Date: Sun, 13 Oct 2002 06:10:49 -0700 (PDT) From: David Wolfskill <david@catwhisker.org> To: stable@freebsd.org Subject: panic trying to boot today's -STABLE Message-ID: <200210131310.g9DDAnG1023913@bunrab.catwhisker.org>
next in thread | raw e-mail | index | archive | help
This is on my 2x876 MHz PIII build machine.
Updated sources:
freebeast(4.7-S)[6] tail /var/log/cvsup-history.log
CVSup ended from cvsup14.freebsd.org at Thu Oct 10 03:56:28 PDT 2002
CVSup begin from cvsup14.freebsd.org at Fri Oct 11 03:47:02 PDT 2002
CVSup begin from cvsup13.freebsd.org at Fri Oct 11 03:47:05 PDT 2002
CVSup ended from cvsup13.freebsd.org at Fri Oct 11 03:57:41 PDT 2002
CVSup begin from cvsup14.freebsd.org at Sat Oct 12 03:47:03 PDT 2002
CVSup begin from cvsup13.freebsd.org at Sat Oct 12 03:47:06 PDT 2002
CVSup ended from cvsup13.freebsd.org at Sat Oct 12 03:55:58 PDT 2002
CVSup begin from cvsup14.freebsd.org at Sun Oct 13 03:47:02 PDT 2002
CVSup begin from cvsup13.freebsd.org at Sun Oct 13 03:47:06 PDT 2002
CVSup ended from cvsup13.freebsd.org at Sun Oct 13 03:55:30 PDT 2002
Build process was uneventful; on reboot, I see (cut/pasted from serial
console; verbose boot is my default):
Type '?' for a list of commands, 'help' for more detailed help.
ok boot -s
SMAP type=01 base=00000000 00000000 len=00000000 0009fc00
SMAP type=01 base=00000000 0009fc00 len=00000000 00000400
SMAP type=02 base=00000000 000f0000 len=00000000 00010000
SMAP type=02 base=00000000 fec00000 len=00000000 01400000
SMAP type=01 base=00000000 00100000 len=00000000 1fef0000
SMAP type=03 base=00000000 1fff3000 len=00000000 0000d000
SMAP type=04 base=00000000 1fff0000 len=00000000 00003000
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #338: Sun Oct 13 05:21:59 PDT 2002
root@freebeast.catwhisker.org:/common/S1/obj/usr/src/sys/FREEBEAST
Calibrating clock(s) ... TSC clock: 876473534 Hz, i8254 clock: 1193293 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (876.40-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536805376 (524224K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0041a000 - 0x1ffe7fff, 532471808 bytes (129998 pages)
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
avail memory = 518299648 (506152K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
SMP: CPU0 apic_initialize():
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00faf20
bios32: Entry = 0xfb390 (c00fb390) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb3c0
pnpbios: Found PnP BIOS data at 0xc00fbde0
pnpbios: Entry = f0000:be10 Rev = 1.0
Other BIOS signatures found:
ACPI: 000f6750
Preloaded elf kernel "kernel" at 0xc03f0000.
Preloaded elf module "snd_cmi.ko" at 0xc03f00a8.
Preloaded elf module "snd_pcm.ko" at 0xc03f0148.
Pentium Pro MTRR support enabled
Creating DISK md0
md0: Malloc disk
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=30911106)
Using $PIR table, 8 entries at 0xc00fde30
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x1106, dev=0x3091, revid=0x01
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base d9000000, size 23
found-> vendor=0x1106, dev=0xb091, revid=0x00
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
IOAPIC #0 intpin 11 -> irq 2
Freeing (NOT implemented) redirected PCI irq 11.
found-> vendor=0x10ec, dev=0x8129, revid=0x00
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=2
map[10]: type 1, range 32, base 0000c000, size 7
map[14]: type 1, range 32, base d9800000, size 7
IOAPIC #0 intpin 12 -> irq 5
Freeing (NOT implemented) redirected PCI irq 12.
found-> vendor=0x13f6, dev=0x0111, revid=0x10
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base 0000c400, size 8
found-> vendor=0x1095, dev=0x0649, revid=0x02
class=01-04-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 0000c800, size 3
map[14]: type 1, range 32, base 0000cc00, size 2
map[18]: type 1, range 32, base 0000d000, size 3
map[1c]: type 1, range 32, base 0000d400, size 2
map[20]: type 1, range 32, base 0000d800, size 4
found-> vendor=0x1106, dev=0x3074, revid=0x00
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1106, dev=0x0571, revid=0x06
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000dc00, size 4
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b091)> at device 1.0 on pci0
found-> vendor=0x5333, dev=0x8a13, revid=0x02
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base d0000000, size 26
pci1: <PCI bus> on pcib1
pci1: <S3 Trio3D/2X graphics accelerator> (vendor=0x5333, dev=0x8a13) at 0.0
rl0: <RealTek 8129 10/100BaseTX> port 0xc000-0xc07f mem 0xd9800000-0xd980007f irq 2 at device 9.0 on pci0
rl0: Ethernet address: 00:80:c6:f9:08:58
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: rl0 attached
pcm0: <CMedia CMI8738> port 0xc400-0xc4ff irq 5 at device 14.0 on pci0
pcm0: sndbuf_setmap 1000, 4000; 0xd5d46000 -> 1000
pcm0: sndbuf_setmap 5000, 4000; 0xd5d4a000 -> 5000
atapci0: <CMD 649 ATA100 controller> port 0xd800-0xd80f,0xd400-0xd403,0xd000-0xd007,0xcc00-0xcc03,0xc800-0xc807 irq 10 at device 15.0 on pci0
ata-: ata2 exists, using next available unit number
ata2: iobase=0xc800 altiobase=0xcc02 bmaddr=0xd800
ata2: mask=03 ostat0=7f ostat2=7f
ata2-master: ATAPI 7f 7f
ata2-slave: ATAPI 7f 7f
ata2: mask=03 stat0=7f stat1=7f
ata2-master: ATA 7f 7f
ata2-slave: ATA 7f 7f
ata2: devices=00
ata2: at 0xc800 on atapci0
ata3: iobase=0xd000 altiobase=0xd402 bmaddr=0xd808
ata3: mask=03 ostat0=7f ostat2=7f
ata3-master: ATAPI 7f 7f
ata3-slave: ATAPI 7f 7f
ata3: mask=03 stat0=7f stat1=7f
ata3-master: ATA 7f 7f
ata3-slave: ATA 7f 7f
ata3: devices=00
ata3: at 0xd000 on atapci0
using shared irq10.
isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <VIA 8233 ATA100 controller> port 0xdc00-0xdc0f at device 17.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xdc00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci1
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xdc08
ata1: mask=03 ostat0=50 ostat2=01
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: mask=03 stat0=00 stat1=00
ata1-slave: ATA 04 a5
ata1: devices=06
ata1: at 0x170 irq 15 on atapci1
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata4 failed to probe at port 0x1f0 irq 14 on isa0
ata5 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: current command byte:0067
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, terminal emulator: sc (syscons terminal)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
isa_probe_children: probing PnP devices
SMP: enabled INTs: 2, 3, 4, 5, 6, 7, 10, 14, 15, apic_imen: 0x00ff3b03
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: sl0 attached
bpf: faith0 attached
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 6800c440, tty 630000b8, net 670000bc
ata1-slave: ATA identify retries exceeded
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
ad0: success setting UDMA5 on VIA chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <QUANTUM FIREBALLP AS40.0/A1Y.1500> ATA-5 disk at ata0-master
ad0: 39203MB (80288480 sectors), 79651 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <Compaq CRD-8322B/1.06> CDROM drive at ata1 as master
acd0: read 5500KB/s (21KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked, lock protected
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 4192964, size 4192902 : OK
ad0s2: type 0xa5, start 4192965, end = 8385929, size 4192965 : OK
ad0s3: type 0xa5, start 8385930, end = 12578894, size 4192965 : OK
ad0s4: type 0xa5, start 12578895, end = 80276804, size 67697910 : OK
start_init: trying /sbin/init
panic: relpbuf(): b_vp was probably reassignbuf()d 0xcc8d18d4 4100200
mp_lock = 01000001; cpuid = 1; lapic.id = 01000000
boot() called on cpu#1
syncing disks...
done
Uptime: 2s
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
Interrupting the boot sequence and:
Type '?' for a list of commands, 'help' for more detailed help.
ok unload
ok load /kernel.old
/kernel.old text=0x1fef53 data=0x3a254+0x2e220 syms=[0x4+0x30f10+0x4+0x377c5]
ok boot
brings up a working system:
freebeast(4.7-S)[14] uname -a
FreeBSD freebeast.catwhisker.org 4.7-STABLE FreeBSD 4.7-STABLE #337: Sat Oct 12 05:45:10 PDT 2002 root@freebeast.catwhisker.org:/common/S1/obj/usr/src/sys/FREEBEAST i386
freebeast(4.7-S)[15]
As you can see from the sequence number, this isn't exactly the first time
I've performed this exercise. :-}
I think I'll hold off on the (previously-)planned upgrade of my
production boxes to today's -STABLE, for now.
I'll prowl around in the kernel changes in the last 24 hrs. to see if I
can identify likely suspects.
Cheers,
david
--
David H. Wolfskill david@catwhisker.org
To paraphrase David Hilbert, there can be no conflicts between the
discipline of systems administration and Microsoft, since they have
nothing in common.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200210131310.g9DDAnG1023913>