Date: Wed, 17 Jul 1996 20:04:49 -0700 From: Darryl Okahata <darrylo@hpnmhjw.sr.hp.com> To: Greg Burch <gregb@qosnet.com> Cc: questions@freefall.freebsd.org Subject: Re: Triton II workaround? Message-ID: <199607180304.AA219489089@hpnmhjw.sr.hp.com> In-Reply-To: Your message of "Wed, 17 Jul 1996 17:02:15 -0000."
next in thread | raw e-mail | index | archive | help
> We get the following messages when we boot Triton-II's using FreeBSD
> 2.1.0:
> pci0:0: Intel Corporation, device=0x1250, class=bridge (host) [no driver
> assigned]
> pci0:7: Intel Corporation, device=0x7000, class=bridge (isa) [no driver
> assigned]
I just got an ASUS P55T2P4, and it works great, despite my getting
identical messages at bootup (this is with 2.1R):
pci0:0: Intel Corporation, device=0x1250, class=bridge (host) [no driver assigned]
pci0:7: Intel Corporation, device=0x7000, class=bridge (isa) [no driver assigned]
I'm using a DTC 3130B PCI SCSI controller (Symbios/NCR 815-based), which
uses interrupts (int a/irq 11), and it's performing wonderfully. Even
with a lowly Quantum Fireball 1280S, bonnie gives (the following has
been edited for clarity):
-------------------------------------------------------------------------------
bash$ time bonnie -s 256
File './Bonnie.251', size: 268435456
-------Sequential Output-------- ---Sequential Input-- --Random--
-Per Char- --Block--- -Rewrite-- -Per Char- --Block--- --Seeks---
Machine MB K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU /sec %CPU
256 4267 86.3 4393 19.2 1207 8.3 4118 77.9 4620 17.8 56.8 2.5
537.92 real 81.89 user 62.83 sys
-------------------------------------------------------------------------------
(I used a file size of 256MB because this system has 64MB RAM.) Also,
these numbers are probably a tad low, because the test file was located
on the inner tracks on the drive.
-- Darryl Okahata
Internet: darrylo@sr.hp.com
DISCLAIMER: this message is the author's personal opinion and does not
constitute the support, opinion, or policy of Hewlett-Packard, or of the
little green men that have been following him all day.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199607180304.AA219489089>