Date: Mon, 05 Mar 2001 18:15:16 +0100 From: Tom Fischer <tfischer@rain.fr> To: freebsd-mobile@freebsd.org Subject: Xircom cardbus CBEM56G-100 as a modem? Message-ID: <3AA3C9A4.7E831C33@rain.fr>
next in thread | raw e-mail | index | archive | help
Hello,
I realize I'm on the cutting edge here, but I thought I'd ask anyway :-)
I have Toshiba Tecra8100 with a Xircom Cardbus Ethernet 10/100 + Modem 56 (CBEM56G-100)
card, running FreeBSD 5-CURRENT with a NEWCARD kernel.
I believe that the ethernet part works (device dc0 - I haven't actually gotten to try
it out yet because Xircom sent me the card with two modem cables and no ethernet cable).
I'd like to know if anyone has gotten the modem part of this card working yet. I
think that the system sees the card, and the card is used under COM5 in windows,
so I believe that it would also be used as sio4 under FreeBSD. I'm pretty sure that
I'm missing something in /boot/device.hints for sio4 (there is nothing for sio4 in
this file).
If I do need to add something to device.hints, what is it that I should be adding?
Any hints would be much appreciated.
Here is the output of a dmesg:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sat Mar 3 23:37:27 CET 2001
root@boognish:/usr/src/sys/compile/BOOGNEWCARD
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (597.79-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268304384 (262016K bytes)
avail memory = 257626112 (251588K bytes)
Preloaded elf kernel "kernel" at 0xc0381000.
WARNING: size of kinfo_proc (648) should be 644!!!
Pentium Pro MTRR support enabled
Using $PIR table, 10 entries at 0xc00f4ee0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfff0-0xffff at device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at 5.2 (no driver attached)
pci0: <bridge, PCI-unknown> at 5.3 (no driver attached)
pci0: <unknown> at 9.0 (no driver attached)
pccbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci0
pccbb0: PCI Memory allocated: 44000000
pci_cfgintr_unique: hard-routed to irq 11
pci_cfgintr: 0:11 INTA routed to irq 11
cardbus0: <Cardbus bus (newcard)> on pccbb0
pccard0: <16-bit PCCard bus> on pccbb0
pccbb1: <ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci0
pccbb1: PCI Memory allocated: 44001000
pci_cfgintr_unique: hard-routed to irq 11
pci_cfgintr: 0:11 INTB routed to irq 11
cardbus1: <Cardbus bus (newcard)> on pccbb1
pccard1: <16-bit PCCard bus> on pccbb1
pcm0: <Yamaha DS-1E (YMF744)> port 0xfefc-0xfeff,0xff00-0xff3f mem 0xefff8000-0xefffffff irq 11 at device 12.0 on pci0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pcic0 at port 0x3e0 iomem 0xd0000-0xd1fff irq 10 on isa0
pcic_attach: attach found no sockets
device_probe_and_attach: pcic0 attach returned 6
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0e03> can't assign resources
ad0: 5729MB <TOSHIBA MK6015MAP> [12416/15/63] at ata0-master UDMA33
acd0: CDROM <CD-224E-BA> at ata1-master using UDMA33
Mounting root from ufs:/dev/ad0s2a
pccbb0: card inserted: event=0x00000000, state=30000411
pccard0: chip_socket_enable
pccbb_pcic_socket_enable:
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: pccbb_power: CARD_VCC_5V and CARD_VPP_VCC [15]
pccbb0: pccbb_pcic_wait_ready: status 0xff
pccbb0: card type is mem
pccard0: read_cis
pccbb_pcic_mem_map window 0 bus 44002000+400+bbffe000 card addr 0
pccbb_pcic_do_mem_map window 0: 8002 8002 3ffe 44 (44002000+00000400.00001000*bbffe000)
pccbb_pcic_do_mem_map window 0: 8002 8002 7ffe 44 (44002000+00000400.00001000*bbffe000)
cis mem map ccc6c000
pccard0: CIS tuple chain:
CISTPL_DEVICE type=null speed=null
01 02 00 ff
CISTPL_DEVICE_A type=eeprom speed=150ns
17 03 43 02 ff
CISTPL_MANFID
20 04 01 01 89 05
CISTPL_FUNCID
21 02 06 00
CISTPL_VERS_1
15 39 04 01 33 43 6f 6d 20 43 6f 72 70 6f 72 61
74 69 6f 6e 00 33 43 35 38 39 00 54 50 2f 42 4e
43 20 4c 41 4e 20 43 61 72 64 20 56 65 72 2e 20
32 61 00 30 30 30 30 30 32 00 ff
CISTPL_CONFIG
1a 06 02 03 00 00 01 03
CISTPL_CFTABLE_ENTRY
1b 0f c1 01 1d 71 55 35 55 54 e0 72 5d 64 30 ff
ff
CISTPL_CFTABLE_ENTRY
1b 07 03 01 71 55 26 26 54
unhandled CISTPL 19
19 03 00 00 ff
CISTPL_NO_LINK
14 00
CISTPL_CHECKSUM addr=0 len=80 cksum=0 ok
10 05 89 ff 80 00 00
CISTPL_END
ff
pccard0: check_cis_quirks
pccard0: CIS version PCCARD 2.0 or 2.1
pccard0: CIS info: 3Com Corporation, 3C589, TP/BNC LAN Card Ver. 2a, 000002
pccard0: Manufacturer code 0x101, product 0x589
pccard0: function 0: network adapter, ccr addr 10000 mask 3
pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
pccard0: function 0, config table entry 3: I/O card; irq mask ffff; iomask 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
pccard0: functions scanning
pccbb_pcic_socket_enable:
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: pccbb_power: CARD_VCC_5V and CARD_VPP_VCC [15]
pccbb0: pccbb_pcic_wait_ready: status 0xff
pccbb0: card type is io
pccard0: ++enabled_count = 1
pccbb_pcic_mem_map window 0 bus 44002000+400+bbffe000 card addr 0
pccbb_pcic_do_mem_map window 0: 8002 8002 3ffe 44 (44002000+00000400.00001000*bbffe000)
pccard0: ccr_res == 44002000-440023ff, base=10000
pccbb_pcic_do_mem_map window 0: 8002 8002 7ffe 44 (44002000+00000400.00001000*bbffe000)
pccbb_pcic_do_mem_map window 0: 8002 8002 400e 44 (44002000+00000400.00001000*bc00e000)
pccard0: function 0 CCR at 0 offset 0: 41 0 41 0, 0 41 0 41, 0
ep0: <3Com 3c589 10Mbps Ethernet> at port 0x100-0x10f irq 11 function 0 config 1 on pccard0
pccbb_pcic_io_map window 0 auto port 100+10
pccbb_pcic_do_io_map window 0: 0100 010f (00000100+00000010)
pccbb_pcic_io_map window 0 auto port 100+10
pccbb_pcic_do_io_map window 0: 0100 010f (00000100+00000010)
ep0: Ethernet address 00:a0:24:66:3d:52
pccard0: function 0 CCR at 0 offset 0: 45 0 45 0, 0 45 0 45, 0
pccbb1: card inserted: event=0x00000000, state=30000820
pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb1: pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11]
TUPLE: LINKTARGET [3]: 43 49 53
Product version: 5.0
Product name: Xircom | CardBus Ethernet 10/100 + Modem 56 | CBEM56G | 1.03 |
TUPLE: Unknown(0x88) [4]: d4 7c a5 00
TUPLE: Unknown(0x8a) [12]: 39 30 30 31 41 54 41 35 37 43 44 34
TUPLE: Unknown(0x8b) [4]: 00 00 00 00
Manufacturer ID: 0501030181
TUPLE: DATE [4]: 13 6d 46 29
Functions: Network Adaptor, Multi-Functioned
Function Extension: 04060010a4a57cd4
Function Extension: 0102
Function Extension: 0280969800
Function Extension: 0200e1f505
Function Extension: 0301
Function Extension: 0303
Function Extension: 0501
TUPLE: DEVICE_OC [4]: 02 4f 02 ff
cardbus1: Opening BAR: type=IO, bar=10, len=0080
cardbus1: Opening BAR: type=MEM, bar=14, len=0080
cardbus1: Opening BAR: type=MEM, bar=18, len=0100
cardbus1: Invalid BAR number: 27(06)
TUPLE: CONFIG_CB [7]: 03 02 03 01 00 00 ff
TUPLE: CFTABLE_ENTRY_CB [8]: 41 b0 b0 bc 8e 0e fb 04
TUPLE: CFTABLE_ENTRY_CB [9]: 02 b8 02 b0 bc 8e 1c fb 04
TUPLE: NO_LINK [0]:
CIS reading done
dc0: <Xircom X3201 10/100BaseTX> port 0x3000-0x307f mem 0x44004000-0x44007fff,0x44003000-0x440037ff,0x44002800-0x44002fff irq 11 at device 0.0 on cardbus1
dc0: chip is in D6 power mode -- setting to D0
dc0: Ethernet address: 46:29:21:02:06:00
miibus0: <MII bus> on dc0
tdkphy0: <TDK 78Q2120 media interface> on miibus0
tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
TUPLE: LINKTARGET [3]: 43 49 53
Product version: 5.0
Product name: Xircom | CardBus Ethernet 10/100 + Modem 56 | CBEM56G | 1.03 |
TUPLE: Unknown(0x88) [4]: d4 7c a5 00
TUPLE: Unknown(0x8a) [12]: 00 00 00 00 00 00 00 00 00 00 00 00
TUPLE: Unknown(0x8b) [4]: 00 00 00 00
Manufacturer ID: 0501001081
TUPLE: DATE [4]: 13 6d 46 29
Functions: Serial Port, Multi-Functioned
Function Extension: 00020f5c
Function Extension: 0206003f1c03030f070001b5
Function Extension: 1306000b000200b5
TUPLE: DEVICE_OC [4]: 02 4f 02 ff
cardbus1: Opening BAR: type=IO, bar=10, len=0002
cardbus1: Opening BAR: type=MEM, bar=14, len=0002
cardbus1: Opening BAR: type=MEM, bar=18, len=0100
cardbus1: Invalid BAR number: 27(06)
TUPLE: CONFIG_CB [7]: 03 02 f3 00 00 00 ff
TUPLE: CFTABLE_ENTRY_CB [9]: 41 b8 02 b0 bc 8e 0e fb 04
TUPLE: CFTABLE_ENTRY_CB [8]: 02 b0 b0 bc 8e 0e fb 04
TUPLE: NO_LINK [0]:
CIS reading done
cardbus1: <unknown card> (vendor=0x115d, dev=0x0103) at 0.1 irq 0
cstsevent occures, 0x30000828
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xff80-0xff9f irq 11 at device 5.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Thanks in advance for any clues on getting this working!
regards,
tom
tfischer@rain.fr
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3AA3C9A4.7E831C33>