Date: Tue, 19 Nov 2002 18:39:33 +0100 From: =?ISO-8859-1?Q?Bodo_R=FCskamp?= <jordbaer@mac.com> To: firewire@freebsd.org Subject: CD/DVD via firewire Message-ID: <DD9992DC-FBE5-11D6-8B7A-0030657EC4AA@mac.com>
next in thread | raw e-mail | index | archive | help
--Apple-Mail-7--709168323
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
charset=US-ASCII;
format=flowed
Hi,
After checking the firewire connection to my iPod, I immediately took
my other firewire stuff from my G4 Cube and attached it to the
FreeBSD machine. CDs and DVDs aren't working.
Attached is the dmesg output from that devices.
--Apple-Mail-7--709168323
Content-Disposition: attachment;
filename=CD-RW.txt
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
x-unix-mode=0644;
name="CD-RW.txt"
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #0: Tue Nov 19 13:57:38 CET 2002
root@laurel.clabsms.de:/u0/FreeBSD/src/sys/compile/LAUREL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 67092480 (65520K bytes)
avail memory = 62275584 (60816K bytes)
Preloaded elf kernel "kernel" at 0xc0305000.
Preloaded elf module "if_fxp.ko" at 0xc030509c.
Preloaded elf module "miibus.ko" at 0xc030513c.
Preloaded elf module "usb.ko" at 0xc03051dc.
Preloaded elf module "firewire.ko" at 0xc0305278.
Preloaded elf module "sbp.ko" at 0xc0305318.
Pentium Pro MTRR support enabled
Using $PIR table, 8 entries at 0xc00f0e70
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xb400-0xb41f irq 9 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
pci0: <unknown card> (vendor=0x1105, dev=0x8400) at 9.0 irq 9
pcib2: <PCI to PCI bridge (vendor=3388 device=0021)> at device 10.0 on pci0
pci2: <PCI bus> on pcib2
ohci0: <NEC uPD 9210 USB controller> mem 0xe0800000-0xe0800fff irq 5 at device 8.0 on pci2
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci0
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xe0000000-0xe0000fff irq 9 at device 8.1 on pci2
usb2: OHCI version 1.0
usb2: <NEC uPD 9210 USB controller> on ohci1
usb2: USB revision 1.0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci2: <USB controller> at 8.2 irq 11
fwohci0: <Texas Instruments TSB12LV26> mem 0xde800000-0xde803fff,0xdf000000-0xdf0007ff irq 10 at device 11.0 on pci2
fwohci0: PCI bus latency was changing to 250.
cache size 8.
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: resetting OHCI...done (0)
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: Link 1394a available S400, 3 ports, maxrec 2048 bytes.
fwohci0: Enable 1394a Enhancements
fwohci0: EUI64 00:50:42:b5:00:00:4c:01
fwochi_set_intr: 1
firewire0: <IEEE1394(Firewire) bus> on fwohci0
firewire0: firewire bus attach
sbp_identify
sbp_probe
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa800-0xa83f mem 0xdd800000-0xdd8fffff,0xde000000-0xde000fff irq 10 at device 11.0 on pci0
fxp0: Ethernet address 00:02:b3:2b:9e:5d
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x1274, dev=0x1371) at 12.0 irq 11
pci0: <unknown card> (vendor=0x1131, dev=0x7146) at 13.0 irq 9
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
firewire0: BUS reset
firewire0: node_id = 0xc800ffc0, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fw_set_bus_manager: 63->0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=0
ad0: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata0-master UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-6602B> at ata1-master PIO4
bus_explore done
Mounting root from ufs:/dev/ad0s3a
firewire0: BUS reset
firewire0: node_id = 0xc800ffc1, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
fw_set_bus_manager: 63->1 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=11
firewire0: BUS reset
firewire0: txd err= 0 No stat
fw_xfer_done: pending
firewire0: node_id = 0xc800ffc1, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
fw_set_bus_manager: 1-X1 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=11
firewire0:Discover new S400 device ID:00a0de010000ca45
bus_explore done
Device SBP-II
sbp_post_explore: EUI:00a0de010000ca45 spec=1 key=1.
sbp0:0:0 LOGIN
sbp0:0:0 ordered:1 type:5 EUI:00a0de010000ca45 node:0 speed:2 maxrec:10 new!
sbp0:0:0 'YAMAHA' 'CRW2100IX' 'b00c28'
fw_attach_dev: 1 pending handlers called
sbp0:0:0 login: len 12, ID 0, cmd 0000fffff0010100, recon_hold 0
sbp0:0:0 sbp_busy_timeout
sbp0:0:0 sbp_agent_reset
sbp0:0:0 sbp_do_attach
sbp0:0:0 sbp_cam_scan_lun
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:7 stat:c orb:0000244d8
sbp0:0:0 Request aborted
sbp0:0:0 XPT_SCSI_IO: cmd: 00 00 00 00 00 00 00 00 00 00, flags: 0xc0, 6b cmd/0b data/32b sense
sbp0:0:0 SCSI status 2 sfmt 0 valid 0 key 6 code 28 qlfr 0 len 7
bus_explore done
sbp_post_explore: EUI:00a0de010000ca45 spec=1 key=1.
sbp0:0:0 sbp_abort_ocb 0x1b
sbp0:0:0 XPT_SCSI_IO: cmd: 25 00 00 00 00 00 00 00 00 00, flags: 0x40, 10b cmd/8b data/32b sense
sbp0:0:0 RECONNECT
sbp0:0:0 ordered:1 type:5 EUI:00a0de010000ca45 node:0 speed:2 maxrec:10
sbp0:0:0 'YAMAHA' 'CRW2100IX' 'b00c28'
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:1 stat:4 orb:000024740
sbp0:0:0 Access denied
reconnect failed
sbp0:0:0 LOGIN
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:1 stat:8 orb:000024874
sbp0:0:0 Resources unavailable
login failed
No ocb on the queue for target 0.
--Apple-Mail-7--709168323
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
charset=US-ASCII;
format=flowed
CD-RW.txt = Yamaha CRW 2100
--Apple-Mail-7--709168323
Content-Disposition: attachment;
filename=DVD+RW.txt
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
x-unix-mode=0644;
name="DVD+RW.txt"
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #0: Tue Nov 19 13:57:38 CET 2002
root@laurel.clabsms.de:/u0/FreeBSD/src/sys/compile/LAUREL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 67092480 (65520K bytes)
avail memory = 62275584 (60816K bytes)
Preloaded elf kernel "kernel" at 0xc0305000.
Preloaded elf module "if_fxp.ko" at 0xc030509c.
Preloaded elf module "miibus.ko" at 0xc030513c.
Preloaded elf module "usb.ko" at 0xc03051dc.
Preloaded elf module "firewire.ko" at 0xc0305278.
Preloaded elf module "sbp.ko" at 0xc0305318.
Pentium Pro MTRR support enabled
Using $PIR table, 8 entries at 0xc00f0e70
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xb400-0xb41f irq 9 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
pci0: <unknown card> (vendor=0x1105, dev=0x8400) at 9.0 irq 9
pcib2: <PCI to PCI bridge (vendor=3388 device=0021)> at device 10.0 on pci0
pci2: <PCI bus> on pcib2
ohci0: <NEC uPD 9210 USB controller> mem 0xe0800000-0xe0800fff irq 5 at device 8.0 on pci2
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci0
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xe0000000-0xe0000fff irq 9 at device 8.1 on pci2
usb2: OHCI version 1.0
usb2: <NEC uPD 9210 USB controller> on ohci1
usb2: USB revision 1.0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci2: <USB controller> at 8.2 irq 11
fwohci0: <Texas Instruments TSB12LV26> mem 0xde800000-0xde803fff,0xdf000000-0xdf0007ff irq 10 at device 11.0 on pci2
fwohci0: PCI bus latency was changing to 250.
cache size 8.
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: resetting OHCI...done (0)
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: Link 1394a available S400, 3 ports, maxrec 2048 bytes.
fwohci0: Enable 1394a Enhancements
fwohci0: EUI64 00:50:42:b5:00:00:4c:01
fwochi_set_intr: 1
firewire0: <IEEE1394(Firewire) bus> on fwohci0
firewire0: firewire bus attach
sbp_identify
sbp_probe
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa800-0xa83f mem 0xdd800000-0xdd8fffff,0xde000000-0xde000fff irq 10 at device 11.0 on pci0
fxp0: Ethernet address 00:02:b3:2b:9e:5d
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x1274, dev=0x1371) at 12.0 irq 11
pci0: <unknown card> (vendor=0x1131, dev=0x7146) at 13.0 irq 9
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
firewire0: BUS reset
firewire0: node_id = 0xc800ffc0, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fw_set_bus_manager: 63->0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=0
ad0: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata0-master UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-6602B> at ata1-master PIO4
bus_explore done
Mounting root from ufs:/dev/ad0s3a
firewire0: BUS reset
firewire0: node_id = 0x8800ffc0, non CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me)
fw_set_bus_manager: 63->0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=11
firewire0: BUS reset
firewire0: txd err= 0 No stat
fw_xfer_done: pending
firewire0: node_id = 0x8800ffc0, non CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me)
fw_set_bus_manager: 0-X0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=11
firewire0:Discover new S400 device ID:0030e0005000784f
bus_explore done
Device SBP-II
sbp_post_explore: EUI:0030e0005000784f spec=1 key=1.
sbp0:0:0 LOGIN
sbp0:0:0 ordered:1 type:5 EUI:0030e0005000784f node:1 speed:2 maxrec:5 new!
sbp0:0:0 'Shining Technology, Inc.' '(null)' '000000'
fw_attach_dev: 1 pending handlers called
sbp0:0:0 login: len 16, ID 0, cmd 0000fffff0010000, recon_hold 0
sbp0:0:0 sbp_busy_timeout
sbp0:0:0 sbp_agent_reset
sbp0:0:0 sbp_do_attach
sbp0:0:0 sbp_cam_scan_lun
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:3 stat:9 orb:0000244d8
sbp0:0:0 Function rejected
sbp0:0:0 XPT_SCSI_IO: cmd: 00 00 00 00 00 00 00 00 00 00, flags: 0xc0, 6b cmd/0b data/32b sense
sbp0:0:0 SCSI status 2 sfmt 0 valid 0 key 6 code 29 qlfr 0 len 3
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:3 stat:9 orb:00002460c
sbp0:0:0 Function rejected
sbp0:0:0 XPT_SCSI_IO: cmd: 25 00 00 00 00 00 00 00 00 00, flags: 0x40, 10b cmd/8b data/32b sense
sbp0:0:0 SCSI status 2 sfmt 0 valid 0 key 6 code 28 qlfr 0 len 3
cd0 at sbp0 bus 0 target 0 lun 0
cd0: <RICOH DVD+RW MP5125 1.06> Removable CD-ROM SCSI-0 device
cd0: 50.000MB/s transfers
cd0: cd present [305920 x 2048 byte records]
bus_explore done
sbp_post_explore: EUI:0030e0005000784f spec=1 key=1.
sbp0:0:0 RECONNECT
sbp0:0:0 ordered:1 type:5 EUI:0030e0005000784f node:1 speed:2 maxrec:5
sbp0:0:0 'Shining Technology, Inc.' '(null)' '000000'
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:1 stat:9 orb:000024874
sbp0:0:0 Function rejected
reconnect failed
sbp0:0:0 LOGIN
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:1 stat:4 orb:0000249a8
sbp0:0:0 Access denied
login failed
--Apple-Mail-7--709168323
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
charset=US-ASCII;
format=flowed
DVD+RW.txt = Ricoh MP5125
--Apple-Mail-7--709168323
Content-Disposition: attachment;
filename=DVD-RAM.txt
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
x-unix-mode=0644;
name="DVD-RAM.txt"
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #0: Tue Nov 19 13:57:38 CET 2002
root@laurel.clabsms.de:/u0/FreeBSD/src/sys/compile/LAUREL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
Preloaded elf kernel "kernel" at 0xc0305000.
Preloaded elf module "if_fxp.ko" at 0xc030509c.
Preloaded elf module "miibus.ko" at 0xc030513c.
Preloaded elf module "usb.ko" at 0xc03051dc.
Preloaded elf module "firewire.ko" at 0xc0305278.
Preloaded elf module "sbp.ko" at 0xc0305318.
Pentium Pro MTRR support enabled
Using $PIR table, 8 entries at 0xc00f0e70
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xb400-0xb41f irq 9 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
pci0: <unknown card> (vendor=0x1105, dev=0x8400) at 9.0 irq 9
pcib2: <PCI to PCI bridge (vendor=3388 device=0021)> at device 10.0 on pci0
pci2: <PCI bus> on pcib2
ohci0: <NEC uPD 9210 USB controller> mem 0xe0800000-0xe0800fff irq 5 at device 8.0 on pci2
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci0
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xe0000000-0xe0000fff irq 9 at device 8.1 on pci2
usb2: OHCI version 1.0
usb2: <NEC uPD 9210 USB controller> on ohci1
usb2: USB revision 1.0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci2: <USB controller> at 8.2 irq 11
fwohci0: <Texas Instruments TSB12LV26> mem 0xde800000-0xde803fff,0xdf000000-0xdf0007ff irq 10 at device 11.0 on pci2
fwohci0: PCI bus latency was changing to 250.
cache size 8.
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: resetting OHCI...done (0)
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: Link 1394a available S400, 3 ports, maxrec 2048 bytes.
fwohci0: Enable 1394a Enhancements
fwohci0: EUI64 00:50:42:b5:00:00:4c:01
fwochi_set_intr: 1
firewire0: <IEEE1394(Firewire) bus> on fwohci0
firewire0: firewire bus attach
sbp_identify
sbp_probe
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa800-0xa83f mem 0xdd800000-0xdd8fffff,0xde000000-0xde000fff irq 10 at device 11.0 on pci0
fxp0: Ethernet address 00:02:b3:2b:9e:5d
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x1274, dev=0x1371) at 12.0 irq 11
pci0: <unknown card> (vendor=0x1131, dev=0x7146) at 13.0 irq 9
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
firewire0: BUS reset
firewire0: node_id = 0xc800ffc0, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fw_set_bus_manager: 63->0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=0
ad0: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata0-master UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-6602B> at ata1-master PIO4
bus_explore done
Mounting root from ufs:/dev/ad0s3a
firewire0: BUS reset
firewire0: node_id = 0x8800ffc0, non CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me)
fw_set_bus_manager: 63->0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=11
firewire0: BUS reset
firewire0: txd err= 0 No stat
fw_xfer_done: pending
firewire0: node_id = 0x8800ffc0, non CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me)
fw_set_bus_manager: 0-X0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=11
firewire0:Discover new S400 device ID:0030e0005000354f
bus_explore done
Device SBP-II
sbp_post_explore: EUI:0030e0005000354f spec=1 key=1.
sbp0:0:0 LOGIN
sbp0:0:0 ordered:1 type:5 EUI:0030e0005000354f node:1 speed:2 maxrec:5 new!
sbp0:0:0 'Shining Technology, Inc. ' '(null)' '000000'
fw_attach_dev: 1 pending handlers called
sbp0:0:0 login: len 16, ID 0, cmd 0000fffff0010000, recon_hold 0
sbp0:0:0 sbp_busy_timeout
sbp0:0:0 sbp_agent_reset
sbp0:0:0 sbp_do_attach
sbp0:0:0 sbp_cam_scan_lun
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:3 stat:9 orb:0000244d8
sbp0:0:0 Function rejected
sbp0:0:0 XPT_SCSI_IO: cmd: 00 00 00 00 00 00 00 00 00 00, flags: 0xc0, 6b cmd/0b data/32b sense
sbp0:0:0 SCSI status 2 sfmt 0 valid 0 key 6 code 29 qlfr 0 len 3
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:3 stat:9 orb:00002460c
sbp0:0:0 Function rejected
sbp0:0:0 XPT_SCSI_IO: cmd: 25 00 00 00 00 00 00 00 00 00, flags: 0x40, 10b cmd/8b data/32b sense
sbp0:0:0 SCSI status 2 sfmt 0 valid 0 key 6 code 28 qlfr 0 len 3
cd0 at sbp0 bus 0 target 0 lun 0
cd0: <TOSHIBA DVD-RAM SD-W2002 1014> Removable CD-ROM SCSI-0 device
cd0: 50.000MB/s transfers
cd0: cd present [2236704 x 2048 byte records]
bus_explore done
sbp_post_explore: EUI:0030e0005000354f spec=1 key=1.
sbp0:0:0 RECONNECT
sbp0:0:0 ordered:1 type:5 EUI:0030e0005000354f node:1 speed:2 maxrec:5
sbp0:0:0 'Shining Technology, Inc. ' '(null)' '000000'
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:1 stat:9 orb:000024874
sbp0:0:0 Function rejected
reconnect failed
sbp0:0:0 LOGIN
sbp0:0:0 ORB status src:1 resp:0 dead:0 len:1 stat:4 orb:0000249a8
sbp0:0:0 Access denied
login failed
--Apple-Mail-7--709168323
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
charset=ISO-8859-1;
format=flowed
DVD-RAM.txt =3D Toshiba SD-W2002
A read process on /dev/cd0c didn't read anything and was unkillable.
; Bodo
--=20
Bodo R=FCskamp <jordbaer@mac.com>=
--Apple-Mail-7--709168323--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-firewire" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?DD9992DC-FBE5-11D6-8B7A-0030657EC4AA>