Date: Mon, 15 Jul 1996 21:15:42 -0700 (PDT) From: Doug White <dwhite@riley-net170-164.uoregon.edu> To: ben@stuyts.nl Cc: questions@freebsd.org Subject: Re: 2.1.5R: UUCP errors, no flow control? Message-ID: <Pine.BSI.3.94.960715211438.2447B-100000@gdi.uoregon.edu> In-Reply-To: <9607152248.AA15375@daneel.stuyts.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 16 Jul 1996, Ben Stuyts wrote: > First of all, I am new to FreeBSD, but am very impressed with what I've seen > so far. I have a little problem though: I am setting up a system with 2.1.5R, > and I can't get UUCP to work properly. > > There is an external modem (ZyXEL 1496E+) on cuaa1, and I am trying to > connect with another system through UUCP. Outgoing files go just fine, but > incoming files give lots of NAK's, checksum errors, etc. I do not see any > RTS/CTS flow control (I have one of those little RS232 tester on the rs232 > port), so I suspect it must be related to that. I would suspect your modem isn't set to assert hardware flow control then. Adjust your modem as necessary and see if that helps. Or your cable is incomplete; make sure to get a complete serial cable that supports hardware flow control. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.3.94.960715211438.2447B-100000>