Date: Tue, 04 Apr 2000 21:10:16 +0200 From: Jens Fallesen <jens@fallesen.dk> To: stable@freebsd.org Subject: More HP CD-RW problems Message-ID: <38EA3E18.BBD4E8CA@fallesen.dk>
next in thread | raw e-mail | index | archive | help
Hi there,
Thanks to those of you who pointed out to me how MAKEDEV actually
works.
Things are now much better, except that I cannot fixate my CDs.
When I try to burn a CD, this is what happens:
dilbert:/home/jf/cd# burncd -f /dev/acd1c -s 2 -e data v4demo.cd
fixate
next writeable LBA 0
writing from file visio2000demo.cd size 282638 KB
written this track 282638 KB (100%) total 282638 KB
fixating CD, please wait..
burncd: ioctl(CDRIOCCLOSEDISK): Input/output error
dilbert:/home/jf/cd#
The console displays this:
acd1: CLOSE_TRACK/SESSION - ILLEGAL REQUEST asc=64 ascq=00 error=04
acd1: PREVENT_ALLOW - ILLEGAL REQUEST asc=64 ascq=00 error=04
This happens no matter what speed I choose (1, 2, or 4).
My dmesg has this information about the system:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 4.0-STABLE #6: Wed Mar 22 17:11:19 CET 2000
jf@dilbert.avic.dk:/usr/src/sys/compile/DILBERT
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon (497.84-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x672 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 134217728 (131072K bytes)
avail memory = 127078400 (124100K bytes)
Preloaded elf kernel "kernel" at 0xc02fb000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02fb09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 11
pci0: <unknown card> (vendor=0x127a, dev=0x1002) at 3.0 irq 3
pcm0: <Aureal Vortex 8820> port 0x10b8-0x10bf,0x10b0-0x10b7 mem
0x41000000-0x4101ffff irq 10 at device 4.0 on pci0
pcm0: irq test failed
pcm0: codec timeout reading register 2 (fe4c00)
pcm0: codec timeout reading register 26 (fe4c00)
pcm0: ac97 codec reports dac not ready
dc0: <Intel 21143 10/100BaseTX> port 0x1000-0x107f mem
0x41400000-0x414003ff irq 11 at device 18.0 on pci0
dc0: Ethernet address: 00:50:8b:4b:69:f7
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x104c, dev=0x8009) at 19.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x10a0-0x10af at device
20.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 20.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0xee80-0xee8f
at device 20.3 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ad0: 12893MB <IBM-DTTA-351350> [26197/16/63] at ata0-master using
UDMA33
afd0: 96MB <IOMEGA ZIP 100 ATAPI> [96/64/32] at ata0-slave using PIO3
acd0: DVD-ROM <Compaq DVD-ROM DVD-113 0110> at ata1-master using PIO4
acd1: CD-RW <Hewlett-Packard CD-Writer Plus 8100> at ata1-slave using
PIO3
Mounting root from ufs:/dev/ad0s2a
Can anybody point me in the right direction here?
--
Jens Fallesen <jens@fallesen.dk> O-
Hedegaardsvej 41 st th, 2300 Copenhagen S, Denmark
Phone: (+45) 32 86 18 99 * Fax: (+45) 32 86 17 99
CCIE #5470
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38EA3E18.BBD4E8CA>