Date: Mon, 15 Jul 1996 21:23:30 -0700 (PDT) From: Doug White <dwhite@riley-net170-164.uoregon.edu> To: Steve Emmert <steve@emmert.com> Cc: questions@FreeBSD.ORG Subject: Re: Comm port trouble in 2.1.5 install Message-ID: <Pine.BSI.3.94.960715212241.2447D-100000@gdi.uoregon.edu> In-Reply-To: <Pine.BSI.3.94.960715184357.320B-100000@free.emmert.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 15 Jul 1996, Steve Emmert wrote: > When I selected FTP install and COM 2 (/dev/cuaa1) then went to iij-ppp > the modem would not respond to "at". I then did a "show modem" and found > the device set to COM 1 (/dev/cuaa0). No amount of hacking with the option > selections or "set device" in iij-ppp would work to get the modem on-line > even when "show modem" displayed /dev/cuaa1. I took the disk back home and > tried it on my system with the same results. I even FTP'ed a new boot.flp > but nothing seems to work. My old 2.1 boot floppy works but a 2.2 -SNAP > boot floppy fails too. > > Any ideas?? Make sure sio0 is being probed. I just changed that option on my 2.1.5 installed machine, no problems. Did you check baudrate and data bits also? Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.3.94.960715212241.2447D-100000>