Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 22 Nov 2002 10:29:38 -0600
From:      "Schroeder, Aaron" <Aaron.Schroeder@qg.com>
To:        'Sergiusz Jarczyk' <sjarczyk@wist.net.pl>, freebsd-alpha@freebsd.org
Subject:   RE: Stupid mistake (AS2100A)
Message-ID:  <025596A38A894B45AFE62346A6BF47464E3228@waexch1.qgraph.com>

next in thread | raw e-mail | index | archive | help
I was able to work the FSL in a graphics window, although you might want to
try it with a serial console. Does this machine have multiple CPU's? IIRC, I
had took all the CPU's out except one and tried it from there.

I am looking for some docs that I had on this issue. We still have our
Compaq Alpha CD's laying around and I am sifting through docs to find where
I found the recovery procedures.

AJ

-----Original Message-----
From: Sergiusz Jarczyk [mailto:sjarczyk@wist.net.pl]
Sent: Friday, November 22, 2002 9:44 AM
To: freebsd-alpha@freebsd.org
Subject: Re: Stupid mistake (AS2100A)


Aaron

> Well, I had this happen to me once, I had an EV5 2100 that someone ripped
> the CPU's out of, and all I had was EV4's. What I had to do was to set a
> jumper on the main control board (the scsi, network combo board) IIRC,
it's
> JP4 that you have to set, that enables some sort of "recovery" mode which
> will allow you re-run the LFU. This worked for me, but I make no
guarantees.
>


Thank you for your reply. Unfortunately, this is 2100A RM machine, which
doesn't have separated I/O board - it's integrated with the EISA/PCI
backplane. Indeed, there is a switch called FSL Enable, but when I start the
system with this switch set, there is no difference. Do you remember if
you'd be able to work in FSL on the graphical console, or you had to attach
a terminal?

Best regards,
Sergiusz



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?025596A38A894B45AFE62346A6BF47464E3228>