Date: Fri, 26 Jan 2001 07:52:51 -0800 (PST) From: Benjamin Ossei <ben@cahostnet.net> To: questions@freebsd.org Subject: Re: New Kernel install Message-ID: <20010126155251.5FFA536F9@sitemail.everyone.net>
next in thread | raw e-mail | index | archive | help
This is the error I get at the end. ../../dev/ppbus/ppb_1284.c:705: unterminated string or character constant ../../dev/ppbus/ppb_1284.c:702: unterminated `#if' conditional --- Benjamin Ossei <ben@cahostnet.net> > wrote: >Anyoneone else has any suggestions to my problem? I've attached the configuration file. Thanks for your help. > >--- Benjamin Ossei <ben@cahostnet.net> >> wrote: >>Part: 1 >><pre>Hi, >> >>I'm trying to compile a new kernel for my machine. I used the GENERIC configuration >>as a starting point and added what I needed and commented out what I didn't >>want. I was able to issue the command /usr/sbin/config -g "newkernel" fine >>but when I go to build the kernel with the make depend or just make I get >>a stop error. The error indicates that there's unterminited string or something >>to the effect and gives me this "#IF" for the problem. I've gone through >>my kernel config and can not see anything. I'm not very good at this I should >>also say. >> >>I'm using Freebsd 4.2-Current. This is my first custom kernel. I've attached >>the file for your viewing and hopefully you can see my problem. I included >>the options IPFIREWALL_DEFAULT_TO_ACCEPT for now to get the machine up and >>running. I'll change this to DENY once I"m done and recompile the kernel. >> >> >>Thanks for your help. >> >> >> >>_____________________________________________________________ >>========GET YOUR FREE E-MAIL============ >><A HREF="http://freemail.cahostnet.net" target="_new">http://freemail.cahostnet.net</A>; >>Web Hosting <A HREF="http://www.cahostnet.com" target="_new">http://www.cahostnet.com</A>; >></pre>Part: 2 >><pre># >># GENERIC -- Generic kernel configuration file for FreeBSD/i386 >># >># For more information on this file, please read the handbook section on >># Kernel Configuration Files: >># >># <A HREF="http://www.FreeBSD.org/handbook/kernelconfig-config.html" target="_new">http://www.FreeBSD.org/handbook/kernelconfig-config.html</A>; >># >># The handbook is also available locally in /usr/share/doc/handbook >># if you've installed the doc distribution, otherwise always see the >># FreeBSD World Wide Web server (<A HREF="http://www.FreeBSD.org/)" target="_new">http://www.FreeBSD.org/)</A>; for the >># latest information. >># >># An exhaustive list of options and more detailed explanations of the >># device lines is also present in the ./LINT configuration file. If you >>are >># in doubt as to the purpose or necessity of a line, check first in LINT. >># >># $FreeBSD: src/sys/i386/conf/FWKERNEL,v 1 2001/01/25 22:45 Ben Ossei Exp >>$ >> >>machine i386 >>cpu I386_CPU >>cpu I486_CPU >>cpu I586_CPU >>cpu I686_CPU >>ident FWKERNEL >>maxusers 64 >> >># makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols >> >># options MATH_EMULATE #Support for x87 emulation >>options INET #InterNETworking >>options INET6 #IPv6 communications protocols >>options FFS #Berkeley Fast Filesystem >>options FFS_ROOT #FFS usable as root device [keep this!] >>options SOFTUPDATES #Enable FFS soft updates support >>options MFS #Memory Filesystem >>options MD_ROOT #MD is a potential root device >># options NFS #Network Filesystem >># options NFS_ROOT #NFS usable as root device, NFS required >># options MSDOSFS #MSDOS Filesystem >>options CD9660 #ISO 9660 Filesystem >>options CD9660_ROOT #CD-ROM usable as root, CD9660 required >>options PROCFS #Process filesystem >>options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] >>options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI >># options UCONSOLE #Allow users to grab the console >>options USERCONFIG #boot -c editor >>options VISUAL_USERCONFIG #visual boot -c editor >>options KTRACE #ktrace(1) support >>options SYSVSHM #SYSV-style shared memory >>options SYSVMSG #SYSV-style message queues >>options SYSVSEM #SYSV-style semaphores >>options P1003_1B #Posix P1003_1B real-time extensions >>options _KPOSIX_PRIORITY_SCHEDULING >>options ICMP_BANDLIM #Rate limit bad replies >>options KBD_INSTALL_CDEV #install a CDEV entry in /dev >>options IPFIREWALL >>options IPFIREWALL_VERBOSE >>options IPDIVERT >>options IPFIREWALL_DEFAULT_TO_ACCEPT >>options IPFIREWALL_VERBOSE_LIMIT=100 >>options IPFILTER >>options IPFILTER_LOG >> >># To make an SMP kernel, the >>next two are needed >>options SMP # Symmetric MultiProcessor Kernel >>options APIC_IO # Symmetric (APIC) I/O >> >>device isa >>device eisa >>device pci >> >># Floppy drives >>device fdc0 at isa? port IO_FD1 irq 6 drq 2 >>device fd0 at fdc0 drive 0 >># device fd1 at fdc0 drive 1 >> >># ATA and ATAPI devices >>device ata0 at isa? port IO_WD1 irq 14 >>device ata1 at isa? port IO_WD2 irq 15 >>device ata >>device atadisk # ATA disk drives >>device atapicd # ATAPI CDROM drives >>device atapifd # ATAPI floppy drives >>device atapist # ATAPI tape drives >>options ATA_STATIC_ID #Static device numbering >># options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices >> >># SCSI Controllers >># device ahb # EISA AHA1742 family >># device ahc # AHA2940 and onboard AIC7xxx devices >># device amd # AMD 53C974 (Teckram DC-390(T)) >># device isp # Qlogic family >># device ncr # NCR/Symbios Logic >># device sym # NCR/Symbios Logic (newer chipsets) >># options SYM_SETUP_LP_PROBE_MAP=0x40 >> # Allow ncr to attach legacy NCR devices when >> # both sym and ncr >>are configured >> >># device adv0 at isa? >># device adw >># device bt0 at isa? >># device aha0 at isa? >># device aic0 at isa? >> >># device ncv # NCR 53C500 >># device nsp # Workbit Ninja SCSI-3 >># device stg # TMC 18C30/18C50 >> >># SCSI peripherals >># device scbus # SCSI bus (required) >># device da # Direct Access (disks) >># device sa # Sequential Access (tape etc) >># device cd # CD >># device pass # Passthrough device (direct SCSI access) >> >># RAID controllers interfaced to the SCSI subsystem >># device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID >># device dpt # DPT Smartcache - See LINT for options! >># device mly # Mylex AcceleRAID/eXtremeRAID >> >># RAID controllers >># device ida # Compaq Smart RAID >># device amr # AMI MegaRAID >># device mlx # Mylex DAC960 family >># device twe # 3ware Escalade >> >># atkbdc0 controls both the keyboard and the PS/2 mouse >>device atkbdc0 at isa? port IO_KBD >>device atkbd0 at atkbdc? irq 1 flags 0x1 >>device psm0 at atkbdc? irq 12 >> >>device vga0 at isa? >> >># splash screen/screen saver >>pseudo-device splash >> >># syscons is the default console driver, resembling an SCO console >>device sc0 at isa? flags 0x100 >> >># Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver >># device vt0 at isa? >># options XSERVER # support for X server on a vt console >># options FAT_CURSOR # start with block cursor >># If you have a ThinkPAD, uncomment this along with the rest of the PCVT >>lines >># options PCVT_SCANSET=2 # IBM keyboards are non-std >> >># Floating point support - do not disable. >>device npx0 at nexus? port IO_NPX irq 13 >> >># Power management support (see LINT for more options) >>device apm0 at nexus? disable flags 0x20 # Advanced Power Management >> >># PCCARD (PCMCIA) support >># device card >># device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 >># device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable >> >># Serial (COM) ports >>device sio0 at isa? port IO_COM1 flags 0x10 irq 4 >>device sio1 at isa? port IO_COM2 irq 3 >>device sio2 at isa? disable port IO_COM3 irq 5 >>device sio3 at isa? disable port IO_COM4 irq 9 >> >># Parallel port >>device ppc0 at isa? irq 7 >>device ppbus # Parallel port bus (required) >>device lpt # Printer >># device plip # TCP/IP over parallel >>device ppi # Parallel port interface device >># device vpo # Requires scbus and da >> >> >># PCI Ethernet NICs. >># device de # DEC/Intel DC21x4x (``Tulip'') >>device fxp # Intel EtherExpress PRO/100B (82557, 82558) >># device tx # SMC 9432TX (83c170 ``EPIC'') >>device vx # 3Com 3c590, 3c595 (``Vortex'') >># device wx # Intel Gigabit Ethernet Card (``Wiseman'') >> >># PCI Ethernet NICs that use the common MII bus controller code. >># NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! >>device miibus # MII bus support >>device dc # DEC/Intel 21143 and various workalikes >># device pcn # AMD Am79C79x PCI 10/100 NICs >># device rl # RealTek 8129/8139 >># device sf # Adaptec AIC-6915 (``Starfire'') >># device sis # Silicon Integrated Systems SiS 900/SiS 7016 >># device ste # Sundance ST201 (D-Link DFE-550TX) >># device tl # Texas Instruments ThunderLAN >># device vr # VIA Rhine, Rhine II >># device wb # Winbond W89C840F >>device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') >> >># ISA Ethernet NICs. >># device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 >># device ex >># device ep >># device fe0 at isa? port 0x300 >># WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really >># exists only as a PCMCIA device, so there is no ISA attatement needed >># and resources will always be dynamically assigned by the pccard code. >># device wi >># Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will >># work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP >># mode (the factory default). If you set the switches on your ISA >># card for a manually chosen I/O address and IRQ, you must specify >># those paremeters here. >># device an >># Xircom Ethernet >># device xe >># The probe order of these is presently determined by i386/isa/isa_compat.c. >># device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 >># device le0 at isa? port 0x300 irq 5 iomem 0xd0000 >># device lnc0 at isa? port 0x280 irq 10 drq 0 >># device cs0 at isa? port 0x300 >># device sn0 at isa? port 0x300 irq 10 >> >># Pseudo devices - the number indicates how many units to allocated. >>pseudo-device loop # Network loopback >>pseudo-device ether # Ethernet support >># pseudo-device sl 1 # Kernel SLIP >># pseudo-device ppp 1 # Kernel PPP >># pseudo-device tun # Packet tunnel. >>pseudo-device pty # Pseudo-ttys (telnet etc) >>pseudo-device md # Memory "disks" >>pseudo-device gif 4 # IPv6 and IPv4 tunneling >>pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) >> >># The `bpf' pseudo-device enables the Berkeley Packet Filter. >># Be aware of the administrative consequences of enabling this! >>pseudo-device bpf #Berkeley packet filter >> >># USB support >># device uhci # UHCI PCI->USB interface >># device ohci # OHCI PCI->USB interface >>device usb # USB Bus (required) >>device ugen # Generic >>device uhid # "Human Interface Devices" >>device ukbd # Keyboard >>device ulpt # Printer >># device umass # Disks/Mass storage - Requires scbus and da >>device ums # Mouse >># device uscanner # Scanners >># USB Ethernet, requires mii >># device aue # ADMtek USB ethernet >># device cue # CATC USB ethernet >># device kue # Kawasaki LSI USB ethernet >></pre> > >_____________________________________________________________ >========GET YOUR FREE E-MAIL============ >http://freemail.cahostnet.net >Web Hosting http://www.cahostnet.com > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message _____________________________________________________________ ========GET YOUR FREE E-MAIL============ http://freemail.cahostnet.net Web Hosting http://www.cahostnet.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010126155251.5FFA536F9>