30000 # # By default, the system will always use the keyboard/video card as system # console. However, the boot blocks may be dynamically configured to use a # serial port in addition to or instead of the keyboard/video console. # # By default we use COM1 as our serial console port *if* we're going to use # a serial port as our console at all. Alter as necessary. # # COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 # #BOOT_COMCONSOLE_PORT= 0x3F8 # # The default serial console speed is 9600. Set the speed to a larger value # for better interactive response. # #BOOT_COMCONSOLE_SPEED= 115200 # # By default the 'pxeboot' loader retrieves the kernel via NFS. Defining # this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel # via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet # still mount the server's '/' (i.e. rather than load the server's kernel). # #LOADER_TFTP_SUPPORT= YES # # # Kerberos 5 su (k5su) # If you want to use the k5su utility, define this to have it installed # set-user-ID. #ENABLE_SUID_K5SU= yes # # # CVSup update flags. Edit SUPFILE settings to reflect whichever distribution # file(s) you use on your site (see /usr/share/examples/cvsup/README for more # information on CVSup and these files). To use, do "make update" in /usr/src. # #SUP_UPDATE= yes # #SUP= /usr/local/bin/cvsup #SUPFLAGS= -g -L 2 #SUPHOST= cvsup.uk.FreeBSD.org #SUPFILE= /usr/share/examples/cvsup/standard-supfile #PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile #DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile # # top(1) uses a hash table for the user names. The size of this hash # can be tuned to match the number of local users. The table size should # be a prime number approximately twice as large as the number of lines in # /etc/passwd. The default number is 20011. # #TOP_TABLE_SIZE= 101 # # Documentation # # The list of languages and encodings to build and install # #DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R # # # sendmail # # The following sets the default m4 configuration file to use at # install time. Use with caution as a make install will overwrite # any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now # deprecated. The value should be a fully qualified path name. # #SENDMAIL_MC=/etc/mail/myconfig.mc # # The following sets the default m4 configuration file for mail # submission to use at install time. Use with caution as a make # install will overwrite any existing /etc/mail/submit.cf. The # value should be a fully qualified path name. # #SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc # # If you need to build additional .cf files during a make buildworld, # include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. # #SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc # # The following overrides the default location for the m4 configuration # files used to build a .cf file from a .mc file. # #SENDMAIL_CF_DIR=/usr/local/share/sendmail/cf # # Setting the following variable modifies the flags passed to m4 when # building a .cf file from a .mc file. It can be used to enable # features disabled by default. # #SENDMAIL_M4_FLAGS= # # Setting the following variables modifies the build environment for # sendmail and its related utilities. For example, SASL support can be # added with settings such as: # # with SASLv1: # SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL # SENDMAIL_LDFLAGS=-L/usr/local/lib # SENDMAIL_LDADD=-lsasl # # with SASLv2: # SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 # SENDMAIL_LDFLAGS=-L/usr/local/lib # SENDMAIL_LDADD=-lsasl2 # # Note: If you are using Cyrus SASL with other applications which require # access to the sasldb file, you should add the following to your # sendmail.mc file: # # define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') # #SENDMAIL_CFLAGS= #SENDMAIL_LDFLAGS= #SENDMAIL_LDADD= #SENDMAIL_DPADD= # # Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a # set-user-ID root binary instead of a set-group-ID smmsp binary and will # prevent the installation of /etc/mail/submit.cf. # This is a deprecated mode of operation. See etc/mail/README for more # information. # #SENDMAIL_SET_USER_ID= # # The permissions to use on alias and map databases generated using # /etc/mail/Makefile. Defaults to 0640. # #SENDMAIL_MAP_PERMS= # # Specify the X11 implementation being used X_WINDOW_SYSTEM=xorg # added by use.perl 2005-02-04 18:36:52 PERL_VER=5.8.6 PERL_VERSION=5.8.6 and my cvsup-file is: # $FreeBSD: src/share/examples/cvsup/ports-supfile,v 1.32 2004/05/24 06:23:15 cjc Exp $ # # This file contains all of the "CVSup collections" that make up the # FreeBSD-current ports collection. # # CVSup (CVS Update Protocol) allows you to download the latest CVS # tree (or any branch of development therefrom) to your system easily # and efficiently (far more so than with sup, which CVSup is aimed # at replacing). If you're running CVSup interactively, and are # currently using an X display server, you should run CVSup as follows # to keep your CVS tree up-to-date: # # cvsup ports-supfile # # If not running X, or invoking cvsup from a non-interactive script, then # run it as follows: # # cvsup -g -L 2 ports-supfile # # You may wish to change some of the settings in this file to better # suit your system: # # host=CHANGE_THIS.FreeBSD.org # This specifies the server host which will supply the # file updates. You must change it to one of the CVSup # mirror sites listed in the FreeBSD Handbook at # http://www.freebsd.org/doc/handbook/mirrors.html. # You can override this setting on the command line # with cvsup's "-h host" option. # # base=/var/db # This specifies the root where CVSup will store information # about the collections you have transferred to your system. # A setting of "/var/db" will generate this information in # /var/db/sup. Even if you are CVSupping a large number of # collections, you will be hard pressed to generate more than # ~1MB of data in this directory. You can override the # "base" setting on the command line with cvsup's "-b base" # option. This directory must exist in order to run CVSup. # # prefix=/usr # This specifies where to place the requested files. A # setting of "/usr" will place all of the files requested # in "/usr/ports" (e.g., "/usr/ports/devel", "/usr/ports/lang"). # The prefix directory must exist in order to run CVSup. # Defaults that apply to all the collections # # IMPORTANT: Change the next line to use one of the CVSup mirror sites # listed at http://www.freebsd.org/doc/handbook/mirrors.html. *default host=cvsup.au.FreeBSD.org *default base=/var/db *default prefix=/usr *default release=cvs tag=. *default delete use-rel-suffix # If you seem to be limited by CPU rather than network or disk bandwidth, try # commenting out the following line. (Normally, today's CPUs are fast enough # that you want to run compression.) *default compress ## Ports Collection. # # The easiest way to get the ports tree is to use the "ports-all" # mega-collection. It includes all of the individual "ports-*" # collections, ports-all # These are the individual collections that make up "ports-all". If you # use these, be sure to comment out "ports-all" above. # # Be sure to ALWAYS cvsup the ports-base collection if you use any of the # other individual collections below. ports-base is a mandatory collection # for the ports collection, and your ports may not build correctly if it # is not kept up to date. #ports-base #ports-accessibility #ports-arabic #ports-archivers #ports-astro #ports-audio #ports-benchmarks #ports-biology #ports-cad #ports-chinese #ports-comms #ports-converters #ports-databases #ports-deskutils #ports-devel #ports-dns #ports-editors #ports-emulators #ports-finance #ports-french #ports-ftp #ports-games #ports-german #ports-graphics #ports-hebrew #ports-hungarian #ports-irc #ports-japanese #ports-java #ports-korean #ports-lang #ports-mail #ports-math #ports-mbone #ports-misc #ports-multimedia #ports-net #ports-net-mgmt #ports-news #ports-palm #ports-picobsd #ports-polish #ports-portuguese #ports-print #ports-russian #ports-science #ports-security #ports-shells #ports-sysutils #ports-textproc #ports-ukrainian #ports-vietnamese #ports-www #ports-x11 #ports-x11-clocks #ports-x11-fm #ports-x11-fonts #ports-x11-servers #ports-x11-themes #ports-x11-toolkits #ports-x11-wm so, I am really stumped with this error. I have deleted /usr/ports/mozex/Makefile.xpi and done a fresh cvsup to no avail. This is my first message to this list so hopefully it is to the right place and that I have followed all the requirements. Thankyou in advance for your help. thanks, Tim
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY102-F3348641E09FFBCE8E7720ED54A0>