Date: Mon, 27 Mar 2000 17:46:19 +1000 From: "Haikal Saadh" <wyldephyre2@yahoo.com> To: <zeus@quakeclan.net>, <freebsd-hardware@freebsd.org> Subject: Re: IDE CDrom problems in 4.0 Message-ID: <008001bf97c0$8f79c360$5aa193cb@timberwolf> References: <00032621544900.00640@neptune.ctnet.org.au>
next in thread | previous in thread | raw e-mail | index | archive | help
I think something must be wrong in the secondary IDE drivers...I tried to install 4.0 to my Secondary dedicated harddisk (IBM 3gig) and install hangs at the newfs bit. I'll try installing it to my primary harddisk and report back.... ----- Original Message ----- From: Shaun Dwyer <zeus@quakeclan.net> To: <freebsd-hardware@freebsd.org> Sent: Sunday, March 26, 2000 11:30 PM Subject: IDE CDrom problems in 4.0 > Hi, > > I've sent an e-mail to freebsd-questions, but I havn't had a helpful response. > I thought that I could get a better response from here. > > > I recently CVSup'd to FreeBSD 4.0 from 3.4, and now my IDE cdrom dosn't work. > I have MAKEDEV'd all the devices, CVSup'd again and made world, i've built > several new kernels, and it still dosn't work. The cdrom won't even work if I > boot from the generic kernel (which i also rebuilt). > > all the IDE devices are detected properly at boot time... > ---- > atapci0: <Intel PIIX4 ATA33 controller> port 0xd800-0xd80f at device 4.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > ad0: 6187MB <FUJITSU MPB3064ATU E> [13410/15/63] at ata0-master using UDMA33 > ad1: 2014MB <WDC AC22100H> [4092/16/63] at ata0-slave using WDMA2 > acd0: CDROM <ATAPI CD-ROM DRIVE 36X MAXIMUM> at ata1-master using PIO4 > ---- > > but when I goto mount a cdrom... > ---- > neptune# mount -t cd9660 /dev/acd0c /cdrom > cd9660: Device not configured > ---- > > I have in my kernel: > ---- > options CD9660 #ISO 9660 Filesystem > # ATA and ATAPI devices > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > device atapifd # ATAPI floppy drives > device atapist # ATAPI tape drives > ---- > > > The cdrom is a master on the secondary IDE controller. > I have read that there is problems with some secondary IDE controllers, but > this one has worked fine with all previous version of FreeBSD (with the wdc and > acd drivers). I can't put it on the primary controller, as I already have 2 HDDs > there, and they can't be moved as they are both boot drives (one for fbsd and > the other for windoze). > > What am I doing wrong? or is it a bug that is yet to be resolved? (If so, is > there anything at all that I can do to use my cdrom in the mean time?) > > Thanks in advance, > Shaun > > (as i am no subscribed to the mailing lists, please e-mail me directly) > > > -- > ---------------------- > Shaun Dwyer > Zeus@quakeclan.net > ---------------------- > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hardware" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?008001bf97c0$8f79c360$5aa193cb>