Date: Sat, 18 Feb 2006 16:06:19 GMT From: Andras Got <andrej1981@gmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: www/93531: SUN Fire X2100 support dmesg Message-ID: <200602181606.k1IG6JMY080094@www.freebsd.org> Resent-Message-ID: <200602181610.k1IGA6U0019894@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 93531
>Category: www
>Synopsis: SUN Fire X2100 support dmesg
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-www
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: doc-bug
>Submitter-Id: current-users
>Arrival-Date: Sat Feb 18 16:10:06 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator: Andras Got
>Release: FreeBSD 6.0
>Organization:
>Environment:
FreeBSD x2100.webmedia.hu 6.0-RELEASE-p4 FreeBSD 6.0-RELEASE-p4 #2: Fri Feb 17 21:03:13 CET 2006
>Description:
This should be for the AMD64 supported MB-s/systems on the freebsd website.
FreeBSD 6.0 booted and installed cleanly via network (pxeboot and nfs mounted the cd1 ISO). This is a USB _only_ machine and the keyboard was found without problem with default (1) boot option. The machine boots only from the nVidia interface, so I had to use all the NIC-s. The install was booted from nve with pxeboot, and the system was installed via FTP from the bge interface. The nve NIC starts to work then fails with timeout (bugreport sent as well), but only if the freebsd wants to handle it, otherwise it's ok. The onboard raid is fully functional to me (WD Raptors instead of the stock seagate disks). I made a bonnie test which showed imressive perfomance, but slightly hight CPU usage.
Here comes the dmesg (my custom kernel without nve and other unuseful for me):
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p4 #2: Fri Feb 17 21:03:13 CET 2006
root@x2100.chello.hu:/usr/obj/cvsup/src/sys/X2100
ACPI APIC Table: <SUNW AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Dual Core AMD Opteron(tm) Processor 175 (2211.34-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20f32 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
Hyperthreading: 2 logical CPUs
real memory = 2146304000 (2046 MB)
avail memory = 2065403904 (1969 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <SUNW AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
pci_link0: <ACPI PCI Link LNK1> on acpi0
pci_link1: <ACPI PCI Link LNK2> on acpi0
pci_link2: <ACPI PCI Link LNK3> on acpi0
pci_link3: <ACPI PCI Link LNK4> irq 5 on acpi0
pci_link4: <ACPI PCI Link LNK5> on acpi0
pci_link5: <ACPI PCI Link LUBA> irq 10 on acpi0
pci_link6: <ACPI PCI Link LUBB> on acpi0
pci_link7: <ACPI PCI Link LMAC> irq 3 on acpi0
pci_link8: <ACPI PCI Link LACI> irq 7 on acpi0
pci_link9: <ACPI PCI Link LMCI> on acpi0
pci_link10: <ACPI PCI Link LSMB> irq 5 on acpi0
pci_link11: <ACPI PCI Link LUB2> irq 11 on acpi0
pci_link12: <ACPI PCI Link LIDE> on acpi0
pci_link13: <ACPI PCI Link LSID> irq 11 on acpi0
pci_link14: <ACPI PCI Link LFID> irq 10 on acpi0
pci_link15: <ACPI PCI Link LPCA> on acpi0
pci_link16: <ACPI PCI Link APC1> irq 0 on acpi0
pci_link17: <ACPI PCI Link APC2> irq 0 on acpi0
pci_link18: <ACPI PCI Link APC3> irq 0 on acpi0
pci_link19: <ACPI PCI Link APC4> irq 0 on acpi0
pci_link20: <ACPI PCI Link APC5> irq 16 on acpi0
pci_link21: <ACPI PCI Link APCF> irq 0 on acpi0
pci_link22: <ACPI PCI Link APCG> irq 0 on acpi0
pci_link23: <ACPI PCI Link APCH> irq 0 on acpi0
pci_link24: <ACPI PCI Link APCJ> irq 0 on acpi0
pci_link25: <ACPI PCI Link APCK> irq 0 on acpi0
pci_link26: <ACPI PCI Link APCS> irq 0 on acpi0
pci_link27: <ACPI PCI Link APCL> irq 0 on acpi0
pci_link28: <ACPI PCI Link APCZ> irq 0 on acpi0
pci_link29: <ACPI PCI Link APSI> irq 0 on acpi0
pci_link30: <ACPI PCI Link APSJ> irq 0 on acpi0
pci_link31: <ACPI PCI Link APCP> irq 0 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link26: BIOS IRQ 5 for -2146033384.1.INTA is invalid
pci_link21: BIOS IRQ 10 for -2146033384.2.INTA is invalid
pci_link23: BIOS IRQ 3 for -2146033384.10.INTA is invalid
pci_link29: BIOS IRQ 11 for -2146033384.7.INTA is invalid
pci_link30: BIOS IRQ 10 for -2146033384.8.INTA is invalid
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
atapci0: <nVidia nForce4 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe800-0xe80f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce4 SATA150 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd400-0xd40f mem 0xfe02c000-0xfe02cfff irq 22 at device 7.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce4 SATA150 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc000-0xc00f mem 0xfe02b000-0xfe02bfff irq 23 at device 8.0 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci_link16: BIOS IRQ 22 for 0.7.INTA is invalid
pci_link19: BIOS IRQ 23 for 0.8.INTA is invalid
pci_link17: BIOS IRQ 21 for 0.10.INTA is invalid
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
pci0: <bridge> at device 10.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
bge0: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem 0xfdaf0000-0xfdafffff irq 19 at device 0.0 on pci4
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:e0:81:59:59:bb
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci5: <ACPI PCI bus> on pcib5
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xce000-0xcf7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
IP Filter: v4.1.8 initialized. Default = pass all, Logging = disabled
ad4: 70911MB <WDC WD740GD-00FLC0 33.08F33> at ata2-master SATA150
ad6: 70911MB <WDC WD740GD-00FLC0 33.08F33> at ata3-master SATA150
ar0: 70911MB <nVidia MediaShield RAID1> status: READY
ar0: disk0 READY (master) using ad4 at ata2-master
ar0: disk1 READY (mirror) using ad6 at ata3-master
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ar0s1a
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200602181606.k1IG6JMY080094>