Date: Thu, 17 Nov 2011 21:16:46 -0700 (MST) From: Warren Block <wblock@wonkity.com> To: Xihong Yin <xyin@gmx.com> Cc: FreeBSD <freebsd-questions@freebsd.org> Subject: Re: network problem on 8.2 stable Message-ID: <alpine.BSF.2.00.1111172112310.66706@wonkity.com> In-Reply-To: <alpine.BSF.2.00.1111172038390.50183@whcvgre.zlubzr.jrfgryy.pbz> References: <alpine.BSF.2.00.1111172038390.50183@whcvgre.zlubzr.jrfgryy.pbz>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 17 Nov 2011, Xihong Yin wrote: > Hi, > > I upgraded from 8.0 stable to 8.2 stable today. Now I can't connect to the > network through the network adapter. I've set DCHP and SYNCDHCP in > /etc/rc.conf and it worked in 8.0. It seems the dhclient problem. The ip > address can't be obtained. > > When I run 'dhclient em0' manually, it shows that an ip address is leased. > But actually it is not. The 'ifconfig em0' always shows an address of 0.0.0.0 > with active status. > > $dhclient em0 > DHCPREQUEST on em0 to 255.255.255.255 port 67 > DHCPACK from 192.168.3.1 > bound to 192.168.3.39 -- renewal in 43200 seconds > > But > > $ifconfig em0 > em0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC> > ether 6c:62:6d:03:16:31 > inet 0.0.0.0 netmask 0xffffff00 broadcast 255.255.255.255 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: Ethernet autoselect (10baseT/UTP <half-duplex>) > status: active > > Any help would be appreciated. The interface is down: no "UP" in the flags. What happens if you just do it manually: ifconfig em0 up
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.1111172112310.66706>