Date: Sat, 3 Jun 1995 15:49:17 -0400 (EDT) From: Peter Dufault <dufault@hda.com> To: sjs1@primenet.com (Scott Story) Cc: hackers@freebsd.org Subject: Re: NCR53c400 Magoptic Problem Message-ID: <199506031949.PAA05293@hda.com> In-Reply-To: <199506031858.LAA00453@mailhost.primenet.com> from "Scott Story" at Jun 3, 95 11:58:10 am
next in thread | previous in thread | raw e-mail | index | archive | help
Scott Story writes: > > Any help or a refferal would be apprieciated. > I am trying to install freeBSD 2.0 on to a SCSI 1 Sony MagOptic drive. > (486,33 one SCSI device) > These are the messages I am getting. > Durring kernel boot: > nca1: NCR-53C400 > nca1: wating for SCSI devices to settle > nca1: "Sony SMO-C501-00 2.22" is a type 0 removeable SCSI 1 > sd0 (nca1) Direct Access > sd0 (nca1) Illegal Request ASC:24,0 invalid field in CDB > sdo could not mode sense (4), Using Fictitious Geometry, 281 (576999, 512 > byte sectors) Does this happen even if you have the formatted media installed? There is 512 or 1024 byte sector media for the SMO501. > During sysinstall > > Select Complete install > > nca1/0/0/sd0/timed out > Fatal Trap 12: page fault in kernel mode > Fault Address=0x8 > Fault Code=supervisor read, page np > install pointer=0x8:0xf0172c1b > code sequence= base 0x0, limit 0xfffff, type ox1b=DPL 0,pres 1, def 32, gran 1 > Processor eflags=interupt enabled, resume,10 PL=0 > Current Process= 1 (sysinstall) > int. mask= bio > panic=page fault Oops. Do you have a stack back trace? -- Peter Dufault Real Time Machine Control and Simulation HD Associates, Inc. Voice: 508 433 6936 dufault@hda.com Fax: 508 433 5267
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199506031949.PAA05293>