Date: Wed, 6 Feb 2008 15:20:02 GMT From: WATANABE Kazuhiro <CQG00620@nifty.ne.jp> To: freebsd-multimedia@FreeBSD.org Subject: Re: kern/97535: [snd_mss] doesn't work in 6.0-RELEASE and above for Crystal soundcards Message-ID: <200802061520.m16FK2j5070411@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/97535; it has been noted by GNATS. From: WATANABE Kazuhiro <CQG00620@nifty.ne.jp> To: bug-followup@FreeBSD.org, da_master937@hotmail.com Cc: Adam Bolte <bolad03@ca.com> Subject: Re: kern/97535: [snd_mss] doesn't work in 6.0-RELEASE and above for Crystal soundcards Date: Wed, 06 Feb 2008 23:52:17 +0900 Hi. I'm not a GX1 user, but I have been using the following soundcards with the snd_mss(4) driver since FreeBSD 5.x. They works fine. * AOpen AW37/Pro (CX4235, PnP, pcm2) on ABIT BH6 > uname -a FreeBSD scorpio.sign.local 8.0-CURRENT FreeBSD 8.0-CURRENT #0: Tue Feb 5 03:26:18 JST 2008 nabe@capricorn:/FreeBSD/obj/i386/HEAD/FreeBSD/HEAD/src/sys/GENERIC i386 > cat /dev/sndstat FreeBSD Audio Driver (newpcm: 32bit 2007061600/i386) Installed devices: pcm0: <Avance Logic ALS4000> at io 0xe400 irq 9 kld snd_als4000 [MPSAFE] (1p:1v/1r:1v channels duplex default) pcm1: <SB16 DSP 4.13> at io 0x240 irq 5 drq 1:5 bufsz 4096 kld snd_sb16 [GIANT] (1p:1v/1r:1v channels duplex) pcm2: <CS423x> at io 0x534 irq 10 drq 3:0 bufsz 4096 [GIANT] (1p:1v/1r:1v channels duplex) * NEC PC-9821Xa9 on-board sound (CS4231A, non-PnP, pcm0) > uname -a FreeBSD aries.sign.local 8.0-CURRENT FreeBSD 8.0-CURRENT #0: Tue Feb 5 23:32:06 JST 2008 nabe@capricorn:/FreeBSD/obj/pc98/HEAD/pc98/FreeBSD/HEAD/src/sys/LEFTEYE pc98 > cat /dev/sndstat FreeBSD Audio Driver (newpcm: 32bit 2007061600/i386) Installed devices: pcm0: <CS4231A> at io 0xf40 irq 10 drq 1 bufsz 4096 [GIANT] (1p:1v/1r:1v channels default) pcm1: <SB16 DSP 4.13> at io 0x20d2 irq 12 drq 3 bufsz 4096 kld snd_sb16 [GIANT] (1p:1v/1r:1v channels) I've searched the web. It seems that OptiPlex GX1 has some problem about the on-board sound (CS4236B) under Linux. Some GX1 works with manual configulation; but others does not. I don't know what is wrong. Is the ISA Configulation Utility able to specify the sound chip's resource (IRQ, port, etc.) instead of PnP?: http://support.dell.com/support/edocs/systems/ban_gx1/en/ref_ldt/utility.htm Here is the BH6's verbose dmesg. Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #0: Tue Feb 5 03:26:18 JST 2008 nabe@capricorn:/FreeBSD/obj/i386/HEAD/FreeBSD/HEAD/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e6d000. Preloaded elf module "/boot/kernel/snd_als4000.ko" at 0xc0e6d16c. Preloaded elf module "/boot/kernel/sound.ko" at 0xc0e6d21c. Preloaded elf module "/boot/kernel/snd_mss.ko" at 0xc0e6d2c8. Preloaded elf module "/boot/kernel/snd_sb16.ko" at 0xc0e6d374. Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc0e6d424. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0e6d4d0. Calibrating clock(s) ... i8254 clock: 1193112 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 751709621 Hz CPU: Intel Pentium III (751.71-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> Instruction TLB: 4 KB pages, 4-way set associative, 32 entries Instruction TLB: 4 MB pages, fully associative, 2 entries Data TLB: 4 KB pages, 4-way set associative, 64 entries 2nd-level cache: 256 KB, 8-way set associative, 32 byte line size 1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size Data TLB: 4 MB Pages, 4-way set associative, 8 entries 1st-level data cache: 16 KB, 4-way set associative, 32 byte line size real memory = 268369920 (255 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001025000 - 0x000000000fb6dfff, 246714368 bytes (60233 pages) avail memory = 248971264 (237 MB) bios32: Found BIOS32 Service Directory header at 0xc00faf00 bios32: Entry = 0xfb380 (c00fb380) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xb3b0 pnpbios: Found PnP BIOS data at 0xc00fbfd0 pnpbios: Entry = f0000:bff8 Rev = 1.0 Other BIOS signatures found: ULE: setup cpu group 0 ULE: setup cpu 0 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1 ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> wlan_amrr: <AMRR Transmit Rate Control Algorithm> wlan: <802.11 Link Layer> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 5 2008 03:25:45) ACPI: RSDP @ 0x0xf6ec0/0x0014 (v 0 ABIT ) ACPI: RSDT @ 0x0xfff3000/0x0028 (v 1 ABIT AWRDACPI 0x42302E31 AWRD 0x00000000) ACPI: FACP @ 0x0xfff3040/0x0074 (v 1 ABIT AWRDACPI 0x42302E31 AWRD 0x00000000) ACPI: DSDT @ 0x0xfff30c0/0x1E65 (v 1 ABIT AWRDACPI 0x00001000 MSFT 0x0100000C) ACPI: FACS @ 0x0xfff0000/0x0040 npx0: INT 16 interface acpi0: <ABIT AWRDACPI> on motherboard acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xc6ffe000 pa 0x1000 pci_open(1): mode 1 addr port (0x0cf8) is 0x80005810 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIRQ -> bus 0 dev 7 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, fef0000 (3) failed ACPI timer: 0/4 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 -> 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 12 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 12 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 9 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 9 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 9 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x4010 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x4041,0x5000-0x500f on acpi0 ACPI: Found matching pin for 0.15.INTA at func 0: 12 ACPI: Found matching pin for 0.13.INTA at func 0: 9 ACPI: Found matching pin for 0.11.INTA at func 0: 9 ACPI: Found matching pin for 0.9.INTA at func 0: 9 ACPI: Found matching pin for 0.7.INTD at func 2: 9 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x7190, revid=0x03 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 26, enabled found-> vendor=0x8086, dev=0x7191, revid=0x03 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7110, revid=0x02 domain=0, bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7111, revid=0x01 domain=0, bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type I/O Port, range 32, base 0xf000, size 4, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 domain=0, bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=9 map[20]: type I/O Port, range 32, base 0xd000, size 5, enabled pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.ISA_.LNKD:0) pcib0: slot 7 INTD routed to irq 9 via \\_SB_.PCI0.ISA_.LNKD found-> vendor=0x8086, dev=0x7113, revid=0x02 domain=0, bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[90]: type I/O Port, range 32, base 0x5000, size 4, enabled found-> vendor=0x4005, dev=0x4000, revid=0x00 domain=0, bus=0, slot=9, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xd400, size 7, enabled pcib0: matched entry for 0.9.INTA (src \\_SB_.PCI0.ISA_.LNKD:0) pcib0: slot 9 INTA routed to irq 9 via \\_SB_.PCI0.ISA_.LNKD found-> vendor=0x10b7, dev=0x9200, revid=0x74 domain=0, bus=0, slot=11, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xd800, size 7, enabled map[14]: type Memory, range 32, base 0xd9000000, size 7, enabled pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.ISA_.LNKC:0) pcib0: slot 11 INTA routed to irq 9 via \\_SB_.PCI0.ISA_.LNKC found-> vendor=0x134d, dev=0x7891, revid=0x02 domain=0, bus=0, slot=13, func=0 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xdc00, size 6, enabled pcib0: matched entry for 0.13.INTA (src \\_SB_.PCI0.ISA_.LNKB:0) pcib0: slot 13 INTA routed to irq 9 via \\_SB_.PCI0.ISA_.LNKB found-> vendor=0x11c1, dev=0x0440, revid=0x01 domain=0, bus=0, slot=15, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0xfc (63000 ns), maxlat=0x0e (3500 ns) intpin=a, irq=12 powerspec 2 supports D0 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd9001000, size 8, enabled map[14]: type I/O Port, range 32, base 0xe000, size 3, enabled map[18]: type I/O Port, range 32, base 0xe400, size 8, enabled pcib0: matched entry for 0.15.INTA (src \\_SB_.PCI0.ISA_.LNKA:0) pcib0: slot 15 INTA routed to irq 12 via \\_SB_.PCI0.ISA_.LNKA agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0 hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xd0000000 agp0: allocating GATT for aperture of size 64M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xd4000000-0xd7ffffff pcib1: no prefetched decode pci1: <PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1002, dev=0x474d, revid=0x65 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=12 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd4000000, size 24, enabled pcib1: requested memory range 0xd4000000-0xd4ffffff: good map[14]: type I/O Port, range 32, base 0xc000, size 8, enabled pcib1: requested I/O range 0xc000-0xc0ff: in range map[18]: type Memory, range 32, base 0xd6000000, size 12, enabled pcib1: requested memory range 0xd6000000-0xd6000fff: good pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.ISA_.LNKA:0) pcib0: slot 1 INTA routed to irq 12 via \\_SB_.PCI0.ISA_.LNKA pcib1: slot 0 INTA is routed to irq 12 vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd4000000-0xd4ffffff,0xd6000000-0xd6000fff irq 12 at device 0.0 on pci1 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=10 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=50 stat1=10 devices=0x9<ATAPI_SLAVE,ATA_MASTER> ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=01 ostat1=00 ata1: stat0=0x25 err=0x25 lsb=0x25 msb=0x25 ata1: stat0=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x0 ata1: [MPSAFE] ata1: [ITHREAD] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd000-0xd01f irq 9 at device 7.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd000 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered pci0: <bridge> at device 7.3 (no driver attached) pcm0: <Avance Logic ALS4000> port 0xd400-0xd47f irq 9 at device 9.0 on pci0 pcm0: Reserved 0x80 bytes for rid 0x10 type 4 at 0xd400 pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: Mixer "vol": pcm0: Mixer "bass": pcm0: Mixer "treble": pcm0: Mixer "synth": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap 4000, 4000; 0xcc724000 -> 4000 pcm0: sndbuf_setmap 98000, 4000; 0xcc728000 -> 98000 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd800-0xd87f mem 0xd9000000-0xd900007f irq 9 at device 11.0 on pci0 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xd9000000 xl0: using memory mapped I/O xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> PHY 24 on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:50:04:xx:xx:xx xl0: [MPSAFE] xl0: [ITHREAD] pci0: <simple comms, generic modem> at device 13.0 (no driver attached) pci0: <simple comms> at device 15.0 (no driver attached) fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [FILTER] sio0: irq maps: 0x1 0x11 0x1 0x1 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console sio0: [FILTER] sio1: irq maps: 0x1 0x9 0x1 0x1 sio1: irq maps: 0x1 0x9 0x1 0x1 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] unknown: status reg test failed 0 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ahc_isa_probe 13: ioport 0xdc00 alloc failed ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 CSC0000: start dependent (0) CSC0000: adding dma mask 0x2 CSC0000: adding dma mask 0x9 CSC0000: adding irq mask 0x20 CSC0000: adding io range 0x534-0x537, size=0x4, align=0x4 CSC0000: adding io range 0x388-0x38b, size=0x4, align=0x8 CSC0000: adding io range 0x220-0x22f, size=0x10, align=0x20 CSC0000: start dependent (1) CSC0000: adding dma mask 0xa CSC0000: adding dma mask 0xb CSC0000: adding irq mask 0x9ea0 CSC0000: adding io range 0x534-0xfff, size=0x4, align=0x4 CSC0000: adding io range 0x388-0x38b, size=0x4, align=0x8 CSC0000: adding io range 0x220-0x26f, size=0x10, align=0x20 CSC0000: start dependent (2) CSC0000: adding dma mask 0xb CSC0000: adding irq mask 0x9ea0 CSC0000: adding io range 0x534-0xfff, size=0x4, align=0x4 CSC0000: adding io range 0x388-0x3cb, size=0x4, align=0x8 CSC0000: adding io range 0x220-0x30f, size=0x10, align=0x20 CSC0000: end dependent CSC0001: start dependent (0) CSC0001: adding io range 0x200-0x207, size=0x8, align=0x8 CSC0001: start dependent (1) CSC0001: adding io range 0x208-0x20f, size=0x8, align=0x8 CSC0001: end dependent CSC0010: adding io range 0x120-0x3af, size=0x8, align=0x8 CSC0003: start dependent (0) CSC0003: adding irq mask 0x200 CSC0003: adding io range 0x330-0x331, size=0x2, align=0x8 CSC0003: start dependent (1) CSC0003: adding irq mask 0x9e00 CSC0003: adding io range 0x330-0x361, size=0x2, align=0x8 CSC0003: start dependent (2) CSC0003: adding io range 0x330-0x3e1, size=0x2, align=0x8 CSC0003: end dependent PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc97ff,0xcc000-0xcc7ff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0067 psm0: failed to reset the aux device. bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppbus0: [MPSAFE] ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sbc0: <SoundBlaster 16> at port 0x240-0x24f irq 5 drq 1 flags 0x15 on isa0 sbc0: setting card to irq 5, drq 1, 5 sbc0: [GIANT-LOCKED] sbc0: [ITHREAD] pcm1: <SB16 DSP 4.13> on sbc0 pcm1: Mixer "vol": pcm1: Mixer "bass": pcm1: Mixer "treble": pcm1: Mixer "synth": pcm1: Mixer "pcm": pcm1: Mixer "speaker": pcm1: Mixer "line": pcm1: Mixer "mic": pcm1: Mixer "cd": pcm1: Mixer "igain": pcm1: Mixer "ogain": pcm1: Mixer "line1": pcm1: [GIANT-LOCKED] pcm1: [ITHREAD] pcm1: clone manager: deadline=750ms flags=0x8000001e pcm1: sndbuf_setmap 3000, 1000; 0xcc768000 -> 3000 pcm1: sndbuf_setmap 9c000, 1000; 0xcc769000 -> 9c000 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices pcm2: <CS423x> at port 0x534-0x537,0x388-0x38b,0x220-0x22f irq 10 drq 3,0 pnpid CSCd925 on isa0 pcm2: Mixer "synth": pcm2: Mixer "pcm": pcm2: Mixer "speaker": pcm2: Mixer "line": pcm2: Mixer "mic": pcm2: Mixer "cd": pcm2: Mixer "mix": pcm2: Mixer "igain": pcm2: [GIANT-LOCKED] pcm2: [ITHREAD] pcm2: clone manager: deadline=750ms flags=0x8000001e pcm2: sndbuf_setmap 1b000, 1000; 0xcc76f000 -> 1b000 pcm2: sndbuf_setmap 1c000, 1000; 0xcc770000 -> 1c000 unknown: <GAME> failed to probe at port 0x200-0x207 pnpid CSCd925 on isa0 unknown: <CTRL> failed to probe at port 0x120-0x127 pnpid CSCd925 on isa0 unknown: <MPU> failed to probe at port 0x330-0x331 irq 11 pnpid CSCd925 on isa0 Device configuration finished. procfs registered Timecounter "TSC" frequency 751709621 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire ad0: setting PIO4 on PIIX4 chip ad0: setting UDMA33 on PIIX4 chip ad0: 6194MB <TOSHIBA MK6411MAT J0.05 B> at ata0-master UDMA33 ad0: 12685680 sectors [13424C/15H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed acd0: setting PIO4 on PIIX4 chip acd0: <LTN301/MM06> CDROM drive at ata0 as slave acd0: read 5511KB/s (5511KB/s), 120KB buffer, PIO4 acd0: Reads: CDDA acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-ROM 120mm audio disc ATA PseudoRAID loaded WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/ad0s2a start_init: trying /sbin/init splash: image decoder found: green_saver
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200802061520.m16FK2j5070411>