Date: Sat, 25 May 1996 15:55:13 -0600 From: George Simunovich <george@cia-g.com> To: george@cia-g.com, gibbs@freefall.freebsd.org Cc: freebsd-stable@FreeBSD.org, gmarco@masternet.it Subject: Re: Problem with Adaptec 2940UW. Message-ID: <199605252155.PAA12444@gallup.cia-g.com>
next in thread | raw e-mail | index | archive | help
Nope, I do not have the CVS tree. More than willing to get it though. I'll try to get it after mailing thing. How about some pointers on getting it and using it in case I get stuck. I have made some progress with this problem. I disabled the wide negotiation for all the devices on the internal narrow SCSI bus with SCSI-Select. I am now able to boot all the time with the new -stable kernel. It is also up and running fine, except I cann't mount, or do much after a succesful mount, any device on the narrow bus without problems and error messages. I have been able to boot off of sd1, only with the same problems of hanging during boot or hanging while running. Here is my SCSI buses in case you need to know: Internal wide SCSI bus: Seagate ST15150W - id 0, sd0 Internal narrow SCSI bus: Fujitsu 2624A - id 3, sd1 Iomega 150 Multidisk - id4, sd2 Plextor CD-ROM - id5, cd0a BTW, what happens if you connect something to the external wide bus while both internal buses are connected? The manual only says, "DO NOT DO IT!". I hope it just won't work, instead of frying things. > ^^^<= It didn't give you a number here? Yes it did. A typo, sorry. George george@cia-g.com Here are the error messages mentioned above: May 25 15:16:49 silver /kernel: cd0(ahc0:5:0): timed out in dataout phase, SCSISIGI == 0x0 May 25 15:16:52 silver /kernel: cd0(ahc0:5:0): BUS DEVICE RESET message queued. May 25 15:16:53 silver /kernel: Bus Device Reset Message Sent May 25 15:16:53 silver /kernel: cd0(ahc0:5:0): timed out in message out phase, SCSISIGI == 0xa4 May 25 15:16:53 silver /kernel: ahc0: Issued Channel A Bus Reset #1. 3 SCBs aborted May 25 15:16:53 silver /kernel: cd0(ahc0:5:0): UNIT ATTENTION asc:29,0 May 25 15:16:53 silver /kernel: cd0(ahc0:5:0): Power on, reset, or bus device reset occurred May 25 15:16:53 silver /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,0 May 25 15:16:53 silver /kernel: sd0(ahc0:0:0): Power on, reset, or bus device reset occurred field replaceable unit: 1 May 25 15:16:53 silver /kernel: , retries:3 May 25 15:17:55 silver /kernel: sd1(ahc0:3:0): UNIT ATTENTION asc:29,0 May 25 15:17:55 silver /kernel: sd1(ahc0:3:0): Power on, reset, or bus device reset occurred May 25 15:17:57 silver /kernel: , retries:2 May 25 15:18:05 silver /kernel: sd1(ahc0:3:0): timed out in dataout phase, SCSISIGI == 0x48 May 25 15:18:06 silver /kernel: sd1(ahc0:3:0): BUS DEVICE RESET message queued. May 25 15:18:08 silver /kernel: Bus Device Reset Message Sent May 25 15:18:10 silver /kernel: sd1(ahc0:3:0): Bus Device Reset delivered. 1 SCBs aborted May 25 15:18:12 silver /kernel: sd1: invalid primary partition table: no magic May 25 15:18:14 silver /kernel: sd1(ahc0:3:0): UNIT ATTENTION asc:29,0 May 25 15:18:15 silver /kernel: sd1(ahc0:3:0): Power on, reset, or bus device reset occurred May 25 15:18:15 silver /kernel: , retries:4 May 25 15:18:15 silver /kernel: sd1(ahc0:3:0): timed out in dataout phase, SCSISIGI == 0x48 May 25 15:18:15 silver /kernel: sd1(ahc0:3:0): BUS DEVICE RESET message queued. May 25 15:18:15 silver /kernel: Bus Device Reset Message Sent May 25 15:18:15 silver /kernel: sd1(ahc0:3:0): Bus Device Reset delivered. 1 SCBs aborted May 25 15:18:26 silver reboot: rebooted by root May 25 15:18:26 silver syslogd: exiting on signal 15
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199605252155.PAA12444>