Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 23 Feb 2005 00:23:13 +0300
From:      Mike Okun <okun@amdhost.info>
To:        "Maarten Rasenberg" <m.rasenber@aict.nl>, freebsd-scsi@freebsd.org
Subject:   Re[2]: AIC-7902 ws Seagete drive problem
Message-ID:  <1844343213.20050223002313@amdhost.info>
In-Reply-To: <213762780.20050221015539@amdhost.info>
References:  <213762780.20050221015539@amdhost.info>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi,

I do not use any raid configuration but the problem described bellow
exists.

Regards,
Mike.



MR> Hi,

MR> De onbaord version of the AIC-7902 (AIC-7902W) does not
MR> support any RAID configuration. If you don't
MR> user raid everything will work fine. We will need to wait
MR> untill the AHD driver support this.

MR> Regards,

MR> Maarten  

MR> -----Oorspronkelijk bericht-----
MR> Van: owner-freebsd-scsi@freebsd.org
MR> [mailto:owner-freebsd-scsi@freebsd.org] Namens Mike Okun
MR> Verzonden: zondag 20 februari 2005 23:56
MR> Aan: freebsd-scsi@freebsd.org
MR> Onderwerp: AIC-7902 ws Seagete drive problem

MR> Hello,

MR> I have got the Supermicro X6DHP-8G (E7520) based server with
MR> onboard Adaptec AIC7902 SCSI controller
MR> and trying to install FreeBSD 5.3 on it. Into channel A two Seagete drives (ST336607LC and
MR> ST373307LC) are plugged.

MR> Installation CD boots only in safe mode, SCB timout errors
MR> appears from time to time and also
MR> reflected in dmesg.

MR> Is there the issue with ahd driver or it is the issue with Seagete disks or settings?

MR> dmesg output:

MR>  kernel boot file is /boot/kernel/kernel
MR>  mfdev=1
MR>  cmdreg=0x0106, statreg=0x0090, cachelnsz=0 (dwords) 
MR> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns),
MR> maxlat=0x00 (0 ns)
MR>  pcib0: matched entry for 0.2.INTA
MR>  pcib0: slot 2 INTA hardwired to IRQ 16
MR>  found->        vendor=0x8086, dev=0x3595, revid=0x0c
MR>  bus=0, slot=2, func=0
MR>  class=06-04-00, hdrtype=0x01, mfdev=0
MR>  cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) 
MR> lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns),
MR> maxlat=0x00 (0 ns)  intpin=a, irq=16
MR>  pcib0: matched entry for 0.4.INTA
MR>  pcib0: slot 4 INTA hardwired to IRQ 16
MR>  found->        vendor=0x8086, dev=0x3597, revid=0x0c
MR>  bus=0, slot=4, func=0
MR>  class=06-04-00, hdrtype=0x01, mfdev=0
MR>  cmdreg=0x0107, statreg=0x4018, cachelnsz=8 (dwords) 
MR> lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns),
MR> maxlat=0x00 (0 ns)  intpin=a, irq=16
MR>  pcib0: matched entry for 0.6.INTA
MR>  pcib0: slot 6 INTA hardwired to IRQ 16
MR>  found->        vendor=0x8086, dev=0x3599, revid=0x0c
MR>  bus=0, slot=6, func=0
MR>  class=06-04-00, hdrtype=0x01, mfdev=0
MR>  cmdreg=0x0107, statreg=0x4018, cachelnsz=8 (dwords) 
MR> lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns),
MR> maxlat=0x00 (0 ns)  intpin=a, irq=16
MR>  map[20]: type 4, range 32, base 00001400, size  5, enabled
MR>  pcib0: matched entry for 0.29.INTA
MR>  pcib0: slot 29 INTA hardwired to IRQ 16
MR>  found->        vendor=0x8086, dev=0x24d2, revid=0x02
MR>  bus=0, slot=29, func=0
MR>  class=0c-03-00, hdrtype=0x00, mfdev=1
MR>  cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) 
MR> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns),
MR> maxlat=0x00 (0 ns)  intpin=a, irq=16
MR>  map[20]: type 4, range 32, base 00001420, size  5, enabled
MR>  pcib0: matched entry for 0.29.INTB
MR>  pcib0: slot 29 INTB hardwired to IRQ 19
MR>  found->        vendor=0x8086, dev=0x24d4, revid=0x02
MR>  bus=0, slot=29, func=1
MR>  class=0c-03-00, hdrtype=0x00, mfdev=0
MR>  cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) 
MR> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns),
MR> maxlat=0x00 (0 ns)  intpin=b, irq=19
MR>  map[20]: type 4, range 32, base 00001440, size  5, enabled
MR>  pcib0: matched entry for 0.29.INTC
MR>  pcib0: slot 29 INTC hardwired to IRQ 18
MR>  found->        vendor=0x8086, dev=0x24d7, revid=0x02
MR>  bus=0, slot=29, func=2
MR>  class=0c-03-00, hdrtype=0x00, mfdev=0
MR>  cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) 
MR> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns),
MR> maxlat=0x00 (0 ns)  intpin=c, irq=18
MR>  map[20]: type 4, range 32, base 00001460, size  5, enabled
MR>  pcib0: matched entry for 0.29.INTA
MR>  pcib0: slot 29 INTA hardwired to IRQ 16
MR>  found->        vendor=0x8086, dev=0x24de, revid=0x02
MR>  bus=0, slot=29, func=3
MR>  class=0c-03-00, hdrtype=0x00, mfdev=0
MR>  cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) 
MR> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns),
MR> maxlat=0x00 (0 ns)  intpin=a, irq=16
MR>  map[10]: type 1, range 32, base dd000000, size 10, enabled
MR>  pcib0: matched entry for 0.29.INTD
MR>  pcib0: slot 29 INTD hardwired to IRQ 23
MR>  found->        vendor=0x8086, dev=0x24dd, revid=0x02
MR>  bus=0, slot=29, func=7
MR>  class=0c-03-20, hdrtype=0x00, mfdev=0
MR>  cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) 
MR> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns),
MR> maxlat=0x00 (0 ns)  intpin=d, irq=23  powerspec 2  supports D0 D3  current D0
MR>  found->        vendor=0x8086, dev=0x244e, revid=0xc2
MR>  bus=0, slot=30, func=0
MR>  class=06-04-00, hdrtype=0x01, mfdev=0
MR>  cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) 
MR> lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns),
MR> maxlat=0x00 (0 ns)
MR>  found->        vendor=0x8086, dev=0x24d0, revid=0x02
MR>  bus=0, slot=31, func=0
MR>  class=06-01-00, hdrtype=0x00, mfdev=1
MR>  cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) 
MR> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns),
MR> maxlat=0x00 (0 ns)
MR>  map[20]: type 4, range 32, base 000014a0, size  4, enabled
MR>  found->        vendor=0x8086, dev=0x24db, revid=0x02
MR>  bus=0, slot=31, func=1
MR>  class=01-01-8a, hdrtype=0x00, mfdev=0
MR>  cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords) 
MR> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns),
MR> maxlat=0x00 (0 ns)  intpin=a, irq=255
MR>  map[20]: type 4, range 32, base 00001100, size  5, enabled
MR>  pcib0: matched entry for 0.31.INTB
MR>  pcib0: slot 31 INTB hardwired to IRQ 17
MR>  found->        vendor=0x8086, dev=0x24d3, revid=0x02
MR>  bus=0, slot=31, func=3
MR>  class=0c-05-00, hdrtype=0x00, mfdev=0
MR>  cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) 
MR> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns),
MR> maxlat=0x00 (0 ns)  intpin=b, irq=17
MR>  pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
MR>  pcib1:   secondary bus     1
MR>  pcib1:   subordinate bus   3
MR>  pcib1:   I/O decode        0x2000-0x3fff
MR>  pcib1:   memory decode     0xdd100000-0xdd3fffff
MR>  pcib1:   prefetched decode 0xfff00000-0xfffff
MR>  pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.PEX0 - AE_NOT_FOUND
MR>  pci1: <ACPI PCI bus> on pcib1
MR>  pci1: physical bus=1
MR>  found->        vendor=0x8086, dev=0x0329, revid=0x09
MR>  bus=1, slot=0, func=0
MR>  class=06-04-00, hdrtype=0x01, mfdev=1
MR>  cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) 
MR> lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns),
MR> maxlat=0x00 (0 ns)
MR>  map[10]: type 1, range 32, base dd100000, size 12, enabled
MR>  pcib1: device (null) requested decoded memory range 0xdd100000-0xdd100fff
MR>  found->        vendor=0x8086, dev=0x0326, revid=0x09
MR>  bus=1, slot=0, func=1
MR>  class=08-00-20, hdrtype=0x00, mfdev=1
MR>  cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) 
MR> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns),
MR> maxlat=0x00 (0 ns)  powerspec 2  supports D0 D3  current D0
MR>  found->        vendor=0x8086, dev=0x032a, revid=0x09
MR>  bus=1, slot=0, func=2
MR>  class=06-04-00, hdrtype=0x01, mfdev=1
MR>  cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) 
MR> lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns),
MR> maxlat=0x00 (0 ns)
MR>  map[10]: type 1, range 32, base dd101000, size 12, enabled
MR>  pcib1: device (null) requested decoded memory range 0xdd101000-0xdd101fff
MR>  found->        vendor=0x8086, dev=0x0327, revid=0x09
MR>  bus=1, slot=0, func=3
MR>  class=08-00-20, hdrtype=0x00, mfdev=1
MR>  cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) 
MR> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns),
MR> maxlat=0x00 (0 ns)  powerspec 2  supports D0 D3  current D0
MR>  pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
MR>  pcib2:   secondary bus     2
MR>  pcib2:   subordinate bus   2
MR>  pcib2:   I/O decode        0x2000-0x2fff
MR>  pcib2:   memory decode     0xdd200000-0xdd2fffff
MR>  pcib2:   prefetched decode 0xfff00000-0xfffff
MR>  ACPI PCI link initial configuration:
MR>  pci2: <ACPI PCI bus> on pcib2
MR>  pci2: physical bus=2
MR>  map[10]: type 4, range 32, base 00002400, size  8, enabled
MR>  pcib2: device (null) requested decoded I/O range 0x2400-0x24ff
MR>  pcib1: device (null) requested decoded I/O range 0x2400-0x24ff
MR>  map[14]: type 1, range 64, base dd200000, size 13, enabled
MR>  pcib2: device (null) requested decoded memory range 0xdd200000-0xdd201fff
MR>  pcib1: device (null) requested decoded memory range 0xdd200000-0xdd201fff
MR>  map[1c]: type 4, range 32, base 00002000, size  8, enabled
MR>  pcib2: device (null) requested decoded I/O range 0x2000-0x20ff
MR>  pcib1: device (null) requested decoded I/O range 0x2000-0x20ff
MR>  pcib2: matched entry for 2.2.INTA
MR>  pcib2: slot 2 INTA hardwired to IRQ 32
MR>  found->        vendor=0x9005, dev=0x801d, revid=0x10
MR>  bus=2, slot=2, func=0
MR>  class=01-00-00, hdrtype=0x00, mfdev=1
MR>  cmdreg=0x0117, statreg=0x0430, cachelnsz=8 (dwords) 
MR> lattimer=0x40 (1920 ns), mingnt=0x28 (10000
MR> ns), maxlat=0x19 (6250 ns)  intpin=a, irq=32  powerspec 2 
MR> supports D0 D3  current D0  MSI supports
MR> 2 messages, 64 bit
MR>  map[10]: type 4, range 32, base 00002c00, size  8, enabled
MR>  pcib2: device (null) requested decoded I/O range 0x2c00-0x2cff
MR>  pcib1: device (null) requested decoded I/O range 0x2c00-0x2cff
MR>  map[14]: type 1, range 64, base dd202000, size 13, enabled
MR>  pcib2: device (null) requested decoded memory range 0xdd202000-0xdd203fff
MR>  pcib1: device (null) requested decoded memory range 0xdd202000-0xdd203fff
MR>  map[1c]: type 4, range 32, base 00002800, size  8, enabled
MR>  pcib2: device (null) requested decoded I/O range 0x2800-0x28ff
MR>  pcib1: device (null) requested decoded I/O range 0x2800-0x28ff
MR>  pcib2: matched entry for 2.2.INTB
MR>  pcib2: slot 2 INTB hardwired to IRQ 33
MR>  found->        vendor=0x9005, dev=0x801d, revid=0x10
MR>  bus=2, slot=2, func=1
MR>  class=01-00-00, hdrtype=0x00, mfdev=1
MR>  cmdreg=0x0117, statreg=0x0430, cachelnsz=8 (dwords) 
MR> lattimer=0x40 (1920 ns), mingnt=0x28 (10000
MR> ns), maxlat=0x19 (6250 ns)  intpin=b, irq=33  powerspec 2 
MR> supports D0 D3  current D0  MSI supports
MR> 2 messages, 64 bit
MR>  ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port
MR> 0x2000-0x20ff,0x2400-0x24ff mem
MR> 0xdd200000-0xdd201fff irq 32 at device 2.0 on pci2
MR>  ahd0: Defaulting to MEMIO on
MR>  ahd0: Reserved 0x2000 bytes for rid 0x14 type 3 at 0xdd200000
MR>  ahd0: Reading VPD from SEEPROM...ahd0: VPD parsing successful
MR>  ahd0: Reading SEEPROM...done.
MR>  ahd0: STPWLEVEL is on
MR>  ahd0: Manual Primary Termination
MR>  ahd0: Manual Secondary Termination
MR>  ahd0: Primary High byte termination Enabled
MR>  ahd0: Primary Low byte termination Enabled
MR>  ahd0: Secondary High byte termination Disabled
MR>  ahd0: Secondary Low byte termination Disabled
MR>  ahd0: Downloading Sequencer Program... 696 instructions downloaded
MR>  ahd0: Features 0x3c101, Bugs 0x740002, Flags 0x43f1
MR>  ahd0: [GIANT-LOCKED]
MR>  aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
MR>  ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port
MR> 0x2800-0x28ff,0x2c00-0x2cff mem
MR> 0xdd202000-0xdd203fff irq 33 at device 2.1 on pci2
MR>  ahd1: Defaulting to MEMIO on
MR>  ahd1: Reserved 0x2000 bytes for rid 0x14 type 3 at 0xdd202000
MR>  ahd1: Reading VPD from SEEPROM...ahd1: VPD parsing successful
MR>  ahd1: Reading SEEPROM...done.
MR>  ahd1: STPWLEVEL is on
MR>  ahd1: Manual Primary Termination
MR>  ahd1: Manual Secondary Termination
MR>  ahd1: Primary High byte termination Enabled
MR>  ahd1: Primary Low byte termination Enabled
MR>  ahd1: Secondary High byte termination Disabled
MR>  ahd1: Secondary Low byte termination Disabled
MR>  ahd1: Downloading Sequencer Program... 696 instructions downloaded
MR>  ahd1: Features 0x3c101, Bugs 0x740002, Flags 0x43f0
MR>  ahd1: [GIANT-LOCKED]
MR>  aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
MR>  pci1: <base peripheral, interrupt controller> at device 0.1 (no driver attached)
MR>  pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
MR>  pcib3:   secondary bus     3
MR>  pcib3:   subordinate bus   3
MR>  pcib3:   I/O decode        0x3000-0x3fff
MR>  pcib3:   memory decode     0xdd300000-0xdd3fffff
MR>  pcib3:   prefetched decode 0xfff00000-0xfffff
MR>  ACPI PCI link initial configuration:
MR>  pci3: <ACPI PCI bus> on pcib3
MR>  pci3: physical bus=3
MR>  map[10]: type 1, range 64, base dd300000, size 17, enabled
MR>  pcib3: device (null) requested decoded memory range 0xdd300000-0xdd31ffff
MR>  pcib1: device (null) requested decoded memory range 0xdd300000-0xdd31ffff
MR>  map[20]: type 4, range 32, base 00003000, size  6, enabled
MR>  pcib3: device (null) requested decoded I/O range 0x3000-0x303f
MR>  pcib1: device (null) requested decoded I/O range 0x3000-0x303f
MR>  pcib3: matched entry for 3.2.INTA
MR>  pcib3: slot 2 INTA hardwired to IRQ 54
MR>  found->        vendor=0x8086, dev=0x1079, revid=0x03
MR>  bus=3, slot=2, func=0
MR>  class=02-00-00, hdrtype=0x00, mfdev=1
MR>  cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) 
MR> lattimer=0x40 (1920 ns), mingnt=0xff (63750
MR> ns), maxlat=0x00 (0 ns)  intpin=a, irq=54  powerspec 2 
MR> supports D0 D3  current D0  MSI supports 1
MR> message, 64 bit
MR>  map[10]: type 1, range 64, base dd320000, size 17, enabled
MR>  pcib3: device (null) requested decoded memory range 0xdd320000-0xdd33ffff
MR>  pcib1: device (null) requested decoded memory range 0xdd320000-0xdd33ffff
MR>  map[20]: type 4, range 32, base 00003040, size  6, enabled
MR>  pcib3: device (null) requested decoded I/O range 0x3040-0x307f
MR>  pcib1: device (null) requested decoded I/O range 0x3040-0x307f
MR>  pcib3: matched entry for 3.2.INTB
MR>  pcib3: slot 2 INTB hardwired to IRQ 55
MR>  found->        vendor=0x8086, dev=0x1079, revid=0x03
MR>  bus=3, slot=2, func=1
MR>  class=02-00-00, hdrtype=0x00, mfdev=1
MR>  cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) 
MR> lattimer=0x40 (1920 ns), mingnt=0xff (63750
MR> ns), maxlat=0x00 (0 ns)  intpin=b, irq=55  powerspec 2 
MR> supports D0 D3  current D0  MSI supports 1
MR> message, 64 bit
MR>  em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x3000-0x303f mem
MR> 0xdd300000-0xdd31ffff irq 54 at device 2.0 on pci3
MR>  em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdd300000
MR>  em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x3000
MR>  em0: [MPSAFE]
MR>  em0: bpf attached
MR>  em0: Ethernet address: 00:30:48:2c:41:de
MR>  em0:  Speed:N/A  Duplex:N/A
MR>  em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x3040-0x307f mem
MR> 0xdd320000-0xdd33ffff irq 55 at device 2.1 on pci3
MR>  em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdd320000
MR>  em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0x3040
MR>  em1: [MPSAFE]
MR>  em1: bpf attached
MR>  em1: Ethernet address: 00:30:48:2c:41:df
MR>  em1:  Speed:N/A  Duplex:N/A
MR>  pci1: <base peripheral, interrupt controller> at device 0.3 (no driver attached)
MR>  pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
MR>  pcib4:   secondary bus     4
MR>  pcib4:   subordinate bus   4
MR>  pcib4:   I/O decode        0xf000-0xfff
MR>  pcib4:   memory decode     0xfff00000-0xfffff
MR>  pcib4:   prefetched decode 0xfff00000-0xfffff
MR>  ACPI PCI link initial configuration:
MR>  pci4: <ACPI PCI bus> on pcib4
MR>  pci4: physical bus=4
MR>  pcib5: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
MR>  pcib5:   secondary bus     5
MR>  pcib5:   subordinate bus   5
MR>  pcib5:   I/O decode        0xf000-0xfff
MR>  pcib5:   memory decode     0xfff00000-0xfffff
MR>  pcib5:   prefetched decode 0xfff00000-0xfffff
MR>  ACPI PCI link initial configuration:
MR>  pci5: <ACPI PCI bus> on pcib5
MR>  pci5: physical bus=5
MR>  uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port
MR> 0x1400-0x141f irq 16 at device 29.0 on pci0
MR>  uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1400
MR>  uhci0: [GIANT-LOCKED]
MR>  usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
MR>  usb0: USB revision 1.0
MR>  uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
MR>  uhub0: 2 ports with 2 removable, self powered
MR>  uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port
MR> 0x1420-0x143f irq 19 at device 29.1 on pci0
MR>  uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1420
MR>  uhci1: [GIANT-LOCKED]
MR>  usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
MR>  usb1: USB revision 1.0
MR>  uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
MR>  uhub1: 2 ports with 2 removable, self powered
MR>  uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port
MR> 0x1440-0x145f irq 18 at device 29.2 on pci0
MR>  uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1440
MR>  uhci2: [GIANT-LOCKED]
MR>  usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
MR>  usb2: USB revision 1.0
MR>  uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
MR>  uhub2: 2 ports with 2 removable, self powered
MR>  uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port
MR> 0x1460-0x147f irq 16 at device 29.3 on pci0
MR>  uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1460
MR>  uhci3: [GIANT-LOCKED]
MR>  usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
MR>  usb3: USB revision 1.0
MR>  uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
MR>  uhub3: 2 ports with 2 removable, self powered
MR>  ehci0: <EHCI (generic) USB 2.0 controller> mem
MR> 0xdd000000-0xdd0003ff irq 23 at device 29.7 on pci0
MR>  ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xdd000000
MR>  ehci0: [GIANT-LOCKED]
MR>  ehci_pci_attach: companion usb0
MR>  ehci_pci_attach: companion usb1
MR>  ehci_pci_attach: companion usb2
MR>  ehci_pci_attach: companion usb3
MR>  usb4: EHCI version 1.0
MR>  usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
MR>  usb4: <EHCI (generic) USB 2.0 controller> on ehci0
MR>  usb4: USB revision 2.0
MR>  uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
MR>  uhub4: 8 ports with 8 removable, self powered
MR>  pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
MR>  pcib6:   secondary bus     6
MR>  pcib6:   subordinate bus   6
MR>  pcib6:   I/O decode        0x4000-0x4fff
MR>  pcib6:   memory decode     0xdd400000-0xdeffffff
MR>  pcib6:   prefetched decode 0xfff00000-0xfffff
MR>  pcib6:   Subtractively decoded bridge.
MR>  ACPI PCI link initial configuration:
MR>  pci6: <ACPI PCI bus> on pcib6
MR>  pci6: physical bus=6
MR>  map[10]: type 1, range 32, base de000000, size 24, enabled
MR>  pcib6: device (null) requested decoded memory range 0xde000000-0xdeffffff
MR>  map[14]: type 4, range 32, base 00004000, size  8, enabled
MR>  pcib6: device (null) requested decoded I/O range 0x4000-0x40ff
MR>  map[18]: type 1, range 32, base dd400000, size 12, enabled
MR>  pcib6: device (null) requested decoded memory range 0xdd400000-0xdd400fff
MR>  pcib6: matched entry for 6.1.INTA
MR>  pcib6: slot 1 INTA hardwired to IRQ 17
MR>  found->        vendor=0x1002, dev=0x4752, revid=0x27
MR>  bus=6, slot=1, func=0
MR>  class=03-00-00, hdrtype=0x00, mfdev=0
MR>  cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
MR>  lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00
MR> (0 ns)  intpin=a, irq=17  powerspec 2
MR> supports D0 D1 D2 D3  current D0
MR>  pci6: <display, VGA> at device 1.0 (no driver attached)
MR>  isab0: <PCI-ISA bridge> at device 31.0 on pci0
MR>  isa0: <ISA bus> on isab0
MR>  atapci0: <Intel ICH5 UDMA100 controller> port
MR> 0x14a0-0x14af,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at
MR> device 31.1 on pci0
MR>  atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x14a0
MR>  ata0: channel #0 on atapci0
MR>  atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
MR>  atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
MR>  ata0: reset tp1 mask=03 ostat0=00 ostat1=00
MR>  ata0-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01
MR>  ata0-slave:  stat=0x01 err=0x01 lsb=0x01 msb=0x01
MR>  ata0: reset tp2 stat0=01 stat1=01 devices=0x0
MR>  ata0: [MPSAFE]
MR>  ata1: channel #1 on atapci0
MR>  atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
MR>  atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
MR>  ata1: reset tp1 mask=03 ostat0=51 ostat1=01
MR>  ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
MR>  ata1-slave:  stat=0x01 err=0x04 lsb=0x00 msb=0x00
MR>  ata1: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER>
MR>  ata1: [MPSAFE]
MR>  ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port
MR> 0x1100-0x111f irq 17 at device 31.3 on pci0
MR>  ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1100
MR>  ichsmb0: [GIANT-LOCKED]
MR>  smbus0: <System Management Bus> on ichsmb0
MR>  smb0: <SMBus generic I/O> on smbus0
MR>  acpi_button0: <Power Button> on acpi0
MR>  unknown: not probed (disabled)
MR>  atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
MR>  atkbd0: <AT Keyboard> irq 1 on atkbdc0
MR>  atkbd: the current kbd controller command byte 0047
MR>  atkbd: keyboard ID 0x41ab (2)
MR>  kbd0 at atkbd0
MR>  kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
MR>  atkbd0: [GIANT-LOCKED]
MR>  psm0: unable to allocate IRQ
MR>  psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
MR>  psm0: current command byte:0047
MR>  psm0: <PS/2 Mouse> irq 12 on atkbdc0
MR>  psm0: [GIANT-LOCKED]
MR>  psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
MR>  psm0: config:00000000, flags:00000008, packet size:3
MR>  psm0: syncmask:c0, syncbits:00
MR>  sio0: irq maps: 0x8001 0x8011 0x8001 0x8001
MR>  sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
MR>  sio0: type 16550A
MR>  sio1: irq maps: 0x8001 0x8009 0x8001 0x8001
MR>  sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
MR>  sio1: type 16550A
MR>  fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
MR>  fdc0: ic_type 90 part_id 73
MR>  fdc0: [MPSAFE]
MR>  fdc0: [FAST]
MR>  fd0: <1440-KB 3.5" drive> on fdc0 drive 0
MR>  unknown: not probed (disabled)
MR>  ata: ata0 already exists; skipping it
MR>  ata: ata1 already exists; skipping it
MR>  atkbdc: atkbdc0 already exists; skipping it
MR>  fdc: fdc0 already exists; skipping it
MR>  sio: sio0 already exists; skipping it
MR>  sio: sio1 already exists; skipping it
MR>  Trying Read_Port at 203
MR>  Trying Read_Port at 243
MR>  Trying Read_Port at 283
MR>  Trying Read_Port at 2c3
MR>  Trying Read_Port at 303
MR>  Trying Read_Port at 343
MR>  Trying Read_Port at 383
MR>  Trying Read_Port at 3c3
MR>  sc: sc0 already exists; skipping it
MR>  vga: vga0 already exists; skipping it
MR>  isa_probe_children: disabling PnP devices
MR>  isa_probe_children: probing non-PnP devices
MR>  orm0: <ISA Option ROMs> at iomem
MR> 0xc8000-0xc8fff,0xc0000-0xc7fff on isa0  pmtimer0 on isa0
MR>  adv0: not probed (disabled)
MR>  aha0: not probed (disabled)
MR>  aic0: not probed (disabled)
MR>  bt0: not probed (disabled)
MR>  cs0: not probed (disabled)
MR>  ed0: not probed (disabled)
MR>  fe0: not probed (disabled)
MR>  ie0: not probed (disabled)
MR>  lnc0: not probed (disabled)
MR>  pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
MR>  pcic1: not probed (disabled)
MR>  ppc0 failed to probe at irq 7 on isa0
MR>  sc0: <System console> at flags 0x100 on isa0
MR>  sc0: VGA <16 virtual consoles, flags=0x300>
MR>  sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
MR>  sio2: not probed (disabled)
MR>  sio3: not probed (disabled)
MR>  sn0: not probed (disabled)
MR>  vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
MR>  fb0: vga0, vga, type:VGA (5), flags:0x7007f
MR>  fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
MR>  fb0: init mode:24, bios mode:3, current mode:24
MR>  fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k 
MR> VGA parameters upon power-up  50 18 10 00
MR> 00 00 03 00 02 67 5f 4f 50 82 55 81  bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
MR>  b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c  3d 3e 3f 0c
MR> 00 0f 08 00 00 00 00 00 10 0e 00 ff
MR> VGA parameters in BIOS for mode 24  50 18 10 00 10 00 03 00
MR> 02 67 5f 4f 50 82 55 81  bf 1f 00 4f 0d
MR> 0e 00 00 00 00 9c 8e 8f 28 1f 96
MR>  b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c  3d 3e 3f 0c
MR> 00 0f 08 00 00 00 00 00 10 0e 00 ff
MR> EGA/VGA parameters to be used for mode 24  50 18 10 00 10 00
MR> 03 00 02 67 5f 4f 50 82 55 81  bf 1f 00
MR> 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
MR>  b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c  3d 3e 3f 0c
MR> 00 0f 08 00 00 00 00 00 10 0e 00 ff
MR>  vt0: not probed (disabled)
MR>  isa_probe_children: probing PnP devices  Device configuration finished.
MR>  Reducing kern.maxvnodes 134592 -> 100000  procfs registered 
MR> Timecounter "TSC" frequency 3400133824
MR> Hz quality -100  Timecounters tick every 10.000 msec
MR>  lo0: bpf attached
MR>  ipfw2 initialized, divert enabled, rule-based forwarding
MR> disabled, default to deny, logging
MR> disabled
MR>  ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
MR>  ata1-master: setting PIO4 on Intel ICH5 chip
MR>  ata1-master: setting UDMA33 on Intel ICH5 chip
MR>  acd0: <CD-224E/1.9A> CDROM drive at ata1 as master
MR>  acd0: read 4134KB/s (4134KB/s), 128KB buffer, UDMA33
MR>  acd0: Reads: CDR, CDRW, CDDA stream, packet
MR>  acd0: Writes:
MR>  acd0: Audio: play, 256 volume levels
MR>  acd0: Mechanism: ejectable tray, unlocked
MR>  acd0: Medium: no/blank disc
MR>  Waiting 5 seconds for SCSI devices to settle
MR>  (noperiph:ahd0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
MR>  (noperiph:ahd1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
MR>  ahd0: Selection Timeout on A:0. 0 SCBs aborted
MR>  ahd1: Selection Timeout on A:0. 0 SCBs aborted
MR>  ahd0: Selection Timeout on A:1. 0 SCBs aborted
MR>  ahd1: Selection Timeout on A:1. 0 SCBs aborted
MR>  ahd0: Selection Timeout on A:2. 0 SCBs aborted
MR>  ahd1: Selection Timeout on A:2. 0 SCBs aborted
MR>  ahd0: Selection Timeout on A:3. 0 SCBs aborted
MR>  ahd1: Selection Timeout on A:3. 0 SCBs aborted
MR>  ahd0: Selection Timeout on A:4. 0 SCBs aborted
MR>  ahd1: Selection Timeout on A:4. 0 SCBs aborted
MR>  ahd0: Selection Timeout on A:5. 0 SCBs aborted
MR>  ahd1: Selection Timeout on A:5. 0 SCBs aborted
MR>  ahd0: Selection Timeout on A:8. 0 SCBs aborted
MR>  ahd1: Selection Timeout on A:6. 0 SCBs aborted
MR>  ahd0: Selection Timeout on A:10. 0 SCBs aborted
MR>  ahd1: Selection Timeout on A:8. 0 SCBs aborted
MR>  ahd0: Selection Timeout on A:12. 0 SCBs aborted
MR>  ahd1: Selection Timeout on A:9. 0 SCBs aborted
MR>  ahd0: Selection Timeout on A:13. 0 SCBs aborted
MR>  ahd1: Selection Timeout on A:10. 0 SCBs aborted
MR>  ahd0: Selection Timeout on A:14. 0 SCBs aborted
MR>  ahd1: Selection Timeout on A:11. 0 SCBs aborted
MR>  ahd0: Selection Timeout on A:15. 0 SCBs aborted
MR>  (probe8:ahd0:0:9:0): Retrying Command
MR>  (probe10:ahd0:0:11:0): Retrying Command
MR>  (ahd0:A:9:0): Sending PPR bus_width 1, period 8, offset fe,
MR> ppr_options ff  Interrupt storm
MR> detected on "irq16: uhci0 uhci3"; throttling interrupt source
MR>  ahd1: Selection Timeout on A:12. 0 SCBs aborted
MR>  (ahd0:A:9:0): Received PPR width 1, period 8, offset
MR> 3f,options ff  Filtered to width 1, period 8,
MR> offset 3f, options ff
MR>  ahd0: target 9 using 16bit transfers
MR>  ahd0: target 9 synchronous with period = 0x8, offset = 0x3f(RDSTRM|DT|IU|RTI|QAS)
MR>  (ahd0:A:11:0): Sending PPR bus_width 1, period 8, offset fe, ppr_options ff
MR>  (ahd0:A:11:0): Received PPR width 1, period 8, offset
MR> 3f,options ff  Filtered to width 1, period 8,
MR> offset 3f, options ff
MR>  ahd0: target 11 using 16bit transfers
MR>  ahd0: target 11 synchronous with period = 0x8, offset = 0x3f(RDSTRM|DT|IU|RTI|QAS)
MR>  ahd0: Invalid Sequencer interrupt occurred.
 >>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
MR>  ahd0: Dumping Card State at program address 0x23b Mode 0x0  Card was paused  INTSTAT[0x0]
MR> SELOID[0xb] SELID[0x90] HS_MAILBOX[0x0]
MR>  INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
MR>  DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
MR>  SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
MR>  LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
MR>  SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0]
MR> SEQINTCTL[0x6]:(INTMASK1|INTMASK2)
MR>  SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x3] 
MR> KERNEL_QFREEZE_COUNT[0x3] MK_MESSAGE_SCB[0xff00]
MR> MK_MESSAGE_SCSIID[0xff]  SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
MR>  SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
MR> LQOSTAT0[0x0] LQOSTAT1[0x0]  LQOSTAT2[0x0]

MR>  SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x9 NEXTSCB 0xff80  qinstart = 39
MR> qinfifonext = 39
MR>  QINFIFO:
MR>  WAITING_TID_QUEUES:
MR>  Pending list:
MR>  Total 0
MR>  Kernel Free SCB list: 9 7 5 1 2 3 4 6 8 10 11 12 13 14 15 0 
MR> Sequencer Complete DMA-inprog list:
MR>  Sequencer Complete list:
MR>  Sequencer DMA-Up and Complete list:
MR>  Sequencer On QFreeze and Complete list:


MR>  ahd0: FIFO0 Free, LONGJMP == 0x8000, SCB 0x7
MR> 
MR> SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
MR>  SEQINTSRC[0x0] DFCNTRL[0x0]
MR> DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
MR>  SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]  SOFFCNT[0x0]
MR> MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0  HADDR = 0x00, HCNT = 0x0
MR> CCSGCTL[0x10]:(SG_CACHE_AVAIL)

MR>  ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x9
MR> 
MR> SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
MR>  SEQINTSRC[0x0] DFCNTRL[0x0]
MR> DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
MR>  SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]  SOFFCNT[0x0]
MR> MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0  HADDR = 0x00, HCNT = 0x0
MR> CCSGCTL[0x10]:(SG_CACHE_AVAIL)
MR>  LQIN: 0x8 0x0 0x0 0x7 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
MR>  ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42
MR>  ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
MR>  ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0

MR>  SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
MR>  CCSCBCTL[0x4]:(CCSCBDIR)
MR>  ahd0: REG0 == 0xece9, SINDEX = 0x10e, DINDEX = 0x118
MR>  ahd0: SCBPTR == 0x7, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff30 CDB 12 20 0 80 88 ba
MR>  STACK: 0x236 0x2 0x0 0x0 0x0 0x0 0x0 0x0  <<<<<<<<<<<<<<<<<
MR> Dump Card State Ends >>>>>>>>>>>>>>>>>>
MR>  ahd0: target 9 using 8bit transfers
MR>  ahd0: target 9 using asynchronous transfers
MR>  ahd0: target 11 using 8bit transfers
MR>  ahd0: target 11 using asynchronous transfers
MR>  ahd1: Selection Timeout on A:13. 0 SCBs aborted
MR>  ahd1: Selection Timeout on A:14. 0 SCBs aborted
MR>  ahd1: Selection Timeout on A:15. 0 SCBs aborted
MR>  (ahd0:A:9:2): Sending PPR bus_width 1, period 8, offset 3f, ppr_options ff
MR>  (ahd0:A:9:2): Received PPR width 1, period 8, offset
MR> 3f,options ff  Filtered to width 1, period 8,
MR> offset 3f, options ff
MR>  ahd0: target 9 using 16bit transfers
MR>  ahd0: target 9 synchronous with period = 0x8, offset = 0x3f(RDSTRM|DT|IU|RTI|QAS)
MR>  (probe0:ahd0:0:9:2): Request Requeued
MR>  (probe0:ahd0:0:9:2): Retrying Command
MR>  (ahd0:A:11:1): Sending PPR bus_width 1, period 8, offset 3f, ppr_options ff
MR>  (ahd0:A:11:1): Received PPR width 1, period 8, offset
MR> 3f,options ff  Filtered to width 1, period 8,
MR> offset 3f, options ff
MR>  ahd0: target 11 using 16bit transfers
MR>  ahd0: target 11 synchronous with period = 0x8, offset = 0x3f(RDSTRM|DT|IU|RTI|QAS)
MR>  (probe1:ahd0:0:11:1): Request Requeued
MR>  (probe1:ahd0:0:11:1): Retrying Command
MR>  pass0 at ahd0 bus 0 target 6 lun 0
MR>  pass0: <SUPER GEM318 0> Fixed Processor SCSI-2 device
MR>  pass0: Serial Number 1
MR>  pass0: 3.300MB/s transfers
MR>  pass1 at ahd0 bus 0 target 9 lun 0
MR>  pass1: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device
MR>  pass1: Serial Number 3JA9SY5300007516JBPE
MR>  pass1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
MR>  pass2 at ahd0 bus 0 target 11 lun 0
MR>  pass2: <SEAGATE ST373307LC 0007> Fixed Direct Access SCSI-3 device
MR>  pass2: Serial Number 3HZ0RBHT000074423ZKC
MR>  pass2: 320.000MB/s transfers (160.000MHz, offset 63, 16bit),
MR> Tagged Queueing Enabled  ses0 at ahd0
MR> bus 0 target 6 lun 0
MR>  ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 device
MR>  ses0: Serial Number 1
MR>  ses0: 3.300MB/s transfers
MR>  ses0: SAF-TE Compliant Device
MR>  Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0
MR> 0x0 0x0 0x0 0xa 0x0 0x0 0x0 0x0 0x29 0x2
MR> 0x2 0x0 0x0 0x0  Copied 18 bytes of sense data offset 12:
MR> 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 0x0
MR> 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0
MR>  (da0:ahd0:0:9:0): Retrying Command
MR>  (da1:ahd0:0:11:0): Retrying Command
MR>  da0 at ahd0 bus 0 target 9 lun 0
MR>  da0: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device
MR>  da0: Serial Number 3JA9SY5300007516JBPE
MR>  da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
MR>  da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
MR>  da1 at ahd0 bus 0 target 11 lun 0
MR>  da1: <SEAGATE ST373307LC 0007> Fixed Direct Access SCSI-3 device
MR>  da1: Serial Number 3HZ0RBHT000074423ZKC
MR>  da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
MR>  da1: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
MR>  GEOM: new disk da0
MR>  GEOM: new disk da1
MR>  SMP: AP CPU #3 Launched!
MR>  cpu3 AP:
MR>  ID: 0x07000000   VER: 0x00050014 LDR: 0x08000000 DFR: 0x0fffffff
MR>  lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
MR>  SMP: AP CPU #1 Launched!
MR>  cpu1 AP:
MR>  ID: 0x01000000   VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff
MR>  lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
MR>  SMP: AP CPU #2 Launched!
MR>  cpu2 AP:
MR>  ID: 0x06000000   VER: 0x00050014 LDR: 0x04000000 DFR: 0x0fffffff
MR>  lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
MR>  ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
MR>  ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
MR>  ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
MR>  ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
MR>  ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
MR>  ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
MR>  ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
MR>  ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
MR>  ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
MR>  ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
MR>  ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
MR>  ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
MR>  ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
MR>  ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
MR>  ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
MR>  ioapic1: routing intpin 8 (PCI IRQ 32) to cluster 0
MR>  ioapic1: routing intpin 9 (PCI IRQ 33) to cluster 0
MR>  ioapic2: routing intpin 6 (PCI IRQ 54) to cluster 0
MR>  ioapic2: routing intpin 7 (PCI IRQ 55) to cluster 0  [0]
MR> f:80 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63
MR> s:63 l:71665902  [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0
MR> l:0  [2] f:00 typ:0 s(CHS):0/0/0
MR> e(CHS):0/0/0 s:0 l:0  [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
MR>  GEOM: Configure da0s1, start 32256 length 36692941824 end 36692974079  [0] f:80 typ:165
MR> s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:143363997  [1] f:00
MR> typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
MR> [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0  [3] f:00
MR> typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
MR>  GEOM: Configure da1s1, start 32256 length 73402366464 end 73402398719
MR>  GEOM: Configure da1s1a, start 0 length 268435456 end 268435455
MR>  GEOM: Configure da1s1b, start 268435456 length 4267474944 end 4535910399
MR>  GEOM: Configure da1s1c, start 0 length 73402366464 end 73402366463
MR>  GEOM: Configure da1s1d, start 4535910400 length 268435456 end 4804345855
MR>  GEOM: Configure da1s1e, start 4804345856 length 268435456 end 5072781311
MR>  GEOM: Configure da1s1f, start 5072781312 length 68329585152
MR> end 73402366463  Mounting root from
MR> ufs:/dev/da1s1a
MR>  WARNING: / was not properly dismounted
MR>  start_init: trying /sbin/init
MR>  WARNING: /tmp was not properly dismounted
MR>  WARNING: /usr was not properly dismounted
MR>  WARNING: /var was not properly dismounted


MR>  Thanks,

MR>  Mike.


MR> _______________________________________________
MR> freebsd-scsi@freebsd.org mailing list
MR> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
MR> To unsubscribe, send any mail to
MR> "freebsd-scsi-unsubscribe@freebsd.org"




-- 
С уважением, 
Михаил Окунь
okun@amdhost.info
www.ariadnamedia.ru       0:47 22.02.2005



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1844343213.20050223002313>