Date: Sat, 20 Aug 2005 18:10:31 +0200 From: Dylan Wylie <d.wylie@wylie.nl> To: Kirill Ponomarew <krion@voodoo.oberon.net> Cc: freebsd-mobile@FreeBSD.org Subject: Re: HP nx9005 and Netgear WG511T Message-ID: <20050820181031.5gg7nbr9y1c804s8@webmail.wylie.nl> In-Reply-To: <20050820151827.GE34551@voodoo.oberon.net> References: <20050820074445.GB34551@voodoo.oberon.net> <20050820074738.GC34551@voodoo.oberon.net> <43074197.5000503@wylie.nl> <20050820151827.GE34551@voodoo.oberon.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Quoting Kirill Ponomarew <krion@voodoo.oberon.net>: > Please, switch to plain text content Right. Sorry; crappy default settings. > > On Sat, Aug 20, 2005 at 04:43:35PM +0200, Dylan Wylie wrote: >> Did it work on any previous builds? My 5212 ath woks fine with a >> build from the 13th. > > I didn't try this NIC on another releases than 7 current. > >> ath0: Atheros 5212 mem 0x88000000-0x8800ffff irq 10 at device 0.0 on >> cardbus0 >> ath0: [GIANT-LOCKED] >> ath0: Ethernet address: 00:0d:54:98:a8:35 >> ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3 > >> This is a 3com CRPAG175. Why don't I see any ghz info in yours? >> Could a 'faulty' radio produce both of your error messages, I >> wonder? Isn't there a radio on/off switch somewhere? What about >> ifconfig's txpower switch or powersave? Just shoot'n. Did this >> card EVER work? > > You're able to run it on HP Compaq nx9005 ? Older compaq's; one pressario1600 and a E500 > > I'm afraid there is something more broken than ath driver. After > unplugging the card, I'm also getting on console: > > ath0: ath_reset: unable to reset hardware; hal status 3229953940 > ath0: hardware error; resetting > ath0: ath_chan_set: unable to reset channel 6 (2437 Mhz) > ath0: ath_reset: unable to reset hardware; hal status 3229953940 > ath0: detached > > -Kirill > So,what cardbus hardware for an nx9005? for presario 1600 it's: cbb0: <TI1211 PCI-CardBus Bridge> at device 10.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 I am still curious if you can get the card to work on _any_ other machine? The messages on uplugging would't realy worry me actually; it does detach eventualy. Could be wrong though. Perhaps some-one else can enlighten us on the ghz stuff: does it have any 'real' value, or is it just some hardware string? DW
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050820181031.5gg7nbr9y1c804s8>