Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 15 Aug 2001 19:56:29 -0500
From:      Scott Lambert <lambert@lambertfam.org>
To:        FreeBSD-Mobile@FreeBSD.org
Cc:        Warner Losh <imp@harmony.village.org>
Subject:   Re: HEADS UP: pcic pci attachments merged from current
Message-ID:  <20010815195629.A1190@laptop.lambertfam.org>

next in thread | raw e-mail | index | archive | help
I am afraid this may have broken my laptop.  I don't remember any other 
commits to PCI bus handling in the last week.  

If there were other updates, please remind me of them.  I will begin supping
back to 20010808 and try to find when the problem becomes evident.  Just
wanted to send the initial, "There may be a problem message" in case it
gives you clues sooner.

This is what is on-screen when it dies:
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7190, revid=0x03
        class=06-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[10]: type 1, range 32, base d0000000, size 28
found-> vendor=0x8086, dev=0x7191, revid=0x03
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=1        secondarybus=1
found-> vendor=0x8086, dev=0x7110, revid=0x02
        class=06-80-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
        class=01-01-80, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[20]: type 1, range 32, base 0000fff0, size  4
found-> vendor=0x8086, dev=0x7112, revid=0x01
        class=0c-03-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=d, irq=11
        map[20]: type 1, range 32, base 0000ff80, size  5
found-> vendor=0x8086, dev=0x7113, revid=0x03
        class=06-80-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0

This is my previous boot.  I have stupidly lost the kernel that gave this 
output.  I had guessed that the problem was due to my trying the SSE CPU 
option and didn't bother to backup the kernel.old file.

Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.4-PRERELEASE #13: Wed Aug  8 22:07:40 CDT 2001
    root@laptop.lambertfam.org:/usr/obj/usr/src/sys/LAPTOP
Calibrating clock(s) ... TSC clock: 646794097 Hz, i8254 clock: 1193126 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (646.83-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 335413248 (327552K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00355000 - 0x13fd7fff, 331886592 bytes (81027 pages)
avail memory = 322473984 (314916K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f04e0
bios32: Entry = 0xfe0db (c00fe0db)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf85c
pnpbios: Found PnP BIOS data at 0xc00fdf90
pnpbios: Entry = f0000:9646  Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID 7935f351
Other BIOS signatures found:
ACPI: 000f07d0
Preloaded elf kernel "kernel" at 0xc032f000.
Preloaded elf module "snd_ds1.ko" at 0xc032f09c.
Preloaded elf module "snd_pcm.ko" at 0xc032f13c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000070
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=71908086)
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1):	mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=71908086)
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found->	vendor=0x8086, dev=0x7190, revid=0x03
	class=06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[10]: type 1, range 32, base d0000000, size 28
found->	vendor=0x8086, dev=0x7191, revid=0x03
	class=06-04-00, hdrtype=0x01, mfdev=0
	subordinatebus=1 	secondarybus=1
found->	vendor=0x8086, dev=0x7110, revid=0x02
	class=06-80-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
found->	vendor=0x8086, dev=0x7111, revid=0x01
	class=01-01-80, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[20]: type 1, range 32, base 0000fff0, size  4
found->	vendor=0x8086, dev=0x7112, revid=0x01
	class=0c-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=d, irq=11
	map[20]: type 1, range 32, base 0000ff80, size  5
found->	vendor=0x8086, dev=0x7113, revid=0x03
	class=06-80-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[90]: type 1, range 32, base 00004070, size  4
found->	vendor=0x8086, dev=0x1229, revid=0x09
	class=02-00-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base effff000, size 12
	map[14]: type 1, range 32, base 0000ff40, size  6
	map[18]: type 1, range 32, base effc0000, size 17
found->	vendor=0x115d, dev=0x00d4, revid=0x00
	class=07-00-02, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 3, range 32, base 0000ff38, size  3
	map[14]: type 1, range 32, base efdff000, size 12
found->	vendor=0x1179, dev=0x0617, revid=0x20
	class=06-07-00, hdrtype=0x02, mfdev=1
	subordinatebus=14 	secondarybus=14
	intpin=a, irq=255
found->	vendor=0x1179, dev=0x0617, revid=0x20
	class=06-07-00, hdrtype=0x02, mfdev=1
	subordinatebus=15 	secondarybus=15
	intpin=b, irq=255
found->	vendor=0x1073, dev=0x0012, revid=0x00
	class=04-01-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base efdf0000, size 15
	map[14]: type 1, range 32, base 0000fec0, size  6
	map[18]: type 3, range 32, base 0000febc, size  2
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found->	vendor=0x5333, dev=0x8c12, revid=0x11
	class=03-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base f0000000, size 27
pci1: <PCI bus> on pcib1
pci1: <S3 model 8c12 graphics accelerator> (vendor=0x5333, dev=0x8c12) at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfff0-0xffff at device 5.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfff0
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-slave: ATAPI probe a=00 b=00
ata0-master: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfff8
ata1: mask=03 status0=50 status1=00
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI probe a=14 b=eb
ata1-slave: ATAPI probe a=14 b=eb
ata1: mask=03 status0=00 status1=00
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xff80-0xff9f irq 11 at device 5.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x4070-0x407f at device 5.3 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xff40-0xff7f mem 0xeffc0000-0xeffdffff,0xeffff000-0xefffffff irq 11 at device 8.0 on pci0
fxp0: using memory space register mapping
	using shared irq11.
fxp0: Ethernet address 00:10:a4:0d:8a:20
fxp0: PCI IDs: 8086 1229 8086 2411 0009
fxp0: Chip Type: 0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
pci0: <unknown card> (vendor=0x115d, dev=0x00d4) at 8.1 irq 11
pcic-pci0: <Toshiba ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci0
pcic-pci0: Legacy address set to 0x3e0
PCI Config space:
00:  06171179 04900007 06070020 00824000
10:  00000000 04800080 00141400 00000000
20:  00000000 00000000 00000000 00000000
30:  00000000 00000000 00000000 008001ff
40:  00011179 000003e1 00000000 00000000
50:  00000000 00000000 00000000 00000000
60:  00000000 00000000 00000000 00000000
70:  00000000 00000000 00000000 00000000
80:  00110001 00800000 00000000 01000000
90:  00000000 00000000 00000000 00000000
Cardbus Socket registers:
00:  f000ef6f: f000ef6f: f000e2c3: f000ef6f:
10:  f000ef6f: f000ff54: f000e142: f000ef6f:
ExCa registers:
00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03
10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe
20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e
30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13
pcic-pci1: <Toshiba ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci0
PCI Config space:
00:  06171179 04900007 06070020 00824000
10:  00000000 04800080 00151500 00000000
20:  00000000 00000000 00000000 00000000
30:  00000000 00000000 00000000 008002ff
40:  00011179 000003e1 00000000 00000000
50:  00000000 00000000 00000000 00000000
60:  00000000 00000000 00000000 00000000
70:  00000000 00000000 00000000 00000000
80:  00110001 00800000 00000000 01000000
90:  00000000 00000000 00000000 00000000
Cardbus Socket registers:
00:  f000ef6f: f000ef6f: f000e2c3: f000ef6f:
10:  f000ef6f: f000ff54: f000e142: f000ef6f:
ExCa registers:
00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03
10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe
20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e
30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13
pcm0: <Yamaha DS-1E (YMF754)> port 0xfebc-0xfebf,0xfec0-0xfeff mem 0xefdf0000-0xefdf7fff irq 11 at device 12.0 on pci0
ds1: setmap (1000, 41e4), nseg=1, error=0
pcm0: ac97 codec id 0x414b4d02 (Asahi Kasei AK4543)
pcm0: ac97 codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, AKM 3D Audio
pcm: setmap 1d000, 1000; 0xd7e3a000 -> 1d000
pcm: setmap 2d000, 1000; 0xd7e4a000 -> 2d000
pcm: setmap 3d000, 1000; 0xd7e5a000 -> 3d000
pcm: setmap 4d000, 1000; 0xd7e6a000 -> 4d000
pcm: setmap 5d000, 1000; 0xd7e7a000 -> 5d000
pcm: setmap 6d000, 1000; 0xd7e8a000 -> 6d000
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff,0xe8000-0xebfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 06 90 9c 0e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 06 90 9c 0e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0: <Intel i82365SL-A/B> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus (classic)> on pcic0
pccard1: <PC Card bus (classic)> on pcic0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: irq maps: 0x41 0x41 0x41 0x41
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: faith0 attached
bpf: lo0 attached
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ata0-master: success setting UDMA2 on Intel chip
Creating DISK ad0
ad0: <IBM-DJSA-220/JS4OAC3A> ATA-5 disk at ata0-master
ad0: 19077MB (39070080 sectors), 38760 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ad0: 19077MB <IBM-DJSA-220> [38760/16/63] at ata0-master UDMA33
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting UDMA2 on Intel chip
acd0: <TOSHIBA DVD-ROM SD-C2402/1317> DVD-ROM drive at ata1 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, UDMA33
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: 120mm data disc loaded, unlocked
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 20971439, size 20971377 : OK
start_init: trying /sbin/init
swapon: adding /dev/ad0s1b as swap device

Thu Aug  9 22:48:55 CDT 2001

-- 
Scott Lambert          KC5MLE            Unix SysAdmin -- Looking for work.
lambert@lambertfam.org       http://www.lambertfam.org/~lambert/resume.html
Two and a half years Sr. SysAdmin experience with FreeBSD in a small, 
15,000 dial-up accounts, 19,000+ e-mail accounts, ISP.
The last 5 months have included exposure to Solaris 7, True64 5, and Linux.

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010815195629.A1190>