Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 27 Nov 1998 08:22:01 +0100
From:      Andreas Klemm <andreas@klemm.gtn.com>
To:        scsi@FreeBSD.ORG
Subject:   some timestamps in CAM for syslog missing, is it possible ?
Message-ID:  <19981127082201.A2134@klemm.gtn.com>

next in thread | raw e-mail | index | archive | help
Hi !

I inserted a new tape into my TDC4222 device.
It lasts some seconds, 'til the device has loaded the QIC
tape ... I immediately typed in mt retension, and this
command seemed to timeout ... 

Messages:

(sa0:ahc0:0:4:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0
SEQADDR == 0xb
SSTAT1 == 0xa
(sa0:ahc0:0:4:0): Queuing a BDR SCB
(sa0:ahc0:0:4:0): Bus Device Reset Message Sent
(sa0:ahc0:0:4:0): no longer in timeout, status = 34b
ahc0: Bus Device Reset on A:4. 1 SCBs aborted
(sa0:ahc0:0:4:0): LOAD UNLOAD. CDB: 1b 0 0 0 3 0 
(sa0:ahc0:0:4:0): UNIT ATTENTION asc:29,0
(sa0:ahc0:0:4:0): Power on, reset, or bus device reset occurred
(sa0:ahc0:0:4:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0
SEQADDR == 0x8
SSTAT1 == 0xa
(sa0:ahc0:0:4:0): Queuing a BDR SCB
(sa0:ahc0:0:4:0): Bus Device Reset Message Sent
(sa0:ahc0:0:4:0): no longer in timeout, status = 34b
ahc0: Bus Device Reset on A:4. 1 SCBs aborted

After that I repeated the command ... in the middle of retensioning
I got ...

(sa0:ahc0:0:4:0): LOAD UNLOAD. CDB: 1b 0 0 0 3 0 
(sa0:ahc0:0:4:0): UNIT ATTENTION asc:29,0
(sa0:ahc0:0:4:0): Power on, reset, or bus device reset occurred

Well, it's difficult to exactly determine, which message belongs
to which action I did on the command line. Is it possible to
display timestamps as well ?

	Andreas ///

-- 
Andreas Klemm                                http://www.FreeBSD.ORG/~andreas
     What gives you 90% more speed, for example, in kernel compilation ?
          http://www.FreeBSD.ORG/~fsmp/SMP/akgraph-a/graph1.html
             "NT = Not Today" (Maggie Biggs)      ``powered by FreeBSD SMP''

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19981127082201.A2134>